Post Buy Requirement
RE
Mumbai, Maharashtra, India
Add Review

Other Products / Services #1149783

Blood Bag Stripper

RQS A is an automated tube stripper for smooth & effortless stripping of blood bag tubes. The proper mixing of blood present in the tube with the entire content of blood bag helps in anticoagulation of blood in the tubing, prior to preparing segments. This is an integral & important process during blood collection & quality component preparation.The ergonomically designed hand held automated tube stripper helps in improving compliance as manual tube stripping makes technicians prone to wrist injuries due to ergonomic causes. The automation also helps in standardization of the process & adherence to the SOPs. The battery backup for 1000 cycles in RQS-A makes it an ideal choice for blood donation camps.
View Complete Details

Blood Warmer

  • Weight approx. 1.300g
  • Mains Supply 100-240V, 50/60Hz
The Barkey s-line warms blood products and infusions up to the patients. The electrically heated and single-sided opening heating device is capable of accepting standard IV-sets. The Barkey s-line is simple to operate in all medical departments. It is extremely easy to clean due to its smooth surface. Its large and flexible application areas at low to medium flow rates result in an optimum alternative to cost-inensive blood heaters with single-use articles.
View Complete Details

Laboratory Hot Air Oven

REMI Dry hot air oven RDHO series are specially designed to achieve extreme dryness by evaporating all moisture contents from the biomass or other material. Microprocessor control helps in achieving precise high temperature with forced convection. Suitable for varied applications in laboratories and scientific research institutions.
View Complete Details

Tube Sealer

REMI Bench top sealer WeldOn-B is designed to meet high standards in blood safety. WeldOn-B helps to keep the blood bag system completely sterile. It ensures quality sealing with clear rupture line for easy tear-apart segments.
View Complete Details

Blood Bag Tube Sealer

REMI Bench top sealer WeldOn-B is designed to meet high standards in blood safety. WeldOn-B helps to keep the blood bag system completely sterile. It ensures quality sealing with clear rupture line for easy tear-apart segments.Consistent performance, safety features & monitoring system makes it ideally suited for easy & long lasting usage.
View Complete Details

Walk-in Chamber

  • Internal Dimension W x D x H (mm) 1250 x 2000 x 2000 , 2000 x 2000 x 2000, 2000 x 2000 x 2500, 2000 x 2500 x 2400
  • External Dimension W x D x H (mm) 1410 x 2950 x 2160 , 2160 x 2950 x 2160, 2160 x 3450 x 2560
  • Electrical 220-240 volts, 50Hz, Single Phase
REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI Datasoft software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.
View Complete Details

Seed Germinator

  • Temperature Range & Accuracy 10°C to 60°C, ± 1°C
  • Internal Dimensions W x D x H (mm) 660 x 655 x 450, 660 x 655 x 650, 660 x 655 x 850
  • External Dimensions W x D x H (mm) 800 x 1095 x 1020, 800 x 1095 x 1220, 800 x 1095 x 1420
REMI Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and Humidity.
View Complete Details

Blood Collection Monitor

REMI BCM-10 Ultra, A new generation portable blood mixer, ideally suited for blood collections in donation room as well as outdoor camps. Inbuilt key features along with microprocessor based controls ensure smooth & gentle mixing process, volume accuracy, precise monitoring of time & flow rate.The user friendly features of BCM 10 Ultra help phlebotomist to have complete control on donation process, thus ensuring donor safety & comfort.
View Complete Details

Cold Storage Chambers

Cold Room and Cold Storage are designed for precise monitoring of temperature conditions required for cold storage of Bio samples at various organizations like Biotechnology, Foods, Pharmaceutical, Agrochemical manufacturing facilities. These are made by erecting PUF panels and manufactured as per GMP norms, provided with refrigeration system, including optional standby refrigeration system for uninterrupted functioning.
View Complete Details

Walk-in

The REMI Walk-in Stability Chambers are designed for precise simulating, monitoring & control of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at pharmaceutical, chemical, agrochemical manufacturing facilities. These chambers are manufactured as per GMP norms. They are available in standard or can be tailor made to suit specific requirements.From maintaining of set parameters to documentation, these chambers meet all critical requirements.
View Complete Details

Walkin Cold Room

The REMI Walk in Cold Room and Cold Storage are designed for precise monitoring of temperature conditions required for cold storage of Bio samples at various organizations like Biotechnology, Foods, Pharmaceutical, Agrochemical manufacturing facilities. These are made by erecting PUF panels and manufactured as per GMP norms, provided with refrigeration system, including optional standby refrigeration system for uninterrupted functioning.

Advantages

  • Maintains precise temperature for long term cold storage
  • Complete solution for simulation of desired uniform Temperature throughout the chamber
  • Eco friendly CFC free refrigeration system

Accessories

  • PLC Based Control System with 7" color HMI Touch Screen
  • Software as per 21 CFR Part 11
  • Data logger with 8 / 16 / 24 PT-100 Sensors
  • Standby Refrigeration System
  • Magnetic Door Access Security System
  • GSM Mobile Alert for six Numbers
  • Stainless steel racks and trays.
  • Validation [ mapping ] consist of one cycle for temperature and humidity at any one set point for 24 hours on empty and loaded condition of Walk-in Chambers

Features Customer benefits Characteristics
Positive Air flow technology Uniform test conditions throughout the chamber, Independent
of sample size and quantity.
Constant circulation of air throughout the chamber achieves homogeneous Temperature conditions.
Cooling system Eco friendly CFC free refrigeration system provides reliable conditions as per GMP/GLP norms. Powerful Hermetically sealed Emerson compressor coupled with evaporator & condenser delivers the performance.
CFC refrigerant reduce carbon footprint.
Safety Features Audio-Visual alarm for temperature variations along with utility failures.
Every alarm on machine can be extended up to security gate by wired connection.
Compressor 'ON' delay timer to safe guard the compressor.
Overload cut off relay for compressor.
Electrical Circuit Breaker.
Shuts off of Air heaters in case of temperature over shoots or under shoots.
Stand-by Cooling system Dual Refrigeration provides extra uninterrupted functioning of the machine with automatic / manual switch over in case
primary system fails.
Complete operative secondary system which can be Auto / manual switch over.
Controller with LCD display Intelligent controller with Auto tuning facility.
Battery backup for controller.
self-diagnosis for errors.
Histogram format of 24 hours.
Temperature recording provided.
Power failure & resumption recorded.
Built in memory of 1000 records.
Easy one glance display of utility.
Felicitates auto switch over to secondary refrigeration system.
4 Inch attractive LCD display for excellent graphics & convenient viewing.
Programmable controller provides versatility of auto switch overs.
Password protection.
Alarms & all electronic data recordings as per 21 CFR guidelines.
Easy preloading possible of User Manual & basic trouble shooting instructions.
Excellent visuals on LCD display.
Software As per 21 CFR Part 11 requirements.
Secured SQL server database. 
Password aging.
Secured Audit trail reports.
Electronic signature.
User defined MKT calculations. 
Alarm Log along with acknowledgement.
Graphical Data display.
Automatic & Manual backup.
Single software for multiple machines.
Remi “DATASOFT” software customized to maintain optimum electronic records with all the alarms & events.
Rights based user categories.
Software manual & validation protocol.
Online & offline records.  
Data export in PDF format.
Remote trouble shooting Support via team viewer.
 
Qualification Documentation as per FDA and GMP/ GLP regulations.
Maximum process stability.
Onsite validation & mapping.
IQ, OQ, PQ, DQ documents. 
Traceability certificate of loggers.
MOC certificates.
Accessories and Services Complete solution everything from one source.
All over India Service Centers.
PLC with color HMI.
Data Logger with multiple sensors.
Software as per 21 CFR Part 11.
Biometric Door Access.
GSM mobile SMS alerts for variations.












































View Complete Details

High Speed Stirrer

  • capacity 40 liters & 20 liters
  • Weight [kg] 2.4
  • Dimensions [W x H x D] (mm) 83 x 220 x 186
  • Stirring Shaft x length (mm) 14 x 220
REMI presents the next generation of laboratory stirrers for stirring mixing etc. of chemical, pharmaceutical, food and cosmetic products. The equipment basically consists of body, chuck, stainless steel blade propeller and a U-type stand.
View Complete Details

Cast Steel Chamber

The REMI Stability Chambers are designed for precise simulating, monitoring, and control of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at pharmaceutical, chemical, agrochemical manufacturing facilities. These chambers are manufactured as per GMP norms. Apart from maintaining of set parameters, these chambers meet all critical requirements.
View Complete Details

Test Chambers

The REMI Stability Chambers are designed for precise simulating, monitoring, and control of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at pharmaceutical, chemical, agrochemical manufacturing facilities. These chambers are manufactured as per GMP norms. Apart from maintaining of set parameters, these chambers meet all critical requirements.
View Complete Details

Cold Cabinets

The REMI Cold Cabinets are designed for storage of bio samples by precise control of temperature. These chambers are good for long term storage & manufactured as per GMP norms. These chambers meet all critical requirements in the industry.

Advantages

  • Maintains precise set temperatures.
  • Safe for long term storage.
  • Complete solution for simulation of desired Temperature in the chamber

Features Customer benefits Characteristics
Double walled chamber High Energy Efficiency
See through double doors with vertical view window on outer door & samples can be viewed without door opening
this saves on temperature loss & cost to recover it
Minimal operating costs
High energy efficiency due to 70 mm insulation
Inner plexi glass door & outer door having full size view window.
Sealed Double doors
 
 
Positive Air flow technology Uniform test conditions through out the chamber, Independent
of sample size and quantity.
Constant circulation of air throughout the chamber achieves homogeneous Temperature.
Cooling system Eco friendly CFC free refrigeration system provides reliable conditions as per GMP/GLP norms.
Safe long term storage at high ambient temperature
Green initiative avoiding carbon emission
Powerful Hermetically sealed Emerson compressor coupled with evaporator & condenser delivers the performance.
CFC refrigerant reduce carbon footprint.
Safety Features Audio-Visual alarm for temperature variations and utility failures.
Every alarm on machine can be extended up to security gate by wired connection.
Electrical Circuit Breaker.
Compressor 'ON' delay timer to safe guard the compressor.
Overload cut off relay for compressor.
Stand-by Cooling system (Optional) Dual Refrigeration system provides extra uninterrupted functioning of the machine. Complete operative secondary system which can be Auto / manual switch over in case primary system fails.
Controller with LCD display Intelligent controller with Auto tuning facility.
Battery backup for controller.
self-diagnosis for errors.
Histogram format of 24 hours temperature recordings.
Power failure & resumption recorded.
Built in memory of 1000 records.
Easy one glance display of utility.
Felicitates auto switch over to secondary refrigeration system.
4 Inch attractive LCD display for excellent graphics & convenient viewing.
Programmable controller provides versatility of auto switch overs.
Password protection.
Alarms & all electronic data recordings as per 21 CFR guidelines.
Excellent visuals on LCD display.
Software
(Optional)
As per 21 CFR Part 11 requirements.
Secured SQL server database.
Password aging.
Secured Audit trail reports.
Electronic signature.
User defined MKT calculations.
Alarm Log along with acknowledgement.
Graphical Data display.
Automatic & Manual backup.
Single software for multiple machines.
Remi “DATASOFT” software customized to maintain optimum electronic records with all the alarms & events.
Rights based user categories.
Software manual & validation protocol.
Online & offline records.
Data export in PDF format.
Remote trouble shooting Support via team viewer.
 
Qualification Documentation as per FDA and GMP/ GLP regulations.
Maximum process stability.
Onsite validation & mapping.
IQ, OQ, PQ, DQ documents.
Traceability certificate of loggers.
MOC certificates.
Accessories and Services Complete solution everything from one source.
All over India Service Centers.
PLC with color HMI.
Data Logger with multiple sensors.
Software as per 21 CFR Part 11. Biometric Door Access.
GSM mobile SMS alerts for variations.

















































View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Aditya (Remi Elektrotechnik Ltd)
  • REMI HOUSE, 3RD FLOOR, 11, CAMA INDUSTRIAL ESTATE, WALBHAT ROAD, Goregaon East, Mumbai, Maharashtra - 400063
  • Share us via