Pune, Maharashtra, India
Our Products
The Disc MCW is a ceiling mount PIR detector that combines state-of-the-art optic design with advanced detection algorithms. It provides outstanding 360 detection performance, minimum false alarms and supreme reliability.
The Disc MCW detector's miniature size is easily installed on any ceiling up to 3.6m (12ft) high and provides floor coverage of up to 11m (36ft). It is ideal for monitoring large residential rooms, light commercial facilities and rooms in which the layout or furniture might block a wall-mounted detector's line of sight.Battery operated. Battery operated with average battery life of over 1 year
Visonic Miniature Wireless Ceiling Mount Motion Detector Disc MCWThe Disc MCW is a ceiling mount PIR detector that combines state-of-the-art optic design with advanced detection algorithms. It provides outstanding 360 detection performance, minimum false alarms and supreme reliability.
The Disc MCW detectors miniature size is easily installed on any ceiling up to 3.6m (12ft) high and provides floor coverage of up to 11m (36ft). It is ideal for monitoring large residential rooms, light commercial facilities and rooms in which the layout or furniture might block a wall-mounted detectors line of sight.
Disc MCW Features:
Available only in 433.9 MHz.
Visonic internal GSM module supports normal GSM SIM card. You can receive calls and SMS for all the alerts and alarms on up to 8 different number. Send simple SMS commands to the panel to Arm, Disarm and to know the current status of the panel. Fits inside the control panel therefore no chance of cutting of wires to disable it.
Visonic Internal GSM ModuleSupports three data channels GPRS*, GSM and SMS for high-speed and highly-reliable reporting.Can be configured as a backup or primary reporting method.Full event reporting.Recommended for every home as a backup communication line in case of line failure or system sabotage.Supports remote programming of the security system via the IPMP Management Platform or via dial-up over the GSM data channel.Continuous monitoring of channel integrity and signal loss detection.Supports SIA/IP, SIA and Contact ID monitoring protocols.Support two-way voice communication.Optional external antenna is available to enhance the GSM signal reception.Works with PowerMaxPro, PowerMaxComplete and PowerMaxExpress GPRS-enabled control panels.
GSM 350/4 (900/1800MHz)
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Visonic Advanced IP Communicator Internet-based Home Control Solution for PowerMaxPro, PowerMaxComplete and PowerMaxExpress. Fits inside the control panel. Email notifications in case of alerts and alarms. When used with a WiFi camera, it sends the still images as well.
Visonic IP Communicator Module PowerLink 2 KITAdvanced IP Communicator Internet-based Home Control Solution for PowerMaxPro, PowerMaxComplete and PowerMaxExpress.Image Alarm Verification the Right Way. As PowerLink2 is fully integrated with the PowerMax home security system, it has the ability to send alarm time images based on real motion detection, which significantly reduces the cost to service providers and hassle to homeowners of false alarmsProvides IP-based event notifications to alarm central stations via Visonics IPMP (IP Management Platform).No router configuration required when used for IP-based event notification purposes.Built-in secure end-user web portal accessible from all standard PC and mobile phone browsers.Built-in mobile interface designed for touch screen mobile devices.Full control over the PowerMax home security system, including arm/disarm and status view of the system devices, and control of X-10 compliant home appliances.Provides live and alarm time recorded video feeds from up to 12 cameras, with the ability to save an image for evidence.Does not require any client software installation.Does not require a fixed IP at the home premises.End user event reporting via on-screen alerts, e-mail and mobile messages.Enables end users to access the PowerMax event log.Offered as an internal module for PowerMaxPro, PowerMaxExpress and PowerMaxComplete.Fully managed by Visonics IPMP management platform.Remote maintenance and configuration of the PowerMax security system via the IPMP.
Visonic Wireless Outdoor Siren with Strobe. It is an excellent visual deterrent for the burglars. 100db siren with flashing lights. Battery life of more than 3 years. Low battery and panic alarm transmission to the control panel.
Visonic Fully Wireless Outdoor Siren MCS-740Wireless connection between control panel and siren Battery operation with no additional power supply required(battery life up to 3 years)Double plastic cover for extra protection against harsh external conditions (IP55)Convenient and rapid no-mess installationAudible and visual arming and disarming notificationsFully-supervised two-way communication for local and remote diagnosticsStatus, tamper, low battery and supervision reports to the control panelTriple tamper protectionSelf-test feature that allows users to check the siren and strobe lights prior to installation100 dB Piezo siren and high-power strobe light
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together.
Visonic Wireless Smoke Detector MCT-426 with in-built 85db siren. Absolutely no false alarms. Battery life of up to 5 years. Low battery and temper alarm transmission to the control panel.
Visonic Wireless Smoke Detector MCT-426
Visonic Wireless Smoke Detector MCT-426 with the Visonic Wireless Burglar Alarm can be given as a solution for completely wireless addressable fire alarm system. In case fire is detected from any of the smoke detectors, it can send an SMS as well as call the predefined numbers with the exact location of the fire. In-built siren and flashing lights gives the visual indication of the location of fire. As no wiring is required, you can get a dependable solution for fire detection and also flexibility of increasing the number of smoke detectors at any point of time to scale the existing fire alarm system.
Visonic Wireless Smoke Detector MCT-426 features:Superior detection sensitivity.Sound and transmitted alerts (smoke, tamper, low battery). Fully supervised.PowerCode technology with anti-collision transmission algorithm.9 Volt alkaline battery.Simple ceiling-mount installation with no mess.Easy programming and user-friendly control.Attractive modern design suitable for residential applications.Compatible with PowerMax and other Visonic PowerCode wireless systems
Available only in 433.9 MHz.
Battery operated. Detects motion for up to 15 mtrs and 90 degree angle. Completely detects motion in a room which is 15 mtr by 15 mtr. Battery operated with average battery life of over 1 year
Visonic Pet Immune Wireless Motion Detector Next K9-85 MCWNext+ K9-85 MCW is a PowerCode wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house.PIR has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).Next+ K9-85 MCW is a fully supervised wireless detector with anti-collision PowerCode technology.It is compatible with PowerMax and all Visonic PowerCode; wireless panels and receivers.It is also called True Motion Recognition.10-15m (40 ft) 90o multiple-curtain coverage with creep zone.3 Volt long life high power standard Lithium battery.Fast and easy adjustment-free installation.Attractive sleek design suitable for any home or office environment.Compatible with PowerMax and all Visonic PowerCodewireless panels and receivers
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Visonic Wireless Pet-Immune Motion Sensor Next+ K9-85 MCWBattery operated. Detects motion for up to 15 mtrs and 90 degree angle. Completely detects motion in a room which is 15 mtr by 15 mtr. Battery operated with average battery life of over 1 year
Visonic PowerMax Complete Wireless Burglar Alarm Kit VPMCKit28 Wireless Zones, which allows you to connect 28 Wireless detectorsBuilt-in PSTN(Telephone Line) communicator can be connected to existing fixed landline which can work as a backup to the GSMEasy-to-add internal GSM Module:Just put in GSM module & SIM card inside the system to call and send SMS to 4 + 4 pre-defined numbers to receive all the alerts and alarms. The GSM module is inside the system thereby preventing the burgalar to disable the dialing by cutting of wiresVoice functionality: two-way voice communication, voice prompts, family message centerAccess from remote telephones: You may access the Alarm System from a remote telephone by dialling to your land line number and Arm/Disarm it or receive system status information.Looking after elderly, physically handicapped and infirm individuals: The system can be programmed to monitor activity within the protected areaDisarming under duress: If a user is forcibly compelled to disarm the system (for example at gun point), he can use a special code that disarms the system apparently as usual, but a silent call to pre-defined telephone numbers.Battery supervision: You do not have to worry about dead batteries. The Alarm System displays a Low Battery message whenever a battery in a wireless sensor is found to be near the end of its useful life. When the battery voltage in the wireless siren is low, a low battery message is sent to the alarm system. After the low voltage message delivery, at least 2 siren alarms are possible before the siren is totally inactive.Battery life of mininum 1 year for each sensor under optimal conditionsLatch key function which calls the owner when the panel is disarmed by an authorized user. Informs the owner when the shop/office is opened or parents when their children comes homeCompletely wireless with only cable required for power to the main control unit and telephone line. Very easy installation for existing home and offices as it does not require any provision for wiringIn built 90 db siren in the panel itselfProvision to connect completely wireless outdoor siren with flashing lights which becomes a first visual deterent for the burglars. Under ideal conditions the battery life of the outdoor siren is 3 yearsEasy operation for arm and disarm. Can be used by elderly or children or serventMultiple arming modes:AWAY: When nobody is in the premisesHOME: When you are inside the premises. You can assign which sensors will be armed and which are disarmed in this case.AWAY-INSTANT: Arm the system without an entry delay when notbody is inside the premises.HOME-INSTANT: Arm the system without an entry delay when the premises is occupied.LATCHKEY: Get a notification when your children or staff disarms the system in your absence.BYPASS: Leave certain individual sensors disarmed and partially arm the system
Range of optional completely wireless indoor and outdoor sensors and emergency buttons like Pet Immune Wireless Motion Detector, Magnetic Contact , Outdoor detector, Flood Detector, Advanced Acoustic Glass Break Wireless Detector and Wireless Smoke DetectorTwo-way RF system with diversity antenna facilitates highly reliable radio communicationPartition-ready controls up to 4 partitionsEasy-view LCD display and icon-based keypadBack-up battery supplies multiple peripherals and also backs up internal GSM/GPRS/IP modulesFull compliance with most international standards and regulations, including: FCC, CE and EN50131 grade 2
Kit Content1 PowerMax Complete Panel1 Wireless Keyfob (MCT-234)1 Wireless Door Contact (MCT-302)1 Pet Immune Wireless Motion Detector(K9-85))
Operates like a car remote to Arm Away/Home Arm/Disarm/Panic. Battery life of more than 1 year. Low battery and panic alarm transmission to the control panel.
Visonic Wireless 4 Button Remote Keyfob MCT 234Four independent functional buttons.Comfortable miniature attractive design.Superior transmission range.CodeSecure encryption technology prevents unauthorized code grabbing.CodeSecure ID factory-selected from over 100 million possible code combinations.Standard Alkaline battery.Visible and transmitted low battery indication.Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers.
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Great solution to protect doors, windows or large openings from intruders. Creates a curtain at the same time allows you to use the room without triggering an alarm. Battery life of more than 1 year. Low battery and panic alarm transmission to the control panel.
Visonic Wireless Curtain Motion Detector Clip MCWClip MCW is designed for the protection of doors, windows and all-glass walls.Compatibility with members of the PowerMax family and all Visonic PowerCode wireless panels and receivers.Fast and easy installation.Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm.Clip MCW uses algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the units specific application.Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.3-volt long-life high power standard lithium battery.Attractive, sleek design suitable for any home or office.Includes additional internal input for connecting any hardwired device such as an occupancy sensor.
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Ideal for protecting doors and windows. Battery life of more than 1 year. Low battery and temper signal transmission to the control panel.
Visonic Wireless Magnetic Contact MCT 302Magnetic contact and auxiliary input for external devices.User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors).Back tamper switch detects removal from place.Superior transmission range.Fully supervised.PowerCode ID factory-selected from 16 million possible combinations.Smart anti-collision mechanism supports multiple simultaneous transmissions.Long-life standard lithium battery included.Available in several optional frequencies in compliance with international standards.Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Visonic Wireless Burglar Alarm Kit PME (433) KIT
Visonic Wireless Outdoor Motion Detector TOWER-20AM MCW is battery operated. Absolutely no false alarms. Battery life of more than 1 year. Low battery and panic alarm transmission to the control panel.
Visonic Wireless Outdoor Motion Detector TOWER-20AM MCWSuperior outdoor detection with virtually no false alarms.It is the first detector to prevent false alarms caused by outdoor interference, such as rain, snow, lightning storms, swaying bushes and free-roaming animals, while still providing reliable detection of real threats.Adaptive, active IR provides complete anti-masking protection (patented).12m x 12m (40ft x 40ft) / 90o coverage with true creep zone down looking optics.Compatible with all types of PowerMax panels and MCR receivers.When connected to PowerMax, PowerMax+ or MCR-308 receiver, turn ON the switch in order to send masking alerts to the control panel.
Note: Installation Charges apply.Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Visonic completely wireless emergency push button with in-built flashing LED. Battery life of more than 5 years. Low battery and temper alarm transmission to the control panel.
Visonic Wireless Panic Emergency Button MCT-220MCT-220 is a wireless panic emergency button that provides an ideal solution for people who need to raise emergency alarm calls when they are not close to the control panel.The emergency button works with all Visonic PowerMax systems.MCT-220 has several design features that make it visible at all times.It has a large red button that when pressed, activates the red LED light for a few seconds. This makes it visible from most angles and reassures the user that the call has been activated.The button intermittently lights up, blinking every few seconds, so that it can be easily located at night.
When activated, it sends either an audible or silent panic alarm to the alarm panel. The panel then sends an SMS to 4 pre-defined numbers and also calls 4 pre-defined numbers. Response Alarms also provides the software which can be installed in a control room where the alarm is sounded. Email, email reports and SMSs can also be sent automatically to the concerned person from the central monitoring system. Very easy to install and maintain as it does not require any extra hardware. Central monitoring system also supports both IP over local network or Internet and GSM module which works over the normal SIM card.
In addition, the MCT-220 includes an optional humidity-resistant silicon pocket so that it can be installed in humid environments such as on shower walls, in factories, hospitals, gardens, and pools.Attractive and compact design.Low battery indication and alerts sent to the control unit. Five-year expected battery life (for one alarm per day).
Available only in 433.9 MHz.
Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:
| Video/Audio Input | ||
|---|---|---|
| IP video input: | | | 16-ch |
| Two-way audio input: | | | 1-ch, RCA (2.0 Vp-p, 1kΩ) |
| Network | ||
| Incoming bandwidth: | | | 100Mbps |
| Outgoing bandwidth: | | | 80Mbps |
| Remote connection: | | | 128 |
| Video/Audio Output | ||
| HDMI/VGA output: | | | 1-ch, resolution: 1920 × 1080P /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz |
| Recording Resolution: | | | 5MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Frame Rate: | | | Main stream: 50 fps (P) / 60 fps (N) Sub-stream: 50 fps (P) / 60 fps (N) |
| Audio Output: | | | 1-ch, RCA (Linear, 1kΩ) |
| Synchronous Playback: | | | 16-ch |
| Decoding | ||
| Live view / Playback: | | | 5MP/3MP/1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF /QCIF |
| Capability: | | | 16-ch@4CIF, 12-ch@720P, 6-ch@1080P |
| Hard Disk | ||
| SATA: | | | 2 SATA interfaces for 2 HDDs |
| Capacity: | | | Up to 4TB for each disk |
| External Interface | ||
| Network Interface: | | | 1RJ-45 10/100/1000Mbps self-adaptive Ethernet interface |
| USB Interface: | | | 1 × USB 2.0 and 1 × USB 3.0 |
| Alarm In: | | | 4-ch |
| Alarm Out: | | | 1-ch |
| General | ||
| Power Supply: | | | 12V DC |
| Consumption(without hard disk and POE): | | | ≤ 10W |
| Working Temperature: | | | -10 ºC ~ +55 ºC (+14 ºF~ + 131 ºF) |
| Working Humidity: | | | 10 % ~ 90 % |
| Chassis: | | | 380 chassis |
| Dimensions: | | | 380 × 290 × 48mm (15.0 ×11.4 × 1.9 inch) |
| Weight(without HDD): | | | ≤ 1 kg |
The Yale Digital Door Locks Collection!Smarter Solution for your home. High-tech Fingerprint Digital Door Lock with strong Security features.
Features & Benefits:
Technical details:
Hikvision 16 Channel HDTVI DVR DS-7216HQHI-F1
| Video/Audio Input | ||
|---|---|---|
| Video Compression: | | | H.264 |
| Analog and HD-TVI video input: | | | 16-ch,BNC interface (1.0Vp-p, 75 Ω) |
| Supported camera types: | | | 720P25, 720P30, 720P50, 720P60, 1080P25, 1080P30, CVBS |
| IP Video Input: | | | 2-ch 1080P |
| Video Input Interface: | | | BNC (1.0 Vp-p, 75Ω) |
| Audio Compression: | | | G.711u |
| Two-way Audio: | | | 1-ch RCA(2.0Vp-p, 1kΩ) |
| Video/Audio Output | ||
| HDMI/VGA Output: | | | 1920 × 1080 / 60 Hz,1280 × 1024 / 60 Hz, 1280 × 720 / 60 Hz, 1024 × 768 / 60 Hz |
| Recording resolution: | | | Main stream: 1080P (non-real-time) / 720P / WD1/ VGA / 4CIF / CIF;Sub-stream: WD1(non-real-time) / 4CIF(non-real-time) / CIF / QCIF / QVGA |
| Frame Rate: | | | Main stream: 1/16 fps ~ Real time frame rate Sub-stream: 1/16 fps ~ Real time frame rate |
| Video Bit Rate: | | | 32 Kbps-6 Mbps |
| Audio Output: | | | 1-ch RCA(2.0 Vp-p, 1kΩ) |
| Audio Bit Rate: | | | 64kbps |
| Dual Stream: | | | Support |
| Playback Resolution: | | | 1080P / 720P / VGA / WD1 / 4CIF / CIF / QVGA / QCIF |
| Synchronous Playback: | | | 16-ch |
| Network management | ||
| Remote connections: | | | 128 |
| Network protocols: | | | TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS |
| Hard Disk Driver | ||
| Interface Type: | | | 2 SATA Interface |
| Capacity: | | | Up to 4TB capacity for each disk |
| External Interface | ||
| Network Interface: | | | 1; 10M / 100M self-adaptive Ethernet interface |
| USB Interface: | | | 2 USB 2.0 Interfaces |
| Serial Interface: | | | 1; standard RS-485 serial interface, half-duplex |
| General | ||
| Power Supply: | | | 12V DC |
| Consumption: | | | ≤ 20W |
| Working Temperature: | | | -10 ºC ~+55 ºC (14 ºF ~ 131 ºF) |
| Working Humidity: | | | 10% ~ 90% |
| Chassis: | | | 380 mm 1U chassis |
| Dimensions: | | | 380 × 290 × 48mm (15 × 11.4 × 1.9 inch) |
| Weight: | | | ≤ 2Kg (4.4lb) |
Hikvision 3.6mm 2Mp HDTVI Dome camera IR 20m DS-2CE56D0T-IRPF
Hikvision 3.6mm 2Mp HDTVI Dome camera IR 20m DS-2CE56D0T-IRPF
Hikvision 4mm 1.3MP Bullet camera IR 30m DS-2CD2010F-I
Hikvision 4mm 1.3MP Bullet camera IR 30m DS-2CD2010F-I
Optex Wireless Outdoor Motion Detector BX-80NR and Visonic MCT-301
With long, narrow detection areas that extend from both its sides, the battery-powered BX-80NR is specifically designed to be wirelessly wall-mounted centrally on a building. This unique detection pattern covers the building perimeter with a multi-layered, horizontal barrier that detects intruders before they break in. Included on the unit is a backbox that accepts most manufacturers wireless systems, making the BX-80NR a versatile, stable outdoor PIR requiring no running wire. To help reduce false activations, the range can be adjusted so that detection extends only to the end of the building. The unit also has a size-judging function, which helps it discriminate between large and small objects within the detection area.
| Model | BX-80NR | |
| Coverage | 24m (12m on each side) | |
| Detection zones | 4 zones (2 zones on each side) | |
| Sensitivity | 2.0°C at 0.6m/sec. | |
| Detectable speed | 0.3m – 1.5m/s | |
| Power supply | 3 – 9VDC lithium or alkaline Battery | |
| Current consumption | 3mA(Walktest, LED on) 15µA(Standby) |
|
| Alarm period | 2 ± 1 sec. | |
| Alarm output | Form C-Solid state switch: 10V DC 0.01A | |
| Battery saving time | Approx. 120 sec. or 5 sec. | |
| Tamper switch | Form C activates when cover is removed | |
| Warm-up period | Approx. 2 min. | |
| LED indicator | Disable during normal operation | |
| Enable during walktest or LED switch on | ||
| Operating temperature | -20°C to +50°C | |
| Environmental humidity | 95% max. | |
| RF interference | No Alarm 20V/m | |
| Mounting height | 0.8m – 1.2m | |
| Mounting | Wall | |
| Weight | 520g | |
| Dimensions (H x W x D) | 235mm x 56mm x 128mm | |
| Weatherproof | IP55 | |
| Main Monitor | LCD | 5.2″ Colour LCD (IPS technology) |
| Picture Recording | Max. 50 events / 400 images (8-shot continuous recording) | |
| Voice Changer | Yes | |
| E-lock Connection | 2 | |
| PBX Connection | Only Panasonic PBX | |
| Dimensions (WxDxH) mm | 165 x 38 x 190 | |
| Weight (g) | 735 | |
| Wireless Monitor | Wireless Monitor Connection | 1 included (Expandable to another 3) |
| Wireless Monitor LCD | 1.8″ Colour LCD | |
| Dimensions (WxDHD) mm | 52 x 35 x 157 | |
| Weight (g) | 175 (including battery pack) | |
| Door Station | Door Station Connection | 1 included (Expandable to another 1) |
| Camera Angle | Horizontal 87Ëš Vertical 66Ëš | |
| Dimensions (WxDxH) mm | 99 x 36.5 x 131 | |
| Weight (g) | 200 | |
| Optional Accessories for VL-SW250BX | VL-V566BX | Optional Door Station (same as one included in VL-SW250BX) |
| VL-W605BX | Optional Wireless Monitor (same as one included in VL-SW250BX) | |
| VL-V590BX | Optional Lobby type Door Station up to 20 rooms | |
| VL-GC005BX-S | Optional Door Station (metallic one) | |
| Relative Product | VL-MW250BX | Main Monitor (same as one included in VL-SW250BX) |
Ubiquiti UniFi AP Enterprise WiFi System Long Range. 2.4 GHz with up to 600 feet range and up to 300 mbps speeds
Ubiquiti UniFi AP Enterprise WiFi System Long Range
