RMS Energy is promoted by a group of entrepreneurs who are sensitive to environment friendly processes and products. The promoters of RMS Energy have vast experience in Green Power Generation, Renewable Energy Systems, other Alternative Energy.. Read More
SPECIFICATIONS The broad performance specifications of a W-LED light source based solar lantern system are given below: PV Module : 4/5 Wp under STC Battery : Sealed Maintenance Free (SMF) lead acid battery of 12V, 7AH OR NiMH or Lithium-Ion or Lithium Ferro Phosphate Battery Duty cycle : 4 hours a day (at full brightness level), under average daily insolation of 5.5 kWh/ sq.m. on a horizontal surface. Autonomy : Minimum of 3 days or 12 operating hours per permissible discharge. Light Source : 2.0 Watts (max.) W-LED luminaire, dispersed beam, soothing to eyes with the use of proper optics and diffuser Light Output : Multiple Light levels The lamp should have two levels of light (operation at 100 % power and 60% power) to take care-of the different lighting needs, as per the User requirements. Minimum level of illumination from W-LED lantern (at full brightness level) should be as follows:
Features and Specifications No inverter - D.C. motor connects directly to solar array Rugged construction Simple installation and maintenance Highly reliable No conventional grid electricity required Long operating life Highly reliable and durable Easy to operate and maintain Eco-friendly No fuel cost- uses abundantly available free solar energy Solar Photovoltaic Panels Stand & Accessories Solar submersible pump Applications Village water supply Livestock watering Water supply to remote homes / agriculture Micro-Irrigation Submersible Pump Solar Water Pumping Systems is a stand-alone system operating on power generated by Solar Photovoltaic Panels. The power generated by Solar Panels is used for operating Solar Submersible pump for lifting water from open well, water reservoir or tube well for irrigation and drinking water purpose. The system requires a shadow-free area for installation of the Solar Panels.
Voltage rang:110V-280V AC, Frequency Range:50Hz +- 5Hz, AVR:Four steps AVR 220v±10%.Inversion voltage:220V±3%, Inversion frequency:50Hz±2%, OP waveform:Sine wave. Transfer time:≤4ms Automatic transfer. Protections:Protection against short-circuit, overload. Shipping size (mm):490*236*290.
The only smallmid sized wind turbine which has been type tested & certified by CWET (Centre for Wind Energy Technology, India) for "Power Performance" as per IEC 61400-12-1 & for "Safety & Functional Test" as per IEC 61400-2. The AIR X Marine is similar to AIR X Land but powder coated corrosion proof machine for in sea or near sea applications. Worldwide it is the most efficient wind turbine in its class. Power output to capacity ratio is highest. It generates more power than any other wind turbine (per KW of rated capacity) at low wind speed areas. It can be easily mounted on roof tops or telecom towers.
You will have hot water when you need it, have no recurring cost of electricity, years of trouble free use and the assurance of a great service backup. In other words, total peace of mind! What's more, you will be helping the environment. It is an equipment to heat Water using solar energy. It does not produce electricity but carries heat energy. Jain We supply, install and commission systems to satisfy your hot water needs. It is ideal for domestic use. Benefits : Negligible maintenance, daily water heating expenses almost nil, conserves precious natural resources, exemption from octroi & excise duty, 80% depreciation for commercial use. Features : Saves energy & environment, easy to install & maintain, no fear of shock/ accidents, long life, huge savings. Uses : Bungalows, Apartments, Guest Houses, Lodges, Hotels, Hospitals, Heath Clubs, Dairies, and wherever & whenever you need hot water. Models : Evacuated tube collector system is for non pressurized application. Available in 100 to 500 LPD. Higher capacity systems are available on request. Evacuated tube collector This is heart of the solar system. Evacuated tubes are made up of borosilicate glass coated with AL-N/AL using sputtering technique. This is worlds latest innovative technique of black coating to achieve highest efficiency. Insulated Hot Water Tank Stainless Steel hot water tank with outer cladding of G.I. precoated sheet, insulated with 40 mm thick PUF insulation. This ensures least overnight temperature drop. Mounting Racks Generally, mounting racks are designed for flat roof. This rack is assembled by SS. Fasteners at site using L-shaped pre-fabricated & powder coated steel sections. How about rainy season? Solar Water heater is designed for year round performance. It needs about 7 hours of normal solar radiation for desired performance. As an auxiliary support, electric heater is fitted when hot water availability is not as expected.
Share your thoughts with other customers for RMS Energy Private Limited
Add Review
