A two component, low viscosity, solvent free injection grouting system designed to give superior bonding & high compressive strength for concrete, mortar, steel & wood. The other advantages include high toughness, no shrinkage, and superior compressive strength.

Polyethylene foam joint rod typically used in the for filling expansion joints prior to sealing. Poly backer rod can be used in many substrates, such as concrete, brick or block work and metals. The foam backing rod helps to prevent a joint from failing and significantly reduces the amount of sealant being used. Our backer rod does not rot and is chemically neutral.
Non absorbent compressible white closed cell polyethylene foam backup material.

Recommended For:

• Reducing the depth of joints in construction and glazing use.
• Creating a backstop to allow proper sealant tooling in expansion joints.
• Does not rot. Physically and chemically neutral.

BOSS® 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. BOSS® 333 has excellent insulating properties and superb adhesion to virtually all building materials

USES

• Air sealing
• Partition walls with ceilings
• Through penetrations around cables and pipes
• Seams between chimneys, roof protection, roof panels and wall panels

FEATURES

• Meets CA-25-4
• UL Classified, Tested to ASTM E-84
• Triple Expanding
• Weatherproofs against wind and moisture
• Fills gaps, cracks and holes
• Seals out insects and pests
• Can be sanded, painted and stained
• Complies with EPA Method 24 and California Air Resource Board Method 310
• VOC Compliant

Sikadur-Combiflex® SG-10 P is a flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. Thickness 1, 0 mm. The product is part of the Sikadur Combiflex® SG System.

CHARACTERISTICS / ADVANTAGES

• Advanced adhesion, no activation on site required
• Highly flexible - high crack and joint bridging ability
• Good chemical resistance
• Good resistance to ageing
• Resistant to UV exposure
• Resistant to root penetration
• Performs well within a wide range of temperatures
• Plasticiser-free
• Hot air weldable
• Can be used in contact with potable/drinking water

USESSealing all types of joints and cracks in many different structures and applications including:

• Tunnels and culverts
• Hydroelectric power plants
• Sewage treatment plants
• Basements
• Water retaining structures
• Drinking water reservoirs

Sealing of:

• Construction joints
• Pipe penetrations

High performance two-component polyurethane adhesives for ceramic tiles and stone material.

Applications:Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall bonding of ceramic tiles, natural stone and agglomerates, mosaic on all types of substrates normally used in building. Particularly suitable for metal, wood, fibre-cement, rubber, PVC and linoleum surfaces. Absolutely necessary for bonding natural stone and agglomerates (all types of marbles, Verde Alpi, slate, …) also subject to movement and size variation due to the absorption of water (class C of dimentional stability according to Mapei standards). Applied in a continuous layer, they create a perfect waterproof surface on which ceramic tiles can be applied with the same product. Suitable for surfaces subject to accidental contact with water (for example wooden kitchen work surfaces).Keralastic T (R2T) is the thixotropic version of Keralastic and is particularly suitable for vertical applications.
Keralastic Keralastic T are CE marked as declared in ITT certificates nº 25040320/Gi (TUM) and nº 25040471/Gi (TUM) respectively, issued by the Technische Universität München laboratory (Germany).

UsesBrushbond RFX is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal environments.
The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures.
The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, fl exible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications.

Advantages

• Excellent barrier to carbo n dioxide, chloride and sulphate ions.
• Allows water vapour to escape from the structure.
• Waterproof-suitable for water retaining structures.
• High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack.
• Non toxic - ideal for potable water tanks.
• Flexible, with thermal expansion similar to concrete.
• Excellent bond to concrete and masonry.
• Good crack accommodation capacity.
• Minimum surface preparation needed and low labour Costs.

Sikament®-4101 NS Imparts high workability and gives workability retention.

UsesSikament®-4101 NS a plasticizer for free-flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non-structural elements.

Specially recommended for the following types of concrete

• Ready mix concrete
• Precast concrete
• Site batched concrete

Characteristics / advantagesSikament®-4101 NS produces a more uniformly cohesive high quality free flowing concrete.

It has the following advantages:

• Improves water reduction.
• Improves strength and density
• Improves consistence retention
• Improves durability
• Improves water tightness/ waterproofed concrete
• Improves surface finish
• Improves cohesion properties

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. Renderoc Plug provides an initial set time of approximately one minute.

UsesFor the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.

Advantages:

• Emergency water-stopping capability
• Single component - only the addition of clean water is required
• Excellent bond to the substrate
• Low exotherm minimises thermal cracking
• Pre-bagged formulation to overcome variations in site batching
• Contains no chloride admixtures

Sika® Rustoff-100 is a single component liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat.

USES

• Sika® Rustoff-100 removes rust and prevents further rusting of:
• New or old reinforcement steel in construction
• Embedded steel in repairable structures
• Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc.
• Ball bearings, valves, tools etc. Ideal for protecting reinforcements with insufficient cover or in thin sections

CHARACTERISTICS / ADVANTAGES

• Removes rust
• Prevents further rusting by providing a passivating coat
• To be applied with brush, cotton waste swab or spray gun on the affected metal surface
• Easy to apply since it is in liquid form

For repairable structures when applied with brush /spray gun can reach even the most difficult rusted areas with congested reinforcements

SikaCeram®-155 is a cementitious polymer modified tile adhesive with no vertical slip. It can create adhesive layers up to 10 mm thickness. It is suitable for Tile size upto 4 sft on Floor and Wall. Indoor application only.

X-Roc CrystalPatch is a single component rapid setting crystalline repair mortar designed for waterproofing, repairing and sealing concrete and masonry block structures. It is designed for making watertight permanent repairs after the flow of water has been stopped.

Advantages

• Fast setting
• Withstands positive and negative hydrostatic pressure
• Can be used on damp concrete
• Easy to apply

Uses

• Concrete and masonry block structures
• Patching of tie holes and faulty construction joints
• Repairing spalled and honeycombed areas
• Filling voids in walls
• Installation of seal strips and coves
• Filling of routed out cracks

X-Pruf CrystalMix Powder is a unique crystalline additive for concrete that forms pore blocking crystal fibers which permanently waterproof treated concrete.

Advantages:

• Resists positive and negative hydrostatic pressure
• Increases concrete strength
• Increases freeze/thaw resistance of concrete
• Non toxic
• Chloride free

Uses:

• Any concrete mix requiring waterproofing
• Tunnels and subway systems
• Marine structures
• Bridges
• Foundations
• Basements and elevator pits
• Water and wastewater structures
• Parking structures
• Swimming pools

Eliminate the hassles of ladders and scaffolding to safely spray hard-to-reach areas like high walls, vaulted ceilings, stairways, and soffits. Complete the job faster with less setup time with extension rod.

The airless spray gun is the physical connection between you and a quality finish. Graco airless spray guns are recognized as the industry standard for quality, durability and performance – delivering a comfortable spraying experience and a perfect finish on every job.
Graco airless spray guns are recognized as the industry standard for quality, durability and performance – delivering perfect finishes every day, on every job. As the #1 choice of painting contractors, Graco paint spray guns are designed to be the longest lasting, most reliable airless spray guns on the market.

Uses:

• Provides a free flowing resin, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It can be used for grouting applications as well as injection of static and structural cracks. It is suitable for a wide range of heavy duty applications including:
• Provides a free flowing resin grout
• Static/structural cracks injection
• Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery
• Heavy industrial applications in steelworks, refineries chemical plants and electroplating works
• Rail track applications, to support heavy cranes, or on transporter rails

Advantages:

• Excellent durability - high compressive, flexural and tensile strengths ensure a long working life
• Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant
• User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved
• Versatile - suitable for a wide range of loading situations including repetitive dynamic loads
• Excellent in service performance - non-shrink capability ensure full surface to surface contact
• Non-shrink - ensures complete surfaces contact and bond, also ensures that it will resist hydrostatic pressur and block penetration of deleterious substances

DescriptionConbextra EP10 is a solvent free epoxy low viscosity resin that is designed to be used for grouting applications of gap widths from 0.25mm up to 10mm, as well as, for injection applications of static/structural cracks in concrete and masonry of crack widths between 0.05mm and 3mm. Due to its low viscosity, Conbextra EP10 penetrates deeply into cracks and cavities to form a permanent seal with high strength properties. It is an all liquid system consisting of base and hardener; the components are supplied in the correct mix proportions designed for whole pack mixing on site.

SikaRep® Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement.

USES

• SikaRep® Microcrete-4 is suitable for structural repairs to bridges, columns, etc. It is mainly recommended for the repair of damaged concrete structures e.g.
• Bridge columns and beams
• Concrete piling
• Slabs, etc.
• It is also recommended for grouting of large gaps

CHARACTERISTICS / ADVANTAGES

• A properly designed concrete which can be pumped of poured into restricted.
• Placement without any vibration Expansion system compensates for shrinkage settlement in plastic stage
• Easy to mix and apply, high flow characteristic, rapid strength development
• Good bond with old concrete
• Impact and vibration resistant
• Placing thickness up to 100 mm
• Contains no added chloride

Hoses are factory-tested and meet the highest safety standards. While providing the ability to support multiple guns, additional hose lengths allow you to keep your sprayer in one place — saving you valuable time to finish large jobs faster.

Filter mesh is the second line of defense against troublesome particles entering your sprayer and helps maintain a proper spraying pressure resulting in a better quality finish.

Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.
Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.
Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.

Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.
Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.
Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.

CICO NO.3 is high versatile free flowing colorless concrete additives in liquid form. It is used as quick setting cum rapid hardening admixture for concrete and plaster. This is also used as Antifreeze/deicing compound for plain concrete in sub zero climatic conditions.

USES

• CICO NO.3 is used in underground basement, tunnels, emergency repair and stop huge ingress of water through structures, such as swimming pool, water treatment plant, reservoir etc. CICO No.3 is also used for execution of underground waterproofing work which restricts the water ingress for final waterproofing treatment.
• It is also used in factory for emergency repair during short duration of shutdown.
• CICO No.3 is used for pointing of leaky joints.

FEATURES

• Easy to use versatile concrete additives.
• Very useful product for pre-cast industries.
• Very useful emergency repair in factory.
• Highly useful for stoppage of water ingress through underground structures.
• Most useful in cold weather concreting, particularly when temperature reaches below zero degree.
• Very useful for early stripping of shutters.
• Useful for sealing joints in masonry, cracks/joints in tunnels etc.
• For underground waterproofing work CICO No.3 plays a very vital role.

Sikament® 5203 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

Uses

• Sikament® 5203 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally, it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast® 5203 NS is used for the following
• A wide range of applications where excellent workability is requested
• Concrete with high water reduction High efficient concrete applications
• Variable use in different concrete systems with different raw materials

Characteristics / Advantages Sikament® 5203 NS is a powerful superplasticiser based on advanced technology which gives the following advantages:

• Strong water reduction, resulting in high density, high strength and reduced Permeability
• Less sensitive against variations in aggregates and / or different cement types
• High efficiency even at low dosage rates
• Extended workability in conjunction with subsequent strength development
• Superior plasticising effect, resulting in improved flow, placing and compaction

X-Pruf CrystalCoat is a one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure. Composition X-Pruf CrystalCoat consist of active, non soluble, non toxic, waterproof chemicals contained in a cementitious carrier that crystallizes in the presence of water and free lime in the concrete

Advantages:

• Penetrates concrete, seals capillaries and hairline cracks
• Withstands positive and negative hydrostatic pressure
• Suitable for use with potable water
• Easy to apply
• Can be used on damp concrete
• Crystals continue to grow until cracks are sealed
• Chloride free
• Allows concrete to breath
• No odor

Uses:

• Concrete and block substrates
• Above or below ground structures
• Potable water tanks
• Wastewater structures
• Basements
• Elevator pits
• Tunnels
• Interior and exterior waterproofing

A concrete / mortar admixture in liquid form that acts both as a plasticizer and waterproofing compound.

USESSika® Plastocrete® Plus is recommended for use in structural concrete such as:

• Sloped Roof Slab
• Flat Roof Slab
• Beams
• Columns
• Slabs etc

Also used in:

• Internal and external plaster of buildings etc.
• Repair and renovation

CHARACTERISTICS / ADVANTAGESSika® Plastocrete® Plus provides the following beneficial properties :

• Improved workability without increased water content
• Allows easier compaction leading to denser concrete and superior finish
• Reduced shrinkage
• Improved water tightness
• Chloride free - does not attack reinforcement

A two component, low viscosity, solvent free injection grouting system designed to give superior bonding & high compressive strength for concrete, mortar, steel & wood. The other advantages include high toughness, no shrinkage, and superior compressive strength.

Polyethylene foam joint rod typically used in the for filling expansion joints prior to sealing. Poly backer rod can be used in many substrates, such as concrete, brick or block work and metals. The foam backing rod helps to prevent a joint from failing and significantly reduces the amount of sealant being used. Our backer rod does not rot and is chemically neutral.
Non absorbent compressible white closed cell polyethylene foam backup material.

Recommended For:

• Reducing the depth of joints in construction and glazing use.
• Creating a backstop to allow proper sealant tooling in expansion joints.
• Does not rot. Physically and chemically neutral.

BOSS® 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. BOSS® 333 has excellent insulating properties and superb adhesion to virtually all building materials

USES

• Air sealing
• Partition walls with ceilings
• Through penetrations around cables and pipes
• Seams between chimneys, roof protection, roof panels and wall panels

FEATURES

• Meets CA-25-4
• UL Classified, Tested to ASTM E-84
• Triple Expanding
• Weatherproofs against wind and moisture
• Fills gaps, cracks and holes
• Seals out insects and pests
• Can be sanded, painted and stained
• Complies with EPA Method 24 and California Air Resource Board Method 310
• VOC Compliant

Sikadur-Combiflex® SG-10 P is a flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. Thickness 1, 0 mm. The product is part of the Sikadur Combiflex® SG System.

CHARACTERISTICS / ADVANTAGES

• Advanced adhesion, no activation on site required
• Highly flexible - high crack and joint bridging ability
• Good chemical resistance
• Good resistance to ageing
• Resistant to UV exposure
• Resistant to root penetration
• Performs well within a wide range of temperatures
• Plasticiser-free
• Hot air weldable
• Can be used in contact with potable/drinking water

USESSealing all types of joints and cracks in many different structures and applications including:

• Tunnels and culverts
• Hydroelectric power plants
• Sewage treatment plants
• Basements
• Water retaining structures
• Drinking water reservoirs

Sealing of:

• Construction joints
• Pipe penetrations

High performance two-component polyurethane adhesives for ceramic tiles and stone material.

Applications:Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall bonding of ceramic tiles, natural stone and agglomerates, mosaic on all types of substrates normally used in building. Particularly suitable for metal, wood, fibre-cement, rubber, PVC and linoleum surfaces. Absolutely necessary for bonding natural stone and agglomerates (all types of marbles, Verde Alpi, slate, …) also subject to movement and size variation due to the absorption of water (class C of dimentional stability according to Mapei standards). Applied in a continuous layer, they create a perfect waterproof surface on which ceramic tiles can be applied with the same product. Suitable for surfaces subject to accidental contact with water (for example wooden kitchen work surfaces).Keralastic T (R2T) is the thixotropic version of Keralastic and is particularly suitable for vertical applications.
Keralastic Keralastic T are CE marked as declared in ITT certificates nº 25040320/Gi (TUM) and nº 25040471/Gi (TUM) respectively, issued by the Technische Universität München laboratory (Germany).

UsesBrushbond RFX is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal environments.
The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures.
The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, fl exible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications.

Advantages

• Excellent barrier to carbo n dioxide, chloride and sulphate ions.
• Allows water vapour to escape from the structure.
• Waterproof-suitable for water retaining structures.
• High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack.
• Non toxic - ideal for potable water tanks.
• Flexible, with thermal expansion similar to concrete.
• Excellent bond to concrete and masonry.
• Good crack accommodation capacity.
• Minimum surface preparation needed and low labour Costs.

Sikament®-4101 NS Imparts high workability and gives workability retention.

UsesSikament®-4101 NS a plasticizer for free-flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non-structural elements.

Specially recommended for the following types of concrete

• Ready mix concrete
• Precast concrete
• Site batched concrete

Characteristics / advantagesSikament®-4101 NS produces a more uniformly cohesive high quality free flowing concrete.

It has the following advantages:

• Improves water reduction.
• Improves strength and density
• Improves consistence retention
• Improves durability
• Improves water tightness/ waterproofed concrete
• Improves surface finish
• Improves cohesion properties

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. Renderoc Plug provides an initial set time of approximately one minute.

UsesFor the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.

Advantages:

• Emergency water-stopping capability
• Single component - only the addition of clean water is required
• Excellent bond to the substrate
• Low exotherm minimises thermal cracking
• Pre-bagged formulation to overcome variations in site batching
• Contains no chloride admixtures

Sika® Rustoff-100 is a single component liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat.

USES

• Sika® Rustoff-100 removes rust and prevents further rusting of:
• New or old reinforcement steel in construction
• Embedded steel in repairable structures
• Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc.
• Ball bearings, valves, tools etc. Ideal for protecting reinforcements with insufficient cover or in thin sections

CHARACTERISTICS / ADVANTAGES

• Removes rust
• Prevents further rusting by providing a passivating coat
• To be applied with brush, cotton waste swab or spray gun on the affected metal surface
• Easy to apply since it is in liquid form

For repairable structures when applied with brush /spray gun can reach even the most difficult rusted areas with congested reinforcements

SikaCeram®-155 is a cementitious polymer modified tile adhesive with no vertical slip. It can create adhesive layers up to 10 mm thickness. It is suitable for Tile size upto 4 sft on Floor and Wall. Indoor application only.

X-Roc CrystalPatch is a single component rapid setting crystalline repair mortar designed for waterproofing, repairing and sealing concrete and masonry block structures. It is designed for making watertight permanent repairs after the flow of water has been stopped.

Advantages

• Fast setting
• Withstands positive and negative hydrostatic pressure
• Can be used on damp concrete
• Easy to apply

Uses

• Concrete and masonry block structures
• Patching of tie holes and faulty construction joints
• Repairing spalled and honeycombed areas
• Filling voids in walls
• Installation of seal strips and coves
• Filling of routed out cracks

X-Pruf CrystalMix Powder is a unique crystalline additive for concrete that forms pore blocking crystal fibers which permanently waterproof treated concrete.

Advantages:

• Resists positive and negative hydrostatic pressure
• Increases concrete strength
• Increases freeze/thaw resistance of concrete
• Non toxic
• Chloride free

Uses:

• Any concrete mix requiring waterproofing
• Tunnels and subway systems
• Marine structures
• Bridges
• Foundations
• Basements and elevator pits
• Water and wastewater structures
• Parking structures
• Swimming pools

Eliminate the hassles of ladders and scaffolding to safely spray hard-to-reach areas like high walls, vaulted ceilings, stairways, and soffits. Complete the job faster with less setup time with extension rod.

The airless spray gun is the physical connection between you and a quality finish. Graco airless spray guns are recognized as the industry standard for quality, durability and performance – delivering a comfortable spraying experience and a perfect finish on every job.
Graco airless spray guns are recognized as the industry standard for quality, durability and performance – delivering perfect finishes every day, on every job. As the #1 choice of painting contractors, Graco paint spray guns are designed to be the longest lasting, most reliable airless spray guns on the market.

Uses:

• Provides a free flowing resin, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It can be used for grouting applications as well as injection of static and structural cracks. It is suitable for a wide range of heavy duty applications including:
• Provides a free flowing resin grout
• Static/structural cracks injection
• Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery
• Heavy industrial applications in steelworks, refineries chemical plants and electroplating works
• Rail track applications, to support heavy cranes, or on transporter rails

Advantages:

• Excellent durability - high compressive, flexural and tensile strengths ensure a long working life
• Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant
• User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved
• Versatile - suitable for a wide range of loading situations including repetitive dynamic loads
• Excellent in service performance - non-shrink capability ensure full surface to surface contact
• Non-shrink - ensures complete surfaces contact and bond, also ensures that it will resist hydrostatic pressur and block penetration of deleterious substances

DescriptionConbextra EP10 is a solvent free epoxy low viscosity resin that is designed to be used for grouting applications of gap widths from 0.25mm up to 10mm, as well as, for injection applications of static/structural cracks in concrete and masonry of crack widths between 0.05mm and 3mm. Due to its low viscosity, Conbextra EP10 penetrates deeply into cracks and cavities to form a permanent seal with high strength properties. It is an all liquid system consisting of base and hardener; the components are supplied in the correct mix proportions designed for whole pack mixing on site.

SikaRep® Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement.

USES

• SikaRep® Microcrete-4 is suitable for structural repairs to bridges, columns, etc. It is mainly recommended for the repair of damaged concrete structures e.g.
• Bridge columns and beams
• Concrete piling
• Slabs, etc.
• It is also recommended for grouting of large gaps

CHARACTERISTICS / ADVANTAGES

• A properly designed concrete which can be pumped of poured into restricted.
• Placement without any vibration Expansion system compensates for shrinkage settlement in plastic stage
• Easy to mix and apply, high flow characteristic, rapid strength development
• Good bond with old concrete
• Impact and vibration resistant
• Placing thickness up to 100 mm
• Contains no added chloride

Hoses are factory-tested and meet the highest safety standards. While providing the ability to support multiple guns, additional hose lengths allow you to keep your sprayer in one place — saving you valuable time to finish large jobs faster.

Filter mesh is the second line of defense against troublesome particles entering your sprayer and helps maintain a proper spraying pressure resulting in a better quality finish.

Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.
Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.
Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.

Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.
Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.
Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.

CICO NO.3 is high versatile free flowing colorless concrete additives in liquid form. It is used as quick setting cum rapid hardening admixture for concrete and plaster. This is also used as Antifreeze/deicing compound for plain concrete in sub zero climatic conditions.

USES

• CICO NO.3 is used in underground basement, tunnels, emergency repair and stop huge ingress of water through structures, such as swimming pool, water treatment plant, reservoir etc. CICO No.3 is also used for execution of underground waterproofing work which restricts the water ingress for final waterproofing treatment.
• It is also used in factory for emergency repair during short duration of shutdown.
• CICO No.3 is used for pointing of leaky joints.

FEATURES

• Easy to use versatile concrete additives.
• Very useful product for pre-cast industries.
• Very useful emergency repair in factory.
• Highly useful for stoppage of water ingress through underground structures.
• Most useful in cold weather concreting, particularly when temperature reaches below zero degree.
• Very useful for early stripping of shutters.
• Useful for sealing joints in masonry, cracks/joints in tunnels etc.
• For underground waterproofing work CICO No.3 plays a very vital role.

Sikament® 5203 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

Uses

• Sikament® 5203 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally, it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast® 5203 NS is used for the following
• A wide range of applications where excellent workability is requested
• Concrete with high water reduction High efficient concrete applications
• Variable use in different concrete systems with different raw materials

Characteristics / Advantages Sikament® 5203 NS is a powerful superplasticiser based on advanced technology which gives the following advantages:

• Strong water reduction, resulting in high density, high strength and reduced Permeability
• Less sensitive against variations in aggregates and / or different cement types
• High efficiency even at low dosage rates
• Extended workability in conjunction with subsequent strength development
• Superior plasticising effect, resulting in improved flow, placing and compaction

X-Pruf CrystalCoat is a one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure. Composition X-Pruf CrystalCoat consist of active, non soluble, non toxic, waterproof chemicals contained in a cementitious carrier that crystallizes in the presence of water and free lime in the concrete

Advantages:

• Penetrates concrete, seals capillaries and hairline cracks
• Withstands positive and negative hydrostatic pressure
• Suitable for use with potable water
• Easy to apply
• Can be used on damp concrete
• Crystals continue to grow until cracks are sealed
• Chloride free
• Allows concrete to breath
• No odor

Uses:

• Concrete and block substrates
• Above or below ground structures
• Potable water tanks
• Wastewater structures
• Basements
• Elevator pits
• Tunnels
• Interior and exterior waterproofing

A concrete / mortar admixture in liquid form that acts both as a plasticizer and waterproofing compound.

USESSika® Plastocrete® Plus is recommended for use in structural concrete such as:

• Sloped Roof Slab
• Flat Roof Slab
• Beams
• Columns
• Slabs etc

Also used in:

• Internal and external plaster of buildings etc.
• Repair and renovation

CHARACTERISTICS / ADVANTAGESSika® Plastocrete® Plus provides the following beneficial properties :

• Improved workability without increased water content
• Allows easier compaction leading to denser concrete and superior finish
• Reduced shrinkage
• Improved water tightness
• Chloride free - does not attack reinforcement