Reeva International

bore well submersible pump

• Phase Single
• Head in Meter 4 to 113
• Discharge in LPM 15 to 85
• H.P. 0.5 to 1.5
• Stage 6 to 25

V-3 3" Bore well Submersible Water Filled Pump sets with S.S. Body suitable for 78 mm Bore Dia in Single Phase - 220 Volts - 50 Hz   Our provided submersible pump is precisely designed to be utilized in 3 inch dia wells or larger. In sync with the quality standards, the offered pump is manufactured using quality approved basic material and high-end technology. Provided submersible pump is highly acclaimed by our esteemed clients, owing to its various quality features and cost-effectiveness. Features:  Rigid construction Easy maintenance Corrosion resistance

• Sr.	Motor Part Name	Material
  1	Rotor Shaft	SS 410
  2	Stator Body / Casing	S.S. 202
  3	Housing	C.I. Gr. FG250 IS 210
  4	Base	C.I. Gr. FG250 IS 210
  5	Thrust Bearing	S.S. 304
  6	Thrust Plate	Carbon
  7	Bearing Diaphragm	Nitrite Rubber
  8	Bearing Bush	LTB - 4 Grade as per IS : 318
  9	Stamping	CRNO Low - Loss Electrical Stamping ( Highly Efficient )
  10	Rotor	E.C Grade Copper
  11	Winding Wire (Tape Wrapped)	E.C. Grade Copper

• Sr.	Pump Part Name	Material
  1	Casing / Bowl	Noryl
  2	Impeller	Noryl
  3	NRV Body	C.I. Gr. FG250 IS 210
  4	Suction Casing	C.I. Gr. FG250 IS 210
  5	Pump Shaft	SS 410
  6	Pump Sleeve	SS 410
  7	Pump Bush	Nitrile Rubber and LTB - 4 Grade as per IS : 318

high speed Sewage Submersible Pump

• Capacity Up to132 m3hr
• Head Up to 40 Mtr.
• Temperature 45°C
• HP 0.75 to 10 (1 to 3 HP in single phase)
• RPM Up to 2880
• Delivery Size 32 mm to 100 mm
• Solid Size 50 mm
• Connection DOL
• Voltage & Phase 415 V , 3 Phase / 215 V, 1 Phase Up to 3 HP
• Insulation/Protection ‘F’ Class / IP 68
• Motor Two pole continues duty dry type squirrel cage nduction Motor
• Cable PVC Insulated Double heated Copper Conductor Flexible Cable
• M.O.C. C.I, C.S.

Applications :         Muddy water transfer.       Swimming pool.       Dewatering of ponds, basement of huge building.       Power plant..       Effluent transfer, ETP, STP, waste water treatment plant.               Used in hotel, hospitals, railways, dairy, chemical ind, sugar, steel, cement, food beverages etc…

Low Speed Sewage And Effluent Submersible Pump

• Capacity Up to 500 m3/hr
• Head Up to 45 Mtr.
• Temperature 45°C
• HP 2 to 50
• RPM Up to 1500
• Delivery Size 65 mm to 200 mm
• Solid Size 100 mm
• Connection DOL, Star Delta, ATS
• Voltage & Phase 415 V , 3 Phase
• Motor Four / Six pole continues duty dry type squirrel cage nduction Motor
• Cable PVC Insulated Double heated Copper Conductor Flexible Cable
• Insulation/Protection ‘F’ Class / IP 68
• Mechanical Seal Bi-Directional Twin Mechanical Seal with Various face combination looking to the application.
• M.O.C. C.I, C.S.

Applications :         Muddy water transfer.       Swimming pool.       Dewatering of ponds, basement of huge building.       Power plant..       Effluent transfer, ETP, STP, waste water treatment plant.               Used in hotel, hospitals, railways, dairy, chemical ind, sugar, steel, cement, food.       beverages etc...

Horizontal Open Well Submersible Pumps

V7  Horizontal Monoset Openwell Pumps with S.S. Body in Single Phase-220 Volts & Three Phase-415 Volts in 50 Hz   By keeping track with the market development, we are offering optimum quality V7 Horizontal Openwell Pumpset that is used in agricultural, industrial, domestic & gardening purpose. Offered pumpset is manufactured using quality proven components and advanced technology with the quality standards. Moreover, our provided pumpset is highly appreciated in the market for its contemporary design and optimum operations. Clients can avail the entire range from us at pocket friendly prices. Features: Smooth finish Efficient performance Sturdy construction

• Phase	Single	Three
  Head In Meter	4 to 28	4 to 28
  Discharge in LPM	20 to 785	60 to 925
  H.P.	0.5 to 3	1 to 5
  Stage	1	1
  Outlet Size	1" x 1", 1.5" x 1.5", 2" x 2", 2.5" x 2.5", 2.5" x 2"	1" x 1", 1.5" x 1.5", 2" x 2", 2.5" x 2.5", 2.5" x 2"

• Sr.	Part Name	Material
  1	Rotor Shaft	SS 410
  2	Stator Body / Casing	S.S. 202
  3	Housing	C.I. Gr. FG250 IS 210
  5	Thrust Bearing	S.S. 304
  6	Thrust Plate	Carbon / Fiber
  9	Stamping	Low - Loss Electrical Stamping  ( Highly Efficient )
  10	Rotor	E.C Grade Copper
  11	Winding Wire (Tape Wrapped)	E.C. Grade Copper