Our Products
REMI Cooling Incubators are designed for applications in pharmaceutical, microbiology, biotechnology, chemical & research labs. These chambers are used for BOD test culture of bacteria, microorganism, tissue culture, incubation, immunological work & storage of vaccines etc.
These incubators are available in standard & GMP versions
SALIENT FEATURESTechnical Specifications
CI-6 Plus | CI-10 Plus | CI-12 Plus | CI-16 Plus | CI-19 Plus | CI-28 Plus | CI-35 Plus | |
---|---|---|---|---|---|---|---|
Internal Volume (Litres) | 200 | 280 | 370 | 450 | 540 | 800 | 1000 |
Number of tray | 2 | 3 | 4 | 5 | 6 | 6 | 7 |
Internal Dimensions W x D x H (mm) | 660 x 655 x 450 | 660 x 655 x 650 | 660 x 655 x 850 | 660 x 655 x 1050 | 660 x 655 x 1250 | 800 x 800 x 1250 | 800 x 800 x 1580 |
External Dimensions W x D x H (mm) | 800 x 1095 x 1020 | 800 x 1095 x 1220 | 800 x 1095 x 1420 | 800 x 1095 x 1620 | 800 x 1095 x 1820 | 960 x 1370 x 1950 | 960 x 1370 x 270 |
Temperature Range & Accuracy | 0°C to 60°C, ± 0.1°C | ||||||
Temperature control | Microprocessor with PT-100 sensor | ||||||
Display | 1″ – 7 Segment, Big Size LED | ||||||
Power Failure Alarm | Visual Alarm | ||||||
Door Open Alarm | Audio Visual Alarm in case door open for over one minute | ||||||
Temperature Variation Alarm | Set Temperature ± 2°C, Audio Visual Alarm | ||||||
Illumination | 8 Watts Fluorescent Tube | ||||||
Internal Body Material | Stainless Steel – 304 grade (Standard Models), Stainless Steel – 316 grade (GMP Models) | ||||||
External Body Material | Powder Coated CRCA Steel (Standard Models), Stainless Steel – 304 grade (GMP Models) | ||||||
Insulation | 70 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam | ||||||
Noise Level | Less Than 65 db(A) | ||||||
Recommended Voltage Stabilizer | VS-02 | VS-02 | VS-02 | VS-03 | VS-03 | VS-06 | VS-06 |
Remi Bench Top Orbital Shaking Incubator Model CIS 18 Plus finds application in researches on bacteria, cultivation, fermentation, hybridization, chemical and biochemical reaction, enzymes and tissues research, which have a high requirement on precision of shaking speed and temperature.
Construction: Its shell is made of engineering plastics through molding with a mechanical oscillating tray driven by a motor fitted at the bottom. The Oscillating locus is circular. The duct plate behind the working chamber is SS thin plate and all the operating keys on the LCD screen are on the front side. Box door Is of a big flap structure made of transparent plastics to facilitate observation, removal or placement of cultures. Closed-loop control of temperature and speed is effected with microcomputer electronic controller using PID regulation mode with LCD screen display. Hot and cold air stream is circulated through a blower behind the duct plate in the working chamber, thereby improving the uniformity of temperature in the working chamber.
Safety Multiple start of compressor in a short time is prevented and the controller performs the function of prolonged start before compressor is started.
When the measured temperature is in excess of the set temperature by 3C, the buzzer will give an over-temperature alarm and simultaneously the heater will shut down. When the box door opens, the door switch will cut off the power to stop the Heater, blower and rotating fan from work and the operator can remove or place the cultures safely.
SALIENT FEATURES:Technical Data |
Compact Laboratory Centrifuges
R-4C Compact model is designed for routine work in medical and industrial laboratories has digital speed indicator and 0-60 minute digital countdown timer.R-4C DX has additional features of dynamic brake for quick deceleration & imbalance detector with cutoff in case of uneven loads.
SALIENT FEATURES: R-4C / R-4C DX | ||
Max Speed | rpm | 4400 |
Max. RCF | g | 2350 |
Max. Capacity | ml | 200 |
W x D x H | mm | 330 x 370 x 295 |
Supply: 220-240 Volts 50 Hz. Single Phase |
R-8K Centrifuge incorporates stepless Speed Regulator, digital Timer and speed meter. It is specifically designed to suit the following special applications.
Technical Specifications | ||
Max. Speed | rpm | 4200 |
Max. RCF | g | 3150 |
W x D x H | mm | 400 x 420 x 315 |
Supply: 220-240 Volts. 50 Hz. Single Phase. |
The REMI Walk-in Growth Chambers are designed for precise monitoring of temperature, humidity and illumination conditions required for assistance of Seeds & plant growth.These chambers are available in standard or can be tailor made to suit specific requirements.
Advantages
Accessories
Features | Customer benefits | Characteristics |
Positive Air flow technology | Uniform test conditions throughout the chamber, Independent of sample size and quantity. |
Constant circulation of air throughout the chamber achieves homogeneous Temperature & Humidity conditions. |
Humidifier system | Humidity maintained by steam injection from Humidifier Tank. Reservoir Tank for storage of additional water. |
Vaporized humidification & capacitive humidity sensors provide early recovery after door opening due to better response time. |
Humidity sensor | Direct display of Humidity. Low drift fast response time, high accuracy |
High technology world leading sensors German make with output 4-20MA |
Illumination system | Fluorescent tubes provide light for growth assistance. 0 to 24 hours programmable cyclic illumination. |
Branded tube lights for long term reliable solution. Branded cyclic timer for long termreliable solution. |
Cooling system | Eco friendly CFC free refrigeration system provides reliable conditions. Condenser located outside helps to emit hot air beyond working area. |
Powerful Hermetically sealed Emerson compressor coupled with evaporator & condenser delivers the performance. CFC refrigerant reduce carbon footprint. |
Safety Features | Audio-Visual alarm for temperature & humidity variations along with utility failures. Low water level alarm & power cut off of boiler heater. Every alarm on machine can be extended by wired connection to security gate. Biometrics Door Access system for authorized entry along with door log. Safety switch in chamber for emergency bell located outside. Accidentally if a person is locked inside then also the door can be opened. |
Float switch cuts off supply to heater in case of low water level in humidifier tank. Biometrics Door Access system. Electrical Circuit Breaker. Shut off of Humidity & Air heaters in case of temperature over shoots or under shoots. Compressor 'ON' delay timer to safe guard the compressor. Overload cut off relay for compressor. |
Stand-by Cooling system & Humidity system | Dual Refrigeration & Humidifier provides extra uninterrupted functioning of the machine with automatic switch over in case of failure of primary systems |
Complete operative secondary system with recording of every switch over, & can be programmed to time bound switch over alternately providing rest for both the compressors |
PLC with color HMI | Intelligent controller with easy one glance display of all utilities & Multi sensor values. Felicitates auto switch over to secondary, Refrigeration & Humidity systems. Excellent graphics & convenient operation by color HMI (Human Machine Interface). |
Programmable controller provides versatility of prescheduled changeovers. Password protection for multiple functions. Easy preloading possible of User Manual & basic trouble shooting instructions. Excellent visuals on color HMI. |
Accessories and Services | Complete solution everything from one source All over India Service Centers |
PLC with color HMI. Data Logger with multiple sensors. Software for data acquisition. Biometric Door Access. GSM mobile SMS alerts for variations. |
The REMI Cooling Incubators are designed for incubation applications by precise control of temperature in microbiology, biotechnology, pharmaceutical, chemical & research labs. These chambers good for culture of bacteria, microorganism, tissue culture, incubation & are manufactured as per GMP norms. These chambers meet all critical requirements.
Advantages
Accessories
Features | Customer benefits | Characteristics |
Double walled chamber | High Energy Efficiency Stored samples can be viewed without opening the inner door, this saves on temperature loss & cost to recover it Minimal operating costs |
High energy efficiency due to 70 mm insulation Inner plexi glass door Sealed Double doors |
Positive Air flow technology | Uniform test conditions throughout the chamber, Independent of sample size and quantity. |
Constant circulation of air throughout the chamber achieves homogeneous Temperature. |
Cooling system | Eco friendly CFC free refrigeration system provides reliable conditions as per GMP/GLP norms. Safe incubation conditions at high ambient temperature Green initiative avoiding carbon emission |
Powerful Hermetically sealed Emerson compressor coupled with evaporator & condenser delivers the performance. CFC refrigerant reduce carbon footprint. |
Safety Features | Audio-Visual alarm for temperature variations and utility failures. Every alarm on machine can be extended up to security gate by wired connection. |
Electrical Circuit Breaker. Shut off of Air heaters in case of temperature over shoots or under shoots. Compressor 'ON' delay timer to safe guard the compressor. Overload cut off relay for compressor. |
Stand-by Cooling system (Optional) | Dual Refrigeration system provides extra uninterrupted functioning of the machine. | Complete operative secondary system which can be Auto / manual switch over in case primary system fails. |
Controller with LCD display | Intelligent controller with Auto tuning facility. Battery backup for controller. self-diagnosis for errors. Histogram format of 24 hours temperature recordings. Power failure & resumption recorded. Built in memory of 1000 records. Easy one glance display of utility. Felicitates auto switch over to secondary refrigeration system. 4 Inch attractive LCD display for excellent graphics & convenient viewing. |
Programmable controller provides versatility of auto switch overs. Password protection. Alarms & all electronic data recordings as per 21 CFR guidelines. Excellent visuals on LCD display. |
Software (Optional) |
As per 21 CFR Part 11 requirements. Secured SQL server database. Password aging. Secured Audit trail reports. Electronic signature. User defined MKT calculations. Alarm Log along with acknowledgement. Graphical Data display. Automatic & Manual backup. Single software for multiple machines. |
Remi “DATASOFT” software customized to maintain optimum electronic records with all the alarms & events. Rights based user categories. Software manual & validation protocol. Online & offline records. Data export in PDF format. Remote trouble shooting Support via team viewer. |
Qualification | Documentation as per FDA and GMP/ GLP regulations. Maximum process stability. Onsite validation & mapping. |
IQ, OQ, PQ, DQ documents. Traceability certificate of loggers. MOC certificates. |
Accessories and Services | Complete solution everything from one source. All over India Service Centers. |
PLC with color HMI. Data Logger with multiple sensors. Software as per 21 CFR Part 11. Biometric Door Access. GSM mobile SMS alerts for variations. |