Industrial Valves #5857218

Severe-service union-bonnet and instrumentation blow-down valves, Screwed-bonnet needle valves, General utility and forged-body needle valves, High-pressure needle valves, Gauge valves and rising plug valves, Compression valves for the sanitary industries.

Compact combination design, face to face dimensions.

Body: Cast Iron, Ductile Iron,

Seat: Stainless Steel,

Bracket: Stainless Steel,

Lever: Stainless Steel,

Piston: Rubber,

Floating Ball: Stainless Steel,

Bolts: Galvanized Steel.

Hydraulic Control Slow Closing Non-return Butterfly Valve, Normally named as HydraulicCounterweight Butterfly Valve is one type of Advanced Products used for management on Controlling Equipments.

Can replace the functions of Gate Valve or Check Valve.

DN150-DN400.

Connecting Dimensionspressure 150lb-300lb

Characterstics:

Simple and compact structure, strong reliability, easy to dismantle and repair, labour saving, light and handy.

Size:

2-42".

Double eccentric structure design, reliable in sealing performance, simple and compact structure.

Fire safe design, available in iron steel, stainless steel, etc.

2-52"

Fast make-up and break-out, indicator lens shows stem's position and actual orifice area, Anti-clockwise rotation opens the valve and clockwise rotation will close the valve.

2 1/16" - 7 1/16"

Investment casting bodyScrewed Bonnet wedge discIntegral Seat.Working pressure: 200WOGConnection type: inside screws.

water, oil, air and some corrosive liquids.

1/2, 3/4, 1, 11/2, 11/4, 2.

OS&Y Construction, Bolted BonnetFull Port Or Reduced Bore.

Manual, Electric, Hydrau-Pneumatic Actuator.

2 - 12"NB.

SDNR Globe Check Valve from rechon vango valve are available both in types of straight through and Angle type which with main features as below: Screw down Non-return.

1/2NB to 20NB.

Bronze, Iron, Carbon Steel, Stainless Steel and Duplex Stainless Steel, Other special materials will be also available upon request.

Pressure Sealed DesignSolid, Flexible or Split Wedge DesignBack-seating, Renewable Seat RingFull Port Or Reduced Bore.

2 - 32NB.

WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materi--als available to suit service conditions.

Design and manufacture: BS 1873, ANSI B16.34

Inspection and test: API 598

End flange dimensions: ANSI B16.5

BW end dimensions: ANSI B16.25

Socket-weld dimensions: ANSI B16.11

Face to face and end to end: ANSI B16.10.

1/2 16.

Bolted Bonnet, OS&Y, Double Bellow & Sealing, Convenient Maintenance, Position Indicator.

3/8 - 12NB

WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.

Design and manufacture: BS1873

Face to face dimensions: DIN3202

DN15 400mm.

cast steel, stainless steel, cast iron , 1.0619 (GS-C25), 1.4308, 1.4408, 1.7363, 1.7357, 1.7380.

Non-Slam Check Valve is one of the best check valves, it closes prior to reserve flow, it provides minimum pressure loss with excellent dynamic performance.

minimizes water hammer, Excellent Performance, scheduled maintenance.

Double Disc Wafer Check Valve is a full swing check valve. Available in different sizes.

2-40"

Flange Ends, Quality Tested, Quality Inspected.

Tilting Disc Check Valve is available in both bolted covers and pressure sealed design.

2-42" NB

Flange & Buttwelding End connections, Quality Tested, Quality Inspected, Two piece design with bolted body.

Pressure Sealed Check Valve comes with a pressure sealed design. In Solid, Flexible or Split Wedge design.

2-32" NB

Flanged, Buttweld, Socket Weld, Hub Connectors, Compact Flange End Connections, Quality Tested, Available in Manual, Automatic, Hydra-pneumatic Actuators.

Swing Flex Check Valve comes with resiliant seated check valve design.

2-24" NB

Flanged dimensions, Quality Tested, Quality Inspected.

Ridhiman Alloys provide high quality API Check Valve for all your need. Our valves are quality tested.

Face to Face dimensions, Quality Inspected, Quality Tested.

Ridhiman Alloys provide high quality API Single Disk Check Valve with single disk design.

Flanged dimensions, Quality Tested, Quality Inspected.

Ridhiman Alloys provide integrated lug type structure for Integrated Lug Type Check Valve.

2-40" NB

Flanged dimensions, Flange Ends, Quality Tested, Quality Inspected.

Knife Gate Valve are With advantages of compact structure, reasonable design, material saving, reliable sealing, convenient operation, small volume, full passage flow, small flow resistance, small weight, easy installation and maintenance.

Through Going Gate Valve, EN Wafer Knife Gate Valve, Wafer Knife Gate Valve, Mono-Block Knife Gate Valve, 3Fully Lugged Knife Gate Valve.

2 - 50"NB.

Full bore EnsuredSolid Wedge DiscSuitable medium: water, oil, gas.

DN40- DN600

Metal Seat (Brass , Bronze or Stainless steel Trim).

Bellow Sealed Gate Valves are Applicable for the Cutting and Connection of Pipelines Medium That are Used in Various Industries Such as Petroleum, Chemical, Pharmacy, Chemical Fertilizer and Electric Power Plants etc under Nominal Pressures.

Reasonable structure, reliable sealing, excellent performance, double sealing for perfect operation.

Chemical Industry, Power Plant, Petrochemical Industry,

Shipping Industry and many other industries.Face to Face Dimension: Manufacturer StandardConstruction: Standard & Sealing TypeHigh Pressure Ratings.

Size:

3 - 42"NB

Material:

WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.

Double Bellow & Sealing, Convenient Maintanence, Position Indicator Flanged Dimension: ANSI/ASME B16.5, JB79, S.W Ends: ANSI B16.11, Screwed Ens: ASME B1.20.1Face to Face Dimension: ANSI/ASME B16.10, GB/T12221Inspect & Tested.

3/8 to 2NB

WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials.

Full bore EnsuredSolid Wedge DiscMetal Seat (Brass, Bronze or Stainless steel Trim)Suitable medium: Water, oil, gas.

DN40 - DN600

Orbit Plug Valve comes with a fire safe design and is available in different trim materials.

Inspected, Quality Tested, Fire safe design, High Pressure Rating.

1/2-42" NPS

Orbit Plug Valve comes with a fire safe design and is available in different trim materials.

1/2-42" NPS

Inspected, Quality Tested, Fire safe design, High Pressure Rating.

Orbit Plug Valve comes with a fire safe design and is available in different trim materials.

1/2-42" NPS

Fire safe design, High Pressure Rating, Inspected, Quality Tested.

Orbit Plug Valve comes with a fire safe design and is available in different trim materials.

Fire safe design, Inspected, High Pressure Rating, Quality Tested.

1/2-42" NPS

Handwheel, Pneumatic, Electric.

1/2"-12" NB

Stainless Steel, Cast Iron, Cast Steel, Ductile Iron & Duplex Stainless Steel.

Pneumatic, Handwheel, Electric.

1/2"-12" NB

Cast Iron, Stainless Steel, Ductile Iron, Cast Steel & Duplex Stainless Steel.

Compact micro design, face to face dimensions.

Body: Cast Iron, Ductile Iron,

Seat: Stainless Steel,

Floating Ball: Stainless Steel,

Bracket: Stainless Steel,

Piston: Rubber,

Lever: Stainless Steel,

Bolts: Galvanized Steel.

Compact design, face to face dimensions, inspected and tested.

Body: Brass,

Seat: Brass,

Bracket: Brass.