RKB International Rourkela, Odisha

1. Split Roller bearing is basically a Cylindrical Roller Bearing cut into two halves. 2. All the components like i.e. Inner race, outer race and Roller cage assembly are all split on a highly sophisticated equipment to retain the original. 3. These bearings are used mainly in the middle of shafts where mounting and dismounting can be done without disturbing adjacent components.

- Bladder accumulators provide storage and release of hydraulic energy. - The bladder serves simultaneously as a media separator or transfer barrier. 1. Cost-optimized. 2. maintenance free. 3. wear resistant. 4. durable. 5. available in designs for special media and applications as well as suited for use under extreme conditions.

1. Available from 2 to 12 sections in two sizes. 2. Within each size there are different displacements. The dimensions of the sections vary with their displacement in the length of the housing. 3. The sections are executed with an internal connection and every second chamber has an inlet port. 4. We can offer two different executions: Version A – is executed with an into the housing integrated combined pressure relief and suction valve. Version EA – with in- and outlet blocks for end position compensation made from steel (EA9) or aluminum (EA7). The sectional inlet blocks are manufactured with an internal connection and variable usable inlet ports. The outlet blocks have integrated pressure relief valves for seondary loop protection, suction valves and measuring ports for each section.

The most important feature of support and idler rollers is the thick-walled outer ring. Buildup or elements: 1.Inner ring (IR) or axle 2.Rolling elements (cage or full complement double row) 3.Spacer disc 4.Outer ring (roll or roller sleeve) 5.possible variations: for guidance or retaining higher axial loads with axial bearings sealed variations Supporting roller guide roller are not standardised!

1. The SACRB bearing combines the heavy radial load capability and a self aligning feature for one of the most capable bearing on the market. 2. The SACRB unit has an intermediate ring with spherical OD which allows the bearing to handle dynamic misalignment. Its design also allows axial float within the bearing as a separate feature also in a dynamic way. 3. It is recommended for low speed heavy load application.