Our Products
Magnetic Switch
2 Products availablePressure Switches
2 Products availableValves & Valve Fittings
1 Products availableMeasurement Gauges & Fittings
1 Products availableSafety Switches
1 Products availableHigh Voltage Circuit Breaker
1 Products availableLaboratory Equipments
1 Products availableWe offer the best product range of Side Mounted Level Switch Magnetic Repulsion Type, External Cage Type Single Stem and Vane Flow Switch Paddle.
| External Cage Type Float Operated Magnetic Level Switch Side-Side Connection With Externally Adjustable Switches |
| Principle of Operation |
| This is a float operated level switch having a single float for high or low operation enclosed inside the cage having side-side connections to process tank. Here the float which carries the magnet moves up and down sensing the level increase or decrease inside the external chamber. These switches are externally fitted i.e. they are clamped outside the chamber pipe. These switches are latching type and they are either reed or micro type. Once the float moves up due to level rise while exceeding the actuation points the float magnet actuates theswitch i.e. (nc to no). It remains as no contact because of the latching arrangement inside the switch though the level continuesto rise to the maximum. When the level drops lower than the set point the contact changes though the level goes down even to itslowest position such as even to zero position. |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Available in SS 304/ SS 316/ pp/ pvc/ hdpe/ pvdf/ ptfe etc |
Additional Information:
Payment Terms : T/T
Packaging Details : NA
Delivery Time : 2
This is a level transmitter employing magnet embedded float. The magnet embedded floats bouys up alongwith the level rise and it cuts out a series of resistors kept sealed inside a stem. The output which is current signal of 4-20 mA is transmitted to remote area i.e. say pump room or control room. |
| Principle of Operation | |
| Self actuated level control float valve | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature, Available in SS 304/ SS 316/ pp/ CS etc |
| Principle of Operation | |
| Revathi-Helios Level Transmitters are having 2 systems i.e. The immersed body displacer and high grade instrument combination with electronic angle transmitter. The rotation of the extended pointer shafts picked up contactless by a capacitive bridge amplified and converted with an impressed standard signal.In combination with a intrinsically safe power pack the transmitter satisfies the explosion safety regulation may be employed in the rooms.where there is an explosion hazard. | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature, Available in SS 304/ SS 316/ pp/ CS etc |
| Side Mounted Magnetic Level Switch Linc Type |
| Principle of Operation |
| This system has a side mounted flange. Float is fabricated out of the material suiting the service or fluid in the vessel When the level rises above the actuation point The float buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor or relay to indicate the level rise or decrease. |
| Material specification |
| Customized suiting to the service (fluid) and temperature.Available in SS 304/ SS 316/ pp/ pvc/ hdpe/ pvdf/ ptfe etcMaterial of the flange cs/ ss/ pp /pvc/ hdpe/ pvdf/ ptfeAvailable with flameproof and weatherproof enclosure |
| A] Sight Flow Indicator | |
| Principle of Operation | |
| The different types are double window full viewplain, Flapper, drip tube, rotator type. | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature, Available in SS 304/ SS 316/ pp/ CS etc |
| Principle of Operation | |
| The pull cord switch is used as a rope operated safety tripping switch for conveyor belts, i.e. When the rope is pulled the lever of the pc unit is operated which in turn, actuates a switch, thereby the conveyor is stopped. The switch lever will be manual reset type. |
| The belt sway switch is used for sensing the swaying of the conveyor belts due to uneven loading, worn roller surface etc. the switch is to be mounted in near vicinity of the conveyor belt with a small clearance between contact roller and the belt edge to allow normally accepted swaying. When the swaying exceeds allowable limit, the belt edge would push the contact roller which in turn would actuate the switch. When swaying stops the switch would automatically reset under the action of resetting spring. Material specificationStandard assembly enclosed in aluminum housing | |
| Principle of Operation | |
| This consist of a motor assembly which rotates the shaft with a paddle housing. Liquid or solid touching the paddle offers resistance to the paddle thus stopping its rotation actuating a switch mechanism alarm or indication. | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature, Available in SS 304/ SS 316/ pp/ CS etc |
.
| Principle of Operation The liquid level is distinguished by the different brightness of the reflex glass is the media or in the stream/empty space. In fact where is liquid in contact with the glass, the incidental light is refracted to inside of the gauge and absorbed. Due to the above fact we get a black color indicating the level of liquid. But with the steam space above the liquid media appears very bright indicating the demarcation between liquid and empty space. Material specification
|
| Principle of Operation These tubular gauge glass valves represent years of experience in the manufacture of gauge valves and offer variety of types of connections to suit all requirements. All have forged bodies with stainless steel trim. All carbon steel parts are rust proofed inside and out. The highest quality borosilicate tubular glass is furnished as original equipment. | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature. |
| Principle of Operation | ||
| Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. | ||
| Material specification | ||
| Customized suiting to the service media and op. conditionsAvailable in SS 304/ SS 316/ PP/ PVC/HDPE/ PVDF/ PTFE etc. | ||
| B] Flow Switch Piston Type and Paddle Type | |
| Principle of Operation | |
| These flow switches operate on the principle of flow and they are piston operated. As the flow decreases i.e less than the set value the contact open vice versa to operate an alarm or indicator or to the device | |
| Material specification | |
| Customized suiting to the service (fluid) and temperature, Available in SS 304/ SS 316 |
Ajit Nair (Revathi Electronics and Controls)
n-2/w-66b,chikhloli midc, Chinchpokli, Mumbai, Maharashtra - 421505
Share us via
View Contact Number 
Write a Review
