Our Products
For handling bulk material belt conveyor has a vital application because of its capability of handling higher tornage over long distance at lower cost than any other type of conveyor. They are used extensively for small and big capacity as they are able to handle wide variety of materials economically.
Advance belt conveyors are performing numerous other functions in addition to transporting bulk materials, such as weighing, blending, sampling and stockpiling.
Since the materials are carried on the belt, it is suitable for handling certain corrosive materials also. The range of sizes may be handled on the belt conveyors is limited only by the width of the belt.
We are presenting a unique range of Fully-Automatic Concrete Block Making Plants at very competitive prices. We are offering superior quality of these plants. These are manufactured by us using finest grade of raw material and advanced technology. Our products are in demand dut to their well performance, pocket friendly price, lifelong service and easy installation. We also provide it as per clients requirements. We offer various Concrete Block Making Plants. These plants are such as:
1. RBM-10 ( 06 Bricks or 04 Pavers/Stroke with Frog ( Name in Bricks).
2. RBM-11 ( 08 Bricks or 06 Pavers/Stroke with Frog ( Name in Bricks ).
2. RBM-12 ( 10 Bricks or 08 Pavers /Stroke with Frog ( Name in Bricks).
3. RBM-15 ( 15 Bricks or 12 Pavers/Stroke with Frog ( Name in Bricks).
4. RBM-18 ( 18 Bricks or 12 Pavers/Stroke with Frog ( Name in Bricks).
4. RBM-25 ( 21 Bricks or 15 Pavers/Stroke with Frog ( Name in Bricks).
5. RBM-30 ( 24 Bricks or 18 Pavers/Stroke with Frog (Name in Bricks).
6. RBM-35 ( 27 Bricks or 18 Pavers/Stroke with Frog ( Name in Bricks)
7. RT10-15(RBM-40) [ 32 Bricks or 24 Pavers/Stroke with Frog (Name in Bricks).
Advantages
Technical Data
Weight |
Length |
Height |
Width |
Powered by |
Vacuum Pump Capacity |
165 kg |
1230 mm |
800 mm |
700 mm |
7.5 HP Electric Motor |
1850 Ltrs/min. at 70% vacuum |
Double Beam Screed Vibrator
Weight |
Length |
Height |
Width |
Powered by |
125 kg |
4.2 mm |
150 mm |
375 mm |
2 HP Electric Motor |
Power Floater cum Power Trowe
Weight |
Length |
Height |
RPM |
Working Diameter |
Powered by |
75 kg |
2500 mm |
810 mm |
110 |
720 mm |
3 HP Electric Motor |
Along with other material handling equipment, we provide our clients with Screw Conveyors of optimum quality standards. Designed and manufactured to ensure durability and efficient performance to the end user, our screw conveyors are reckoned for low maintenance cost. These equipment are manufactured using mild steel plates, and are useful in the efficient functioning of the oil mill plants. Offered in various sizes, capacities and specifications, these screw conveyors find extensive usage in the feeding of seeds and cakes. Some of the other details are as follows:
the vibrating table is used for compacting concrete cubes/concrete tiles/concrete blocks/interlocking pavers etc.
specifications: it is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The variable pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A starter is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, a.c.supply.the reva make vibrating table is suitable for the designer concrete tiles and pavers of good finishing and high tensile strength.
BAR-BENDING AND CUTTING MACHINE
REVA ENGINEERING ENTERPRISES is one of the leading Manufacturer, Exporter and Supplier of CONSTRUCTION EQUIPMENTS in Gaziabad Uttar Pradesh India.
REVA Bar Shearing (Cutting) Machine hydraulically operated with 5 H.P. Electric Motor for cutting Rod upto 45mm. dia having cutting blades made from special steel and having multiple cutting edges on each blade, with starter and pedal switch operation.
REVA Bar Shearing (Cutting) Machine upto 32mm. dia. cutting, Electric operated, Oil Bathed Gear Box, Powered by 5 H.P. Electric Motor.
REVA Bar Bending Machine electrically operated, having oil bathed gears, for bending Rods upto 40mm. dia complete with accessories, fitted with 7.5 H.P. Electric Brake Motor, Model No.BEL-40, complete as per our leaflet.
REVA COMBI Model , Bar Bending & Cutting Machine having oil bathed gear, for cutting up to 32mm and bending Rods upto 40mm, complete with accessories for making different angle stirrups fitted with7.5 H.P. Electric Motor complete as per our leaflet.
Bar Shearing (Cutting) Machine upto TMT 40 mm. dia. cutting, mechanically operated with 3 KW Electric Motor.
Bar Shearing (Cutting) Machine upto TMT 50 mm. dia. cutting, mechanically operated with 4 KW Electric Motor.
Our company is dedicatedly involved in manufacturing, exporting and supplying superior quality of Tile Press Machines. These machines are manufactured using advance technology and finest grade of raw materials. Our products are in demand due to their easy operation and high productivity with lower cost. We offer 2 models with us for Tile Press Machines that are RTM model and RTM2 model. Special Features: Model RTP1
We are the manufacturer of Coal & Ash handling plants and its spare parts. Giving out best bulk conveying solutions to our clients with reliable and services. Our parts are cheaper and durable and have long sustaining life. Ash/Coal handling player in providing cost effective & customized ash handling solutions. Our mission is to continue innovating ash handling systems and products by addressing to the ever changing environmental standards and boiler technologies. Every typical requirement is a challenge as well as an opportunity.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Wooden
Delivery Time : 15-20 days