Other Products / Services #1235093

It is a device which can be used by any mobile equipment. It provides a quick and efficient solution to low resistance earthing requirements of Telecommunication.

Mobile Eathing :Mobile earth is the new generation portable earthing device, which can be used bt any mobile equipment. It provides a quick and efficient solution to low resistance earthing requirements of Telecommunication, electronic and electical equipment.
Mobile earth effectively protects sensitive equipment by safely conducting harmful VHF, harmonics, surges, spikes, unbalanced and short circuit currents into ground mass. It can be installed vertically or horizontally as per site conditions and convenience.
The Mobile earth can also be used as earth for lightning protection. However for ESE LPS the code stipulates three earth pits connected in star or delta, which has to be followed.

Technical Parametres :

• Resistance in vertical setting : 32.5% of soil resistivity at the location.
• Resistance in horizontal setting : 21.05% of soil resistivity at the location.
• Unbalanced current withstand capacity : 6.28 Amperes
• Short duration term Duty : 596.60 Amperes

Physical Data :

• Body material : SS 304L.
• Central Conduction : Spl corrosion resistance SS.
• Size : 65 mmdiax 1.2m long.
• Weight : 3 kgs, appx.

Infill Compound (Eric+ chemical compound in granular form as under) :

• Granulometry : 0.85mm to 4mm/gray color and odorless.
• Volumetric mass : 500-650kg per cum (compressed)/450-500kg(uncompressed)
• Solubility in water : Partially soluble 1000gm per lit@ 20oc
• pH Value : 6.9-7.2.

Number of Operatons :Upto 75 times or 2 years. The mobile earth has to be wiped by wet cloth after every use and stored back. It should not be washed in flowing water. Evey time it it put inside the ground (for what so ever small time) is considered as a usage count.

Installation Procedure :

• Vertical setting : Drill a 150 mm dia X1.5 m deep bore in the ground & place mobile earth such that the handle is above the ground. Back fill the bore with loose earth slurry. Depending on soil resistivity and desired Pit resistance (PR), connect to another Mobile earth at least 1.2m away, if lower PR is required.
• Horizontal Setting : Make a 600mm wide x 900 mm deep x 1500 mm long trench in the ground. Fill the first 300 mm with soil slurry. Place the mobile earth horizontally in the trench. Backfill the trench with loose earth slurry. Depending on soil resistivity and desired Pit resistance (PR), connect with another mobile earth parallel at least 1.2 m away, if lower PR is required.
• De-installation : After the operations are over and earthing is not required, pull the mobile earth out of the ground in case of vertical setting and after digging top eath layer in case of horizontal setting to pull it out of the trench. Clean softly and repack for future use.

To maintain the high-quality standards, we follow strict quality standards throughout. Owing to our huge logistics network, timely delivery of the placed orders is always executed!

We are Lucknow(India) based entity and have become a primary choice of the buyers owing to our timeliness. Trustworthy shipping facilities, competent workforce and prompt delivery of the products make us stand out in the industry.

We are the exporter and supplier of this products.

We are Uttar Pradesh, India based firm instrumental in providing Lighting Installation services to our worthy clients across the country. Ours is a team of technicians and professionals who coordinate with clients and work as per their requirements. We make use of modern work methods for completing the assigned task. Over the years, we have successfully gained a long list of satisfied clients. Our specialization lies in installing :

• Protart ESE Lightning condutors (Protart-60 and Protart-80)
• Pole CLP
• Unit adapter
• Conductor jointing clamps
• Pole Clip
• Holders for isolated
• Floors/ Roofs
• Down Conductors
• Lightning counter
• Test Clamps
• Earthing
• Rod Clamps
• Earthing Rods
• Earthing Restivity Decrease Material
• Galvanized Pipe
• Protection Pipe
• PVC Interior Insulated

Improve the earthing effectiveness by choosing the ERIC ION Backfill Compound. Having superior conductive enhancement material, the ERIC ION Backfill Compound is suited for areas with poor conductivity: generally areas with moisture, sand, soil, rock ground, and the like. The ERIC ION Backfill Compound is designed as per IEEE 80- 2000 Clause 14.5b. Further, the ERIC ION Backfill Compound is specifically designed as per the Earthing systems present all over the globe. Details

• Ionic Chemical - Salts creates ions for easy conduction
• Expansion Chemicals â Expands 18 to 20 times and removes entrapped air
• Dispersion chemicals - Spreads the salts equally in the Earth Pit
• Hygroscopic Chemicals - Absorbs atmospheric and surrounding moisture and retain it in the soil.

Advantage

• Artificial Treatment Compound
• High corrosion resistance- Enhances the life of earth electrode.
• Highly hydroscopic â Mixes homogeneously with soil and one set stable for life.
• Environments Friendly
• Saved Equipments form ground faults.
• pH Neutral & corrosion inhibitors â enhances the life of the electrode
• Maintenance free â No periodic charging/ treatment / replacement required
• Environmentally safe â Does not contain any hazardous chemicals.
• Application â suitable for vertical and horizontal strip electrode installations.

Designed using carbonaceous material, the Eric Ultra Backfill Compound is apt for even the most demanding of ecological and electrical environments found in diverse industrial sectors. The Eric Ultra Backfill Compound enhances reliability, performance and longevity of any grounding system. Further, the Eric Ultra Backfill Compound reduces levels of impedance. Primarily used in lightning protection system, the Eric Ultra Backfill Compound has high resistance to corrosion. Features

• It is environmental friendly.
• It is having conductivity, improves earth humidity, retention capability.
• It is suitable for installation in dry form or in a slurry form.
• It is non â�� corrosive and highly hygroscopic.
• It will not dissolve, decompose or leach out with time.
• It is high corrosion resistance - Enhance the life of earth electrode.
• Stable â�� Sets like concrete does not expand or shrink dissolve or leach out. Can be used in dry slurry form,
• It gets solidified by absorbing the moisture in the surrounding soil.
• It is maintenance free chemical no periodic charging/treatment/replacement required.
• It is suitable for vertical and horizontal strip electrode installations.

Applications

• Lightning protection and grounding systems
• Electrical protection and grounding systems, especially where personnel safety is of paramount concern
• Virtually any industrial, commercial, municipal or domestic grounding system installed to reduce EMF and provide a safe working environment
• Electrical noise mitigation and suppression systems
• Electrical transmission lines in utility and transportation corridors
• Any type of grounding or deep anode CP systems to be installed in environmentally sensitive areas, especially where preventing aquifer contamination is a critical concern.

We are offering Eric (earth resistance improvement compound). eric back fill compound is a specially developed compound containing eco friendly materials. It is capable of absorbing & retaining moisture for a long period. It reduces the soil resistivity. It helps in faster dissipation of fault current, least fluctuation of ohmic value and it eliminates the use if salt & charcoal around the electrode. It is easily compacted & when water is added, it absorbs 13 times its dry volume. It continuously holds to its own shape & adheres to any surface it touches. These capabilities resolve the issues of compatibility & soil rod contact that are crucial to earthing system eric absorbs whatever moisture is present and maintains within itself, in contrary to surface appearances. Maintains moisture within the sphere of influence of electrode. The b.f.c. Will cause the low soil receptivity around electrode, which results in a significantly lower earth resistance, that could not otherwise be obtained using a conventional earth electrode installation eric bag comes in 20 and 30 kg.

We are offering e.s.e. (early streamer emission) lightning conductors protect actively, on a large scale and reliable. The ion generator inside allows the lightning conductor to intercept and catch a potentially dangerous lightning strike earlier than simple rod conductors and ground it safely. technical features:model: s-atype: e.s.e. Lightning conductor(early streamer emission)t: 60 s (nf c 17-102)t (real): 68 s (tested)material: stainless steelsize: 59 cm x 12 cmweight: 2, 8 kg

Pro LSC works based on the inductive field principle of the lightning strike, when a lightning strike occurs and as the current travels through the down conductor; it operates the transformer device the analog counter by a digit which is visible on the facade of the product.

Technical Detail:

• 6 digit analog counter (Non-Resetable)
• Detecting currents from 2 to 100 kA.
• Is not subject to an external power supply.
• Simple asseembly.

Keen on procurement of GI Chemical Earthing Electrodes? We are one of the well known GI Chemical Earthing Electrodes Suppliers We are Lucknow(India) based organization, involved in providing high quality array of products at competitively low prices.

Our company is one of the leading dmsgi & protector manufacturers and suppliers in uttar pradesh, india. Dmsgi, that we offer, is an ese type of active lightening conductor, which efficiently protects the particular region as per the nf c 17102. We use high-end apparatus in the making of dmsgi & protector. qualities of dmsgi & protector

• requires easy installation
• made of stainless steel (grade 304 l)
• robust make
• corrosion resistant
• why our dmsgi & protector?
  • made as per the iso instructions
  • warrantee for two years
  • certified by odtu university laboratories in turkey (europe)
  • external power source is not required
  • market leading prices
  • features
    • dmsgi is an ese type of 'active' lightning conductor that provides zonal protection in accordance with standard nf c 17 102
    • the protector is a sturdy robust device made of 304 l stainless steel
    • it is protected against corrosion and needs no maintenance
    • needs no external power source
    • compact and easy to install
    • warrantee for 2 years
    • tested and certified by odtu university laboratories in turkey (europe)
    • applications protector
      • large multistoried high-rise office complexes, multiplexes, shopping malls, etc.
      • modern buildings housing it offices, bop's and concentration of sensitive electronic and or telecom equipment
      • hospitals, cinema halls, museums, old monuments, schools etc.

We are operational from Uttar Pradesh, India and actively involved in providing top-notch Earthing services. With our services, we make use of different installation tools and methods ensuring safety of persons. Furthermore, our associates liaise with clients to find out their particular requirements and work accordingly. Protective conductors and modern installation methods are used to completing the undertaken job. To know more about us and our services, reach us anytime 24x7.

ESE Lightning Arrester Tester With Pro Tester, your are able to determine if there is a shot circuit or a fault in the ion generator immediately by simply screwing in the special plug at the end of the cable to the ESE rod and pressing the button on the testing device. We are able to make the cable length on the testing device according to the customer's requirements.

We are the exporter and supplier of this products.

Exothermic Welding System requires no outside source of power or heat. The Exothermic Welding System is also light and portable that makes it ideal for field use. Exothermic Welding System provides simple, cost effective, permanent connections using a high temperature exothermic reaction. This Exothermic Welding System requires no external heat source, portable fault tolerant, highly conductive and corrosion resistant. Most of the exothermic welding connections have at least twice the cross-sectional area of the conductors being joined. Exothermic Welding System is tolerant to repeated fault currents, highly conductive, permanent and demonstrates excellent corrosion resistance. Making an exothermic welding joint is a simple procedure which requires a mold, weld powder, handle clamp and exothermic welding tools. Exothermic Welding System uses semi-permanent graphite mold, to form electrical connections mainly between copper to copper or copper to steel. Standards Followed :

• IEEE 87
• UL Listed

Salient Features :

• Long Life & Reliable
• Permanent Connection
• Low milli-Volt drop.
• Mobile & Easy to Use
• Welding in few seconds

Applications :

• Railways & Airport
• Sub-Station & Nuclear plant
• Buildings & DATA Center
• Cathodic Protections

Be it any place or time; we make on time deliveries of the goods to the customers. Since, we are famous suppliers of Earthing Accessories, buyers can place order with us and quote their prices.

Surge Protection Devices work on the theory of surge protection. We offer a wide range of Surge Protection Devices at very affordable price range. Overvoltage is any voltage, whose peak value exceeds the appropriate peak value of the highest operating voltage in the LV power system. Overvoltage is usually an accidental phenomenon, which differs in time history and the place of its occurrence. Its parameters are defined by its cause (lightning stroke, switching in heavy-current network and so on) and also by electrical character of the circuit (wave resistance, ending, impedance, discharge ability and, so on). In the past few years, the range of current and voltage courses for different uses has been standardized. These courses enable implementation of testing on equipment and constructive elements under the same conditions. In the following text the most important parameters of the most used standardized courses will be defined (according to EN 61 643-11, IEC 60-1 and CSN 34 5640). Thus, Surge Protection Devices are required to get protection from the conditions related to overvoltage.

We offer secured online and offline payment processing methods. The transaction, done through online mode, is instantly forwarded to the payment system. We also accept bank account transfers, cash payments, etc. We have superior storage capacity to safely store the extensive product range that we offer. Our massive and well-maintained storage space is well-connected with the shipping unit.

Portart-30 ESE Lightning Conductor is manufactured from high quality stainless steel which makes it durable against the toughest weather conditions.
When there is change in the electro magnetic field in the atmosphere, the ion generator inside the Portart-30 ESE terminal begins to release positive ions in to the atmosphere which attracts the lightning emissions on to the ESE rod.  Portart-30 ESE rod is a unique product in a sense that it's measured T is 57us which is also making it suitable for the requirements for an ESE rod with a T:45 us proving a wide coverage. Standard product does not come with an adaptor. The adaptor rod has 30 mm diameter with a 25 mm internal diameter but we are able to manufacture rod adaptors to the customers requirement. Our product is certified from Middle Eastern Technical University in NFC 17.102 Annex C. You are able to find all the dimensional information regarding Protart-30 ESE inside the relevant NFC 17.102 test report.

Portart-60 ESE Lightning Conductor is manufactured from high quality stainless steel which makes it durable against the toughest weather conditions.
When there is change in the electro magnetic field in the atmosphere, the ion generator inside the Portart-60 ESE terminal begins to release positive ions in to the atmosphere which attracts the lightning emissions on to the ESE rod. Standard product does not come with an adaptor. The adaptor rod has 30 mm diameter with a 25 mm internal diameter but we are able to manufacture rod adaptors to the customers requirement. Our product is certified from Middle Eastern Technical University in NFC 17.102 Annex C. You are able to find all the dimensional information regarding PROTART-60 ESE inside the relevant NFC 17.102 Test report.