We are offering pinion gear box. specifications steel fabricated body and accurately machined, totally enclosed, oil tight, having a sufficient lubrication system and dust proof.Gears made of en-9, en-19 or en-24 according to the requirement.The gears are made in d.p. And module formula with single or double helical teeth.3 hi or 2 hi as per order suitable for 6 to 20 pcd mills.

Reduction Gear Box is used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a connected set of rotating gears by which power is transmitted or motion or torque is changed. We manufacture single stage, double stage or multistage gear boxes.

 

Qualities

1. Gear boxes designed as per ASTM/DIN/ Indian standards.
2. Designed to dampen vibrations.
3. Work efficiently at peak loads.
4. Single, double & multi stage.
5. Desired gear ratio.
6. Gears in DP system and module.
7. Forced, Splash & Spray Lubrication.

Fabrication

1. Steel fabricated body and housing.
2. Double oil seals.
3. Spherical Roller Bearing.
4. Heat dissipation window.
5. Fully machined Shaft.
6. Hardened & grinded gear for smooth run(forged EN-9, EN-19, EN-24 steel).
7. Size range of 150mm PCD up to 750mm PCD.
8. Speed of 50 RPM to 1500 RPM.
9. All Shafts of material forged class-IV.
10. Branded Heavy Duty Antifriction Spherical Roller Bearings are installed after thorough calculation.
11. Double Oil Seals complete with Internal & External Pipeline for lubrication of Gears & Bearings is provided.
12. Inspection window at various levels is provided for proper viewing of gears inside the gear box.
13. Flow indicator, temperature indicator and proper interlocking with mill is done.
14. Vent Pipes are provided for release of heat and oil from inside the Gear Box.
15. 72 Hour Non-stop trial of gear box is done on various speeds before dispatch.
16. Vibration, voice and lapping levels are thoroughly checked on trial before dispatch.

Crane Duty Gear Boxes are designed for crane duty applications .Helical gearing is provided for horizontal gear units where as spur gears are provided for vertical gear units. Single, Double and Triple stage Horizontal gear units are recommended for Hoist.

We provide complete solutions for TMT Plant. for superior mechanical properties in strength, weld ability, ductility, and bendability, meeting International quality standards. Our TMT plant supports Size ranges from 8mm to 40mm and speeds up to 25 meters per second.After the hot rolled bar leaves the finishing mill stand , It is rapidly quenched by a water spray system hardening the surface of the bar to an optimized depth optimized through formation of martensitic rim while the core remains hot and austenitic.

Roller guide boxes are employed in a continuous rolling operation at input side. Simple design allows easy installation with smooth operation in different rolling conditions. It is made out of non magnetic Stainless Steel. It has low power consumption.

We provide complete solutions for TMT Plant. for superior mechanical properties in strength, weld ability, ductility, and bendability, meeting International quality standards. Our TMT plant supports Size ranges from 8mm to 40mm and speeds up to 25 meters per second.

We are offering pinion gear box. specifications steel fabricated body and accurately machined, totally enclosed, oil tight, having a sufficient lubrication system and dust proof.Gears made of en-9, en-19 or en-24 according to the requirement.The gears are made in d.p. And module formula with single or double helical teeth.3 hi or 2 hi as per order suitable for 6 to 20 pcd mills.

Reduction Gear Box is used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a connected set of rotating gears by which power is transmitted or motion or torque is changed. We manufacture single stage, double stage or multistage gear boxes.

 

Qualities

1. Gear boxes designed as per ASTM/DIN/ Indian standards.
2. Designed to dampen vibrations.
3. Work efficiently at peak loads.
4. Single, double & multi stage.
5. Desired gear ratio.
6. Gears in DP system and module.
7. Forced, Splash & Spray Lubrication.

Fabrication

1. Steel fabricated body and housing.
2. Double oil seals.
3. Spherical Roller Bearing.
4. Heat dissipation window.
5. Fully machined Shaft.
6. Hardened & grinded gear for smooth run(forged EN-9, EN-19, EN-24 steel).
7. Size range of 150mm PCD up to 750mm PCD.
8. Speed of 50 RPM to 1500 RPM.
9. All Shafts of material forged class-IV.
10. Branded Heavy Duty Antifriction Spherical Roller Bearings are installed after thorough calculation.
11. Double Oil Seals complete with Internal & External Pipeline for lubrication of Gears & Bearings is provided.
12. Inspection window at various levels is provided for proper viewing of gears inside the gear box.
13. Flow indicator, temperature indicator and proper interlocking with mill is done.
14. Vent Pipes are provided for release of heat and oil from inside the Gear Box.
15. 72 Hour Non-stop trial of gear box is done on various speeds before dispatch.
16. Vibration, voice and lapping levels are thoroughly checked on trial before dispatch.

Crane Duty Gear Boxes are designed for crane duty applications .Helical gearing is provided for horizontal gear units where as spur gears are provided for vertical gear units. Single, Double and Triple stage Horizontal gear units are recommended for Hoist.

We provide complete solutions for TMT Plant. for superior mechanical properties in strength, weld ability, ductility, and bendability, meeting International quality standards. Our TMT plant supports Size ranges from 8mm to 40mm and speeds up to 25 meters per second.After the hot rolled bar leaves the finishing mill stand , It is rapidly quenched by a water spray system hardening the surface of the bar to an optimized depth optimized through formation of martensitic rim while the core remains hot and austenitic.

Roller guide boxes are employed in a continuous rolling operation at input side. Simple design allows easy installation with smooth operation in different rolling conditions. It is made out of non magnetic Stainless Steel. It has low power consumption.

We provide complete solutions for TMT Plant. for superior mechanical properties in strength, weld ability, ductility, and bendability, meeting International quality standards. Our TMT plant supports Size ranges from 8mm to 40mm and speeds up to 25 meters per second.