We are the largest manufacturer, exporter and supplier of Marshall Stability Testing Apparatus in Kolhapur, India. This is used to measure the resistance to plastic flow of cylindrical specimens, that of bituminous paving mixture that is loaded on the lateral surface. They have a capacity of 5000kg and is suitable for operation on 220 volts Ac. They are designed as per the industry standards and norms using latest techniques. We handle large orders efficiently with an assurance of timely and safe delivery.

Other Details :

• It will be having digital display to measure the load up to 5000 Kg/ 50 KN
• Facility to read in kg. and KN.
• It will be supplied with load cell and LVDT to measure load and flow on the same display panel.
• Tare system to nullify initial loadThe digital LCD display will retain the peak value until it is cleared.
• Digital display of Flow value at maximum load no need of separate watch on dial gauge
• Auto cut off of electric current to motor on attaining peak load
• Provision for default calibration (self calibration)
• Load cell can also be calibrated using standard reference
• Indication of rate of travel in inch/minute.
• Panel cut out size 92 x 188 MMS.
• With PC/printer interface with software fir direct printout of calculated results (at extra cost)

We are an established manufacturer, exporter and supplier of Accelerated Curing Tank in Kolhapur, India. They are designed to cater to various applications of the automobile, defence, construction industries and research and development activities. We provide the tank in various sizes as per the requirement of the client. The accurate dimensions, rugged design and durability have led to high demand for them in the market. The curing tank can be availed from us at reasonable prices. We supply them with an assurance of timely and safe delivery.

Specifications :

• RSI-244
  
  • Accelerated Curing Tank Bs 1881-111
  • The Tank has been designed to accommodate 150 mm/70.6 mm cube Moulds & fully insulated, complete with hinged lid, heater, Digital temperature Controller & Circulated Pump.
  • Provision of two removable racks allowing free circulation of water around each Mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank.
  • The tank is heated by immeRSIon heater under normal conditions the Temperature is controlled at 35deg.C or 100 deg.C. +-2deg. These Tanks are available in various sizes. Curing Tanks are also available with cooling arrangement.
• RSI-245
  
  • Rectangular Muffle Furnace 1000 deg. C Maximum temp. 1000 deg. C grooved refractory type, working temp. 900 deg.C heating is done by embedded heater run around the chamber & controlled by Energy Regulator, the outer body is made of thick mild steel duly painted. The app. Is complete with pyrometer. The thermocouple, two neon lights with wire & plug to work on 220V 1 ph. AC.(with silicon fibre insulation)
  • Rectangular Muffle Furnace 1000 deg. C Maximum temp. 100 deg. C grooved refractory type, working temp. 900 deg.C heating is done by embedded heater run around the chamber & controlled by Energy Regulator, the outer body is made of thick mild steel duly painted.
  • Is complete with pyrometer. The thermocouple, two neon lights with wire & plug to work on 220V 1 ph. AC. (with silicon fibre insulation)
  • Muffle Size - 100x100x225 mm 125 x125 x250 mm 150x150x150 mm
  • Optional Electronic Digital Indicator cum controller instead of Energy Regulator.
• RSI-246
  
  • Water Still
  • Energy regflator to control the temperature working on 220V 1 ph. AC

We are reckoned among the leading manufacturer, exporter and supplier of Liquid Limit Device in Kolhapur, India. The device helps in determining the amount of water that is needed to liquefy a soil sample. The device is highly demanded due to the durability and reliability. They are widely used to classify the potential properties of soil material. We provide them in various dimensions as per the specification of the client at leading market prices.

Specifications :

• RSI-001
  
  • Liquid Limit Device, IS: 2720 (P-V), IS: 9259; BS: 1377ASTM, D4318:AASHTOT89.
  • Consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged.
  • The cup is raised & drop a height of 10 mm on to the hard rubber base, by the help of a lead screw provided at the back of the sliding carriage.
  • Supplied complete with Casagrande, ASTM grooving tool & Gauge block (Type A&B of IS: 9669).
• RSI-002 : Liquid Limit with Counter & Tools
• RSI-003
  
  • Liquid limit, Motorized cum hand with counter & tools.
  • Spares
  • Grooving tool ASTM (Type A)
  • Grooving tool, Casagrande (Type B)
  • Gauge block
  • Counter
• RSI-004
  
  • Cone Penetrometer Hand, IS: 2720 (P-v), BST377.
  • Determination of liquid Limit simply & quickly.
  • The unit is supplied complete with stainless steel penetration test cone 35 mm long with smooth polished surface and an angle of 30 deg.
  • Facility exists for adjusting cone height in relation to the specimen. Complete with Penetration cup brass. Scale type.
• RSI-005
  
  • Cone Penetrometer, Automatic (Universal Penetrometer).
  • Dial type electrically complete with automatic timer, weights 50 grams & 100 grams & Cone.
  • Plastic limit apparatus, IS: 2720 (P-v), BS: 1377, ASTMD4318, AASHTOT90.