IMAX B6 AC 80W Lipo / NiMH Battery Balance Charger Dual Power Input

Purity AC 100~240v or 12V DC input •Microprocessor controlled •Delta-peak sensitivity
Category Battery Charger
Tags 80W, AC, B6, Balance, battery, Charger, Dual Power, iMAX, input, Lipo / NiMH

Charge at home on 110240v or in the field on 12v. The B6-AC handles both!The IMAX B6-AC is a rock solid charger thats able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries.

View Complete Details

Ask Latest Price & Details

Multistar High Capacity 4S 10000mAh Multi-Rotor Lipo Pack

Purity Provides increased flight times of up to 20% or more when compared to standard LiPoly batteries of the same weight • Ideal for use with aerial video and FPV multi-rotor aircract
Configuration 4S1P / 14.8V / 4Cell
Constant Discharge: 10C

The all new Multistar high capacity batteries are the result of extensive testing and development with one goal in mindincreasing flight times for your multi-rotor aircraft without the penalty of added weight. We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight. What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft. We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizesconfigurations as they become available. Be sure to checkout the product video for more in-depth info about these all new high capacity multi-rotor battery packs.

View Complete Details

Ask Latest Price & Details

Multistar High Capacity 6S 16000mAh Multi-Rotor Lipo Pack

Purity Provides increased flight times of up to 20% or more when compared to standard LiPoly batteries of the same weight • Ideal for use with aerial video and FPV multi-rotor aircract
Minimum Capacity: 16000mAh
Constant Discharge: 10C

The all new Multistar high capacity batteries are the result of extensive testing and development with one goal in mindincreasing flight times for your multi-rotor aircraft without the penalty of added weight. We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight. What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft. We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizesconfigurations as they become available. Be sure to checkout the product video for more in-depth info about these all new high capacity multi-rotor battery packs.

View Complete Details

Ask Latest Price & Details

Turnigy 2200mAh 3S 30C Lipo Pack

Minimum Capacity: 2200mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 30C

Turnigy batteries are known the world over for performance, reliability and price. Its no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford. Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.

View Complete Details

Ask Latest Price & Details

Multistar LiHV High Capacity 5200Mah 4S Multi-Rotor Lipo Pack

Purity LiHV Chemistry (Requires LiHV capable charger) • Ultra high capacity LiPoly batteries designed specifically for multi-rotor use
Minimum Capacity: 5200mAh
Configuration: 4S / 14.8v / 4Cell
Constant Discharge: 10C

High Voltage Lipoly batteries (LiHV) offer greater power density than traditional lipoly batteries allowing you to increase your flight times without the penalty of added weight Multistar high capacity batteries are the result of extensive testing and development with one goal in mindincreasing flight times for your multi-rotor aircraft without the penalty of added weight. We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight. What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft. We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizesconfigurations as they become available.

View Complete Details

Ask Latest Price & Details

MultiStar High Capacity Multi-Rotor Lipo Pack 6S / 22.2v /10000mAh

Purity Ultra high capacity LiPoly batteries designed specifically for multi-rotor use • Similar size/weight as batteries of much lower capacity, making
Minimum Capacity: 10000mAh
Configuration: 6S1P / 22.2V / 6Cell
Constant Discharge: 10C

Want to dramatically increase your multi-rotor flight times without the penalty of added weight? We have just the solution!The all new Multistar high capacity batteries are the result of extensive testing and development with one goal in mindincreasing flight times for your multi-rotor aircraft without the penalty of added weight. We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight. What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft. We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizesconfigurations as they become available. Be sure to checkout the product video for more in-depth info about these all new high capacity multi-rotor battery packs.

View Complete Details

Ask Latest Price & Details

Multistar High Capacity 4S 5200mAh Multi-Rotor Lipo Pack

Purity Ultra high capacity LiPoly batteries designed specifically for multi-rotor use • Similar size/weight as batteries of much lower capacity, making
Minimum Capacity: 5200mAh
Configuration: 4S1P / 14.8V / 4Cell
Constant Discharge: 10C

The all new Multistar high capacity batteries are the result of extensive testing and development with one goal in mindincreasing flight times for your multi-rotor aircraft without the penalty of added weight. We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight. What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft. We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizesconfigurations as they become available. Be sure to checkout the product video for more in-depth info about these all new high capacity multi-rotor battery packs.

View Complete Details

Ask Latest Price & Details

FrSky X6R 6/16Ch S.BUS ACCST Telemetry Receiver W/Smart Port

Features Solid RF link • Inbuilt telemetry • Up tp 16 channels supported by S.BUS
Dimension: 47mm x 24mm x 15mm
Operating Voltage Range: 4~10.0V
Operating Current: 100mA @ 5V

While the X6R is no bigger than most other 6 channel receivers, it has much more capability. The Smart Port supports the full range of hub-less sensors as well as the older hub analog sensors and the A2 port on the bottom allows you to connect an FBVS-01 battey voltage sensor for basic external voltage monitoring by pulling the jumper out if you prefer that to the integrated telemetry. Six standard servo outputs are by the X6R and you can access all 16 channels by using the S.BUS line with S.BUS supported servos or use a FrSky S.BUS Decoder for the full 16 channels. The X6R is also backward compatible! In D8 mode it works with the DHT, DJT, DFT and DHT-U transmitter modules. In this mode you only have access to 8 channels but you still get to use the new Smart Port and digital sensors! This is the perfect receiver for the FrSky X9D Taranis, with its built in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

View Complete Details

Ask Latest Price & Details

Futaba FrSky DF 2.4Ghz Combo Pack W/ Module & RX

Purity Easy to bind and very fast link-up., Excellent reboot time., True Diversity with two antennas.
Operating voltage: 3.5~10.0V
Power consumption: 100mA
Resolution: 3072

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz RC Technology. If you think DSM2 or FASST is the best, think again! New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band. The Two-way Radio System developed by FrSky provides an additional return link that would be used for monitoring the Rxs voltage, temperature, location, speed and so on.

View Complete Details

Ask Latest Price & Details

FrSky XJT 2.4Ghz Combo Pack JR Style Telemetry Module

Purity Easy to bind and very fast link-up • Excellent reboot time • True Diversity with two antennas
Operating voltage: 6.0V-15.0V
Power consumption: 50mA
Output Power: : 100mW

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz RC Technology. If you think DSM2 or FASST is the best, think again! New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band. The X8R is in a Smaller package than previous 8 channel receivers, but has so much more capability. The new Smart Port supports the new hub-less sensors as well as the older hub analog sensors. The X8R supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.BUS Decoder for the full 16 channels. Or you can use 2 X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second. In this mode you only have access to 8 channels but you still get to use the new Smart Port and digital sensors! And even cooler is the new antenna design PCB it reports up to a 20% gain in range over their older antennas. And the X8R is Firmware Upgradeable!

View Complete Details

Ask Latest Price & Details

JR Elemetry Module FrSky DJT Combo Pack

Purity Easy to bind and very fast link-up., Excellent reboot time., True Diversity with two antennas.
Operating voltage: 3.0~16V(HV Version)
Power consumption: 30mA
Resolution: 3072

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz RC Technology. If you think DSM2 or FASST is the best, think again!New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band.

View Complete Details

Ask Latest Price & Details

XRotor 40A ESC Long Lead [OPTO]

Timing: High / Intermediate
LiPo Cells: 2-6S LiPo
Size (LxWxH): 68 x 25 x 8, 7mm

Specially optimized firmware for disc-type motors brings the outstanding compatibilityFor meeting flight requirements of multi-rotors like heavy load and long flight, we usually have to increase the motor torque and efficiency, so a lot of pilots use disc-type motors to reach those mentioned requirements. However, they overlook that the consequential compatibility issue will lead many pilots to draw back. Now our XRotor ESCs has excellent compatibility with various disc-type motors, and this can greatly reduce the possibility of air crashes caused by locked rotor. Auto Timing Adjustable & Preset Parameters for Highly Intelligent OperationAuto timing adjustment and preset parameters applicable to most applications extremely simplify operation and optimized user experience Special Core Program for Rapid Throttle ResponseThe special frame structure has made the demand over ESC response become even harsher than usual, as rapid throttle response means stable hover and swift movement. With the rapid response, Xrotor circular series ESCs definitely can handle different challenges at ease.

View Complete Details

Ask Latest Price & Details

10amp (OPTO) Hobbywing X-Rotor 250 Size ESC

Category: Hobbywing X-Rotor
Cont Current: 10A
Burst Current: 12A

The Hobbywing X-Rotor series ESC are a good quality multirotor speed controller. They have a broad range of programming features combined with a linear throttle curve. Our Hobbywing X-Rotor series controllers come with a 12 month warranty. These speed controllers are sold in western countries under various names at triple the price. We are certain you will find these to be amongst the best BESC available from Asia. User Programmable, both via controller and optional programming card. The programming card is an excellent item saving you the hassle trying to use your transmitter. It instantly displays current settings and change settings are as easy as a few button clicks.

View Complete Details

Ask Latest Price & Details

Q Brain 4 X 25A Brushless Quadcopter

Features • Convenient all-in-one ESC design, • 4 x 25A output
Input Voltage: 7.4~14.8V (2~4S lipoly)
Cont. Current: 25A x 4
BEC Type: Switching

The Q Brain provides the perfect power solution for your quadcopter by incorporating 4 x 25AESCs into one single unit. This keeps the wiring very tidy and allows you to mount this unit in the middle of the frame instead of having to mount an ESC on each arm. With adjustable low-voltage protection, startup mode and motor timing, the Q Brain is not short on programming features. This and its ability to operate on 24S lipoly or 512 cells Ni-XX makes it a very versatile ESC. The Q Brain keeps things simple by having all of the motor leads pre-installed and terminated with 3.5mm bullet connectors. There are 4 x signal leads (one with power) that will plug directly into your flight controllers ESC output ports. A throttle hub is also included for use in applications requiring the use of a shared throttle signal.

View Complete Details

Ask Latest Price & Details

ESC 2-4S 3A SBEC Q Brain 4 X 20A Brushless Quadcopter

Features • Convenient all-in-one ESC design • 4 x 20A output

The Q Brain provides the perfect power solution for your quadcopter by incorporating 4 x 20AESCs into one single unit. This keeps the wiring very tidy and allows you to mount this unit in the middle of the frame instead of having to mount an ESC on each arm. With adjustable low-voltage protection, startup mode and motor timing, the Q Brain is not short on programming features. This and its ability to operate on 24S lipoly or 512 cells Ni-XX makes it a very versatile ESC. The Q Brain keeps things simple by having all of the motor leads pre-installed and terminated with 3.5mm bullet connectors. There are 4 x signal leads (one with power) that will plug directly into your flight controllers ESC output ports. A throttle hub is also included for use in applications requiring the use of a shared throttle signal.

View Complete Details

Ask Latest Price & Details

Afro ESC BEC V3 12Amp UltraLite Multirotor

Current Draw: 12A Continuous
Voltage Range: 2-4s Lipoly
Input Freq: 1KHz

Enter Simon and Hamasaki AKA SimonK and timecop. This combination of hardware and firmware expertise in conjunction with the Hobbyking in house engineering team gave us the edge needed to develop an ESC like no other and hence the Afro series was born. Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the Afro ESC series are set to change the expectations of multi-rotor pilots around the globe. The Afro ESC series ship with multi-rotor specific SimonK software preloaded! No need to reflash. For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink. MikroKopter I2C compatibility has also been built in as standard. A DIY port is available under the shrink wrap which allows using the ESC with MikroKopter hardware that uses I2C control.

View Complete Details

Ask Latest Price & Details

Stabilized 4k Camera DJI Quad Copter

Features Brushless gimbal stabilized 4K camera • Camera shoots 12MP stills • 720p HD App-Based Monitoring
Weight: 1280g (including battery and props)
Multirotor diameter: 689mm

The Phantom 3 Professional continues the proud tradition of DJIs Phantom series and brings several important innovations to the Phantoms rich feature set. The Phantom 3 Professional carries a fully stabilized 3-axis 4k UHD video camera for smooth, crisp videos and still photos.

View Complete Details

Ask Latest Price & Details

Stabilized 4k Camera DJI Quad Copter

Features Brushless gimbal stabilized 4K camera • Camera shoots 12MP stills
Multirotor diameter: 689mm
Max Ascent Speed: 5 m/s
Max Descent Speed: 3 m/s

The Phantom 3 Professional continues the proud tradition of DJIs Phantom series and brings several important innovations to the Phantoms rich feature set. The Phantom 3 Professional carries a fully stabilized 3-axis 4k UHD video camera for smooth, crisp videos and still photos.

View Complete Details

Ask Latest Price & Details

Walkera G-2D Brushless Camera Gimbal

Work current: 200 mA – 500 mA
Working environment temperature: -15-65C
Maximum angular rate: 2000 deg/ SEC

Walkera G-2D gimble is specifically designed for Gopro Hero3 camera, adoping aluminum alloy CNC frame, brushless motor, high accuracy intelligent electronic control system. Can be utilized to filming and advertising aerail photography etc.High precise and stable frame design to make sure the camera control accurately during high-speed flying and take the best aerial photography pictures and videos. The multifunctional autonomous two-axis gimbal Brushless Walkera G-2D was developed specifically for helimulticopters such as X350 or the new X800. The gimbal is ready to use, assembled and configured (Plug & Play). GoPro Hero 3 and 3 + are supported. Sony Action cams like AS 15 or AS 30 should also be supported. In addition, Walkera has announced its own All in one camera: Walkera iLook. This HD camera sends the video over a 5.8GHz connection directly directly to the ground station. The G2D Gimbal controller can be updated with the UP-02 adapter.

View Complete Details

Ask Latest Price & Details

X-CAM A10-3H 3 Axis 360Deg Rotation GoPro Camera

Feature 5 chs of adjustment over Sbus • Sbus and PPM support • Home sensors
Weight: 280g ( without GOPRO )
Stabilization frequency: 5200Hz
Input voltage: 7.4v ~ 16.8v ( 2S ~ 4S Lipo )

The X-CAM A10-3H Gimbal it at the top of the list when it comes to gimbals, the A10 has True continuous rotation 3-Axis ability with AV Video link transfer. Full control over Roll, Tilt, Yaw, Mode and Zero home. And charging with AV out transfer for the GoPro hero camera. There are a lot of 3 Axis gimbals on the market, but only a few that use a slipper for true 360Deg continues rotation and also transfers the AV output from the GoPro to the top controller for VTX use. The AV line also powerscharges the GoPro. Another key feature on the X-CAM is its ability to go to zero or home using referencing sensors, this is great for when transitioning from a yaw control to a forward flight mode the gimbal will auto go to the front position. The A10 uses an advanced method of vibration control and mounting and is a full CNC aluminum frame design with integrated motors for a light 280g weight.

View Complete Details

Ask Latest Price & Details

FeiyuTech G3 3-Axis Brushless Gimbal

Purity 3 Axis • Yaw, Pitch and mode RC inputs • can be mounted inverted for aircraft use
Country of Origin : 9~17v input
Weight: 206g
RC Input: Yaw, Pitch, Mode

FeiyuTech has released their 3-axis version of their popular G3 line of gimbals. The G3 line has some very distinct design elements that make it stand out from the sea of other options, the most notable is the integration of controllerdriversmotors all in one. There is no external exposed control board to contend with, this mixed with their minimal CNC aluminum frame makes this one of the cleanest and easiest gimbals to use. There controller is recognized by PROs as one of the smoothest and offers 3 modes of stabilization. The gimbal can also be mounted inverted to be used on an aircraft.

View Complete Details

Ask Latest Price & Details