Our Products
We offer a wide collection ofTangential Chasersuch as thread cutting chaser, pipe threading chaser, bolt threading chaser and rod threading chaser. We stand amid the well known steel tangential chasers suppliers in India. We are specializedROHITA Industriestangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard proven imported high speed steel. These ROHITA Industries Tangential Chasers are designed as per international threading standard, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1" to 6"depending on the size of the die head.BSP, BSPT, NPT, UNF, UNC, BSWthreads that can be excellently and easily be cut on this tangential chaser.
ROHITATangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.
ROHITAChaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set.
Die-Head Size | Holder Set/Sets (Provided) | Chaser Section |
---|---|---|
1/4" to 1" | 1/4" to 1" | 3" x 1.3/64 (Set of 4 Pcs) |
3/8" to 1. 1/2" | 3/8" to 1. 1/2" | 4" x 1.3/64 (Set of 4 Pcs) |
1/2" to 2.1/2" | 1/2" to 1. 1/2" & 1.5/8 to 2.1/2" | 4" x 1.1/4" (Set of 4 Pcs) |
1" to 4" |
1" to 2" 2.1/2" to 4" |
4" x 1.1/4" (Set of 4 Pcs) 5" x 2.1/4" (Set of 4 Pcs) |
2.1/2" to 6" |
2.1/2" to 3" 3.1/2" to 4" 4.1/2" to 6" |
5" x 2.1/4" (Set of 6 Pcs) |
4" to 8" |
4" to 5.1/2" 5.1/2" to 8" |
5" x 2.1/4" (Set of 6 Pcs |
The Pipe Threading Machinesare designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum Conditions of severe with minimum maintenance . all the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally they are built with high standard of workmanship, material and quality so closely associated with COMPANY TRADITION .
Head Stock :The Head Stock is of top quality casting providing support to the spindle bearing. The Spindle Swing taper roller bearing are of best steel with a ground finish to give accurate results. Gears of head stock are running oil bath with oil level window .
The Bed :The bed is pillar type having two pillar made of best steel , nicely ground & hard chrome plated and also aligned accurately to the head stock alignment .
The saddle :The saddle is fitted on two pillars very precisely , it run on pillars very smoothly and accurately to the head stock alignment.
The Apron :The Apron gives movement to the saddle towards head trevers along with pillars through steel rack and pinion arrangements. Its all gear are made of best steel.
Vice Jaws:The Vice jaws are fitted on the saddle with best steel hard chrome plated rods accurate . The jaws are made of best steel and are well hardened . The movements of jaws are controlled by a screw on the saddle .
Sr. No. | Pipe Nominal Bore | Spindle RPM App. | Pipe Threading Power HP | Required RPM |
---|---|---|---|---|
1 | 1/2" to 2-1/2" PVC | 137 & 182 | 3 | 1000 |
2 | 1/2" to 2-1/2" | 60 , 90 & 120 | 7.5 | 1500 |
3 | 1/2" to 4" | 40 , 75 & 115 | 10 | 1000 |
4 | 2-1/2" to 6" | 25 & 40 | 15 | 1000 |
5 | 1/2"" to 21/2"" scaffolding | 40, 60 & 80 | 7.5 | 1000 |
6 | 2-1/2"; to 6" PVC | 32, 48, 69 & 97 | 10 | 1000 |
7 | 4" to 8" PVC | 25, 36 & 47 | 20 | 960 |
Sr. No. | Pipe Nominal Bore | Spindle RPM App. | End Facing Machine Power HP | Required RPM |
---|---|---|---|---|
1 | 1/2" to 2-1/2" | 120, 175, & 240 | 3 | 1500 |
2 | 1/2" to 6" | 40, 75, 115 | 5 | 1000 |
3 | 21/2" to 6" | 60, 75 & 90 | 7.5 | 1000 |
We Manufacture Milling Machinethat is use to provide a perfect shape to various metals. We use high tech machines to produce our high class milling machine. It is used at the cutting edge of the manufacturing process. The machine is widely used in various industries and has received appreciation for its fast and efficient performance, in particular.
We offera comprehensive range of Vertical Milling Machines widely used for shaping of metal and other solid materials. The cutting speed in the machine is generated by the tool and its feed rate is generated by work piece rotation. Our milling machine come with improved features that ensure maximum work efficiency and excellent productivity. These machine has compact structure, which makes them easy to handle and maintain. The processing is done with one or two milling units possible delivering an accurate performance.
Model No. | 0 no. | 0A no. | 1 no. | 1.1/2 no. | 2 no. | 3 no. |
Surface Of Table | 25"*7" | 30"*7" | 40"*9" | 48"*10" | 50"*11" | 56"*12" |
No. Of Tee Slots | 3 | 3 | 3 | 3 | 3 | 3 |
Size Of Tee Slots | 3/8 | 3/8 | 1/2 | 1/2 | 1/2 | 5/8 |
Cross Feed | 5" | 6" | 7" | 8" | 11" | 13" |
Longitudinal | 13" | 14" | 20" | 22" | 25" | 27" |
Verticle Traverse | 12" | 13" | 13" | 17" | 22" | 26" |
Range Of Speeds | 30 to 600 | 45 to 550 | 65 to 345 | 40 to 875 | 40 to 875 | 30 to 675 |
H. P. Required | 1 H.P. | 1 H.P. | 1 H.P. | 2 H.P. | 3 H.P. | 5 H.P. |
Floor Space | 26"*14" | 28"*16" | 33"*22" | 39"*26" | 44"*25" | 49"*27" |
Standard Arbor | 1" | 1" | 1" | 1" | 1" | 1" |
No. Of Speeds | 3 | 6 | 6 | 9 | 9 | 9 |
Tapper Of Spindle | MT-2 | MT-2 | ISO 40 | ISO 40 | ISO 40 | ISO 40 |
Coolent Tank Water | 4 Gallons | 4 Gallons | 4 Gallons | 4 Gallons |