Unicorn concrete finishing power trowel machine is widely used for concrete surface finishing and smoothing work of high-standard workshop, warehouse, parking lot, square, airport, concrete road and frame style building. The working efficiency of the float machine is much higher than the formal manual trowel. Unicorn walk behind concrete power float trowel machines are durable and high efficiency. They are powered by Honda GX270 gasoline engine. The 24inch trowel blades are made of 2.0mm thickness spring steel. The float trowel pan is made of 3.0mm thickness manganese steel and it help the machine have years of high performance. And, our high strength steel handle provides maximum comfort and control. 

Features 

• Independent rotating flywheel, allowing operation in tight corners and in confined spaces.
• Over-built gearbox assures long service life.
• Height adjustable handle, assures operator comfort & easy control. Screw control ensures precise blade adjustment.
• Heavy type clutch make "leave" and "close" closely. Aluminum reducer case is not only light, but also has best heat radiating function. 

Unicorn 1 m concrete ride on power trowel machine could greatly increase concrete smoothing and finishing work efficiency for surface of concrete raised paste and trowel, smooth out. Widely used in building large area ground like factory, warehouse, road and square. Unicorn Ride-on concrete power trowel could greatly increase work efficiency for surface of concrete raised paste and trowel, smoothing. Widely used in building large area ground like factory, warehouse, square and so on. 

Special Features 

• Ride-on operation reduces intensity of labor and increase efficiency of work.
• With dual rotor, much heavier weight and much better compaction, the efficiency is higher than walk behind power trowel. Anon-overlapping is designed for two pans working.
• Mechanism type steering system with rapid response and easy control.
• Low barycenter design provides stable operation.
• A strong power supplied by Honda or Kohler gasoline engine.
• Safety switch can shut off the engine immediately and ensure the maximum security. Sprinkler is available, slowing down the concrete drying.
• Fixed wheels for easy transportation. 

Stirrup bending machine has another name called ring making machine. This machine is with a wide range of being used in building and construction industries. Stirrup making machine to some extent is one kind of bar bending machine, but it has some functions that the normal bending machine does not have. Stirrup bender can bend bar, rebar, reinforcing bar and steel within 180° into different forms according to different settings, for example, triangle, quadrangle, pentagram, polygon and ring. Besides, this machine can also bend metals into "U" shape. ThaCs why stirrup bending machines are also called U-bending tools. Unicom automatic Stirrup Bending Machine is Most Durable, Rugged, Stable Bending Machine to bend dia from 4m.m to 20m.m.Bar Bending machine (GF-20) is specially designed for heavy Duty rebar and high on demand for construction job site application. Such as simple bending process, high work efficiency, convenient angle for adjustment and neat bending results. The function of stirrup bending machine is to bend bars into varieties of shapes according to different requirements, such as rectangle, square and other simple shapes. Unicom automatic stirrup bending machine can bend round steel bar with diameters from 4mm to 20mm. Both the processing scope and the extemal adjuster are optional, so this type of machine is quite convenient to use. UNI 20 & UNI 20D are similar to each other. Their structure is relatively simple and their work capacity is relatively lower compared with the othertwo sizes of stirrup machines. But they are very flexible to operate. These bar machines have a button that can switch bending angles from 90° to 135° directly, because these two arcs are more often being used. Besides, our Unicom stirrup machines are able to bend bars into any other angles with 180% Because GW20 & GF20 are semi-automatic, they can be easily operated by hand to decide what arcs you want to make. GF20 is the machine with a numerical control panel from a wide range of round bar with diameters between 4mm and 20mm. You can set a certain angle within 180° on the control panel. It is easy and reliable to operate. This automatic stirrup bender can save labor and improve efficiency of processing bars. 

Application : GW20 & GF20 Steel bar bending machine can be used efficiently to bend ordinary carbon steel, hot-rolled steel, screw bar, flat bar, square bar and angle steel bar which are widely used in machining and construction project. 

Features

• Compact structure 
• Stable performance 
• Coppery motor 
• Flexible and easy to operate 
• Good steel work disk 
• High working efficiency 
• Strong durability 
• Easy to maintain 
• Equipped with international standard copper motor, ultra-high hardness accessory and adjustable fender.
• Adopt 6mm thick top plate, high rigidity disk, adjustable stylobate, the bending angle of more efficient. 
• Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate. 

Stirrup bending machine has another name called ring making machine. This machine is with a wide range of being used in building and construction industries. Stirrup making machine to some extent is one kind of bar bending machine, but it has some functions that the normal bending machine does not have. Stirrup bender can bend bar, rebar, reinforcing bar and steel within 180° into different forms according to different settings, for example, triangle, quadrangle, pentagram, polygon and ring. Besides, this machine can also bend metals into "U" shape. ThaCs why stirrup bending machines are also called U-bending tools. Unicom automatic Stirrup Bending Machine is Most Durable, Rugged, Stable Bending Machine to bend dia from 4m.m to 20m.m.Bar Bending machine (GF-20) is specially designed for heavy Duty rebar and high on demand for construction job site application. Such as simple bending process, high work efficiency, convenient angle for adjustment and neat bending results. The function of stirrup bending machine is to bend bars into varieties of shapes according to different requirements, such as rectangle, square and other simple shapes. Unicom automatic stirrup bending machine can bend round steel bar with diameters from 4mm to 20mm. Both the processing scope and the extemal adjuster are optional, so this type of machine is quite convenient to use. UNI 20 & UNI 20D are similar to each other. Their structure is relatively simple and their work capacity is relatively lower compared with the othertwo sizes of stirrup machines. But they are very flexible to operate. These bar machines have a button that can switch bending angles from 90° to 135° directly, because these two arcs are more often being used. Besides, our Unicom stirrup machines are able to bend bars into any other angles with 180% Because GW20 & GF20 are semi-automatic, they can be easily operated by hand to decide what arcs you want to make. GF20 is the machine with a numerical control panel from a wide range of round bar with diameters between 4mm and 20mm. You can set a certain angle within 180° on the control panel. It is easy and reliable to operate. This automatic stirrup bender can save labor and improve efficiency of processing bars. 

Application : GW20 & GF20 Steel bar bending machine can be used efficiently to bend ordinary carbon steel, hot-rolled steel, screw bar, flat bar, square bar and angle steel bar which are widely used in machining and construction project. 

Features

• Compact structure 
• Stable performance 
• Coppery motor 
• Flexible and easy to operate 
• Good steel work disk 
• High working efficiency 
• Strong durability 
• Easy to maintain 
• Equipped with international standard copper motor, ultra-high hardness accessory and adjustable fender.
• Adopt 6mm thick top plate, high rigidity disk, adjustable stylobate, the bending angle of more efficient. 
• Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate. 

Reversible Plate compactor for soil compaction (UNI 150) The Unicorn reversible plate compactor is ideal for smaller jobs like trenches, retaining walls & other narrow areas or tight areas. The Vibratory Plate Compactor (Reversible) is designed for compacting loose, granular soils, gravel, paving stones & asphalt. It is intended to be used in confined areas & areas next to structures such as walls, curbs, & foundations. Plate Compactors with water tank can be used for compacting asphalt. The Plate compactor is not recommended for the compaction of cohesive soils with heavy clay content. For cohesive soils, use a Tamping Rammer.

Advantage

• Reverse plate compactor makes it more convenient to operate.
• Ductile iron base plate provides better durability.
• Open plate provides self cleaning.
• Radius base plate for easy access to corners.
• Sealed belt cover to prevent sand and soil in.
• Heavy-duty shock mounts reduce vibration to the upper engine & handle.
• Plate compactor with wear-resistant base plates open design reduces dirt building.
• Plate compactor with wrap around protection frame protects the compactor from accidental

Unicorn concrete finishing power trowel machine is widely used for concrete surface finishing and smoothing work of high-standard workshop, warehouse, parking lot, square, airport, concrete road and frame style building. The working efficiency of the float machine is much higher than the formal manual trowel. Unicorn walk behind concrete power float trowel machines are durable and high efficiency. They are powered by Honda GX270 gasoline engine. The 24inch trowel blades are made of 2.0mm thickness spring steel. The float trowel pan is made of 3.0mm thickness manganese steel and it help the machine have years of high performance. And, our high strength steel handle provides maximum comfort and control. 

Features 

• Independent rotating flywheel, allowing operation in tight corners and in confined spaces.
• Over-built gearbox assures long service life.
• Height adjustable handle, assures operator comfort & easy control. Screw control ensures precise blade adjustment.
• Heavy type clutch make "leave" and "close" closely. Aluminum reducer case is not only light, but also has best heat radiating function. 

Unicorn 1 m concrete ride on power trowel machine could greatly increase concrete smoothing and finishing work efficiency for surface of concrete raised paste and trowel, smooth out. Widely used in building large area ground like factory, warehouse, road and square. Unicorn Ride-on concrete power trowel could greatly increase work efficiency for surface of concrete raised paste and trowel, smoothing. Widely used in building large area ground like factory, warehouse, square and so on. 

Special Features 

• Ride-on operation reduces intensity of labor and increase efficiency of work.
• With dual rotor, much heavier weight and much better compaction, the efficiency is higher than walk behind power trowel. Anon-overlapping is designed for two pans working.
• Mechanism type steering system with rapid response and easy control.
• Low barycenter design provides stable operation.
• A strong power supplied by Honda or Kohler gasoline engine.
• Safety switch can shut off the engine immediately and ensure the maximum security. Sprinkler is available, slowing down the concrete drying.
• Fixed wheels for easy transportation. 

Stirrup bending machine has another name called ring making machine. This machine is with a wide range of being used in building and construction industries. Stirrup making machine to some extent is one kind of bar bending machine, but it has some functions that the normal bending machine does not have. Stirrup bender can bend bar, rebar, reinforcing bar and steel within 180° into different forms according to different settings, for example, triangle, quadrangle, pentagram, polygon and ring. Besides, this machine can also bend metals into "U" shape. ThaCs why stirrup bending machines are also called U-bending tools. Unicom automatic Stirrup Bending Machine is Most Durable, Rugged, Stable Bending Machine to bend dia from 4m.m to 20m.m.Bar Bending machine (GF-20) is specially designed for heavy Duty rebar and high on demand for construction job site application. Such as simple bending process, high work efficiency, convenient angle for adjustment and neat bending results. The function of stirrup bending machine is to bend bars into varieties of shapes according to different requirements, such as rectangle, square and other simple shapes. Unicom automatic stirrup bending machine can bend round steel bar with diameters from 4mm to 20mm. Both the processing scope and the extemal adjuster are optional, so this type of machine is quite convenient to use. UNI 20 & UNI 20D are similar to each other. Their structure is relatively simple and their work capacity is relatively lower compared with the othertwo sizes of stirrup machines. But they are very flexible to operate. These bar machines have a button that can switch bending angles from 90° to 135° directly, because these two arcs are more often being used. Besides, our Unicom stirrup machines are able to bend bars into any other angles with 180% Because GW20 & GF20 are semi-automatic, they can be easily operated by hand to decide what arcs you want to make. GF20 is the machine with a numerical control panel from a wide range of round bar with diameters between 4mm and 20mm. You can set a certain angle within 180° on the control panel. It is easy and reliable to operate. This automatic stirrup bender can save labor and improve efficiency of processing bars. 

Application : GW20 & GF20 Steel bar bending machine can be used efficiently to bend ordinary carbon steel, hot-rolled steel, screw bar, flat bar, square bar and angle steel bar which are widely used in machining and construction project. 

Features

• Compact structure 
• Stable performance 
• Coppery motor 
• Flexible and easy to operate 
• Good steel work disk 
• High working efficiency 
• Strong durability 
• Easy to maintain 
• Equipped with international standard copper motor, ultra-high hardness accessory and adjustable fender.
• Adopt 6mm thick top plate, high rigidity disk, adjustable stylobate, the bending angle of more efficient. 
• Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate. 

Stirrup bending machine has another name called ring making machine. This machine is with a wide range of being used in building and construction industries. Stirrup making machine to some extent is one kind of bar bending machine, but it has some functions that the normal bending machine does not have. Stirrup bender can bend bar, rebar, reinforcing bar and steel within 180° into different forms according to different settings, for example, triangle, quadrangle, pentagram, polygon and ring. Besides, this machine can also bend metals into "U" shape. ThaCs why stirrup bending machines are also called U-bending tools. Unicom automatic Stirrup Bending Machine is Most Durable, Rugged, Stable Bending Machine to bend dia from 4m.m to 20m.m.Bar Bending machine (GF-20) is specially designed for heavy Duty rebar and high on demand for construction job site application. Such as simple bending process, high work efficiency, convenient angle for adjustment and neat bending results. The function of stirrup bending machine is to bend bars into varieties of shapes according to different requirements, such as rectangle, square and other simple shapes. Unicom automatic stirrup bending machine can bend round steel bar with diameters from 4mm to 20mm. Both the processing scope and the extemal adjuster are optional, so this type of machine is quite convenient to use. UNI 20 & UNI 20D are similar to each other. Their structure is relatively simple and their work capacity is relatively lower compared with the othertwo sizes of stirrup machines. But they are very flexible to operate. These bar machines have a button that can switch bending angles from 90° to 135° directly, because these two arcs are more often being used. Besides, our Unicom stirrup machines are able to bend bars into any other angles with 180% Because GW20 & GF20 are semi-automatic, they can be easily operated by hand to decide what arcs you want to make. GF20 is the machine with a numerical control panel from a wide range of round bar with diameters between 4mm and 20mm. You can set a certain angle within 180° on the control panel. It is easy and reliable to operate. This automatic stirrup bender can save labor and improve efficiency of processing bars. 

Application : GW20 & GF20 Steel bar bending machine can be used efficiently to bend ordinary carbon steel, hot-rolled steel, screw bar, flat bar, square bar and angle steel bar which are widely used in machining and construction project. 

Features

• Compact structure 
• Stable performance 
• Coppery motor 
• Flexible and easy to operate 
• Good steel work disk 
• High working efficiency 
• Strong durability 
• Easy to maintain 
• Equipped with international standard copper motor, ultra-high hardness accessory and adjustable fender.
• Adopt 6mm thick top plate, high rigidity disk, adjustable stylobate, the bending angle of more efficient. 
• Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate. 

Reversible Plate compactor for soil compaction (UNI 150) The Unicorn reversible plate compactor is ideal for smaller jobs like trenches, retaining walls & other narrow areas or tight areas. The Vibratory Plate Compactor (Reversible) is designed for compacting loose, granular soils, gravel, paving stones & asphalt. It is intended to be used in confined areas & areas next to structures such as walls, curbs, & foundations. Plate Compactors with water tank can be used for compacting asphalt. The Plate compactor is not recommended for the compaction of cohesive soils with heavy clay content. For cohesive soils, use a Tamping Rammer.

Advantage

• Reverse plate compactor makes it more convenient to operate.
• Ductile iron base plate provides better durability.
• Open plate provides self cleaning.
• Radius base plate for easy access to corners.
• Sealed belt cover to prevent sand and soil in.
• Heavy-duty shock mounts reduce vibration to the upper engine & handle.
• Plate compactor with wear-resistant base plates open design reduces dirt building.
• Plate compactor with wrap around protection frame protects the compactor from accidental