Our Products
Leading Manufacturer, Supplier & Retailer of Conductivity Type Level Switch, Conductivity Level Switch, Displacer Level Switch, Tilting Float Switches and Top Mounted Float Operated Level Switch.
| Conductivity Type Level Switch |
| Principle of Operation |
| The electronic circuit of a level control unit is connected to one electrode and to the wall of metal or steel container. Once the liquid in the container has reached the level of electrode, the control circuit between electrode and container wall is closed via the electrically conductive liquid there by activating the output relay. The control circuit is galvanically isolated from the mains by an isolating transformer and thus the use of an additional electrode is eliminated. |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Available in SS 304/ SS 316/ pp/ pvc/ hdpe/ pvdf/ ptfe etc |
| Top Mounted Displacer Type Level Switch With Or Without Guide Pipe |
| Principle of Operation |
| Operation is based on a buoyancy principle where by a spring is loaded with weighted displacers which are heavier than the liquid under control. Immersion of the displacer in the liquid results in a buoyancy force change, producing a spring load reduction which moves the spring there byactuating the magnetic switch which is kept inside the stem |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Available in SS 304/ SS 316/ pp/ pvdf/ hdpe etcAvailable with weatherproof or flameproof enclosure. |
| top mounted float operated suspended and tilting float switches |
| principle of operation |
| a pear shaped float weighted at its upper end is suspended inside a vessel on the end of a flexible cable. as the liquid level rises the lower end of the float is supported by the fluid, the float tilts andoperates a micro switch inside it (not a mercury switch) |
| material specification |
| customized suiting to the service (fluid) and temperature.available in ss 304/ ss 316/ pp/ pvdf |
| Principle of Operation | |
| When the level rises above the actuation point the float buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor orrelay to indicate the level rise or decrease. | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature. Available in SS 304/ SS 316/ pp/ pvc/ hdpe/ pvdf/ ptfe |
se.
Economical Top Mounted Float Operated Level Switch Used By Gen Set Manufacturers
| Principle of Operation | ||
| When the level rises above the actuation point the float buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor orrelay to indicate the level rise or decrease. | ||
| Side Mounted Level Switch Magnetic Repulsion Type |
| Principle of Operation |
| This system has a side mounted flange. Float is fabricated out of the material suiting the service or fluid in the vessel When the level rises above the actuation point The float buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor or relay to indicate the level rise or decrease. |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Available in SS 304/ SS 316/ pp/ pvc/ hdpe/ pvdf/ ptfe etcMaterial of the flange cs/ ss/ pp /pvc/ hdpe/ pvdf/ ptfeAvailable with flameproof and weatherproof enclosure |
| Side mounted float type level switch for low oil level measurement equivalent to sika german |
| Principle of Operation |
| This instrument has a side mounted screwed process connection of 3/4 BSP (m). Float is fabricated in accordance with the service or fluid. When the level rises above the actuation point. The float buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor or relay to indicate the level rise or decrease. |
| Material specification |
| Available in SS and Brass |
| External Cage Type Single Stem Or Multipoint Level Switch |
| Principle of Operation |
| This is a float operated or displacer operated top mounted level switch having a single float for low and high operation enclosed inside a cage having side- side connection to process tank. When the level rises above the actuation point thefloat buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor or relay to indicate the level rise or decrease. |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Available in SS 304/ SS 316/ pp/ pvc/ hdpe/ pvdf/ ptfe |
| br Approved Boiler Drum Level Switches With 2/3/4 Points Switching Action |
| This is the product which you are looking for!! These units are never tiring, snap action, fit and forget type level switches from the reputed quality product manufacturer who has a proven track record of quality. |
| Principle of Operation |
| This is a float operated level switch having a single float for low high level operations, enclosed inside a cage having side-side connections to process tank. When the level rises above the actuation point the float buoys up alongwith the level rise and actuatesthe magnetic switch which is kept inside the stem.The closure of the switch can operate a contactor or relay to indicate the level rise or decrease. |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Cage or body material CSAll wetted parts material SS304/ SS316 |
Ajit Nair (Revathi Electronics and Controls)
n-2/w-66b,chikhloli midc, Chinchpokli, Mumbai, Maharashtra - 421505
Share us via
Write a Review
