Our Products
The vertical steam sterilizer is used for sterilizing the loaded material under steam pressure of 15 to 18 PSI.
Electrically operated, single wall body made of quality stainless steel, Die pressed model. Lid of the unit consists of pressure gauge, safety valve (adjustable spring loaded) and pressure release valve. Pressure can be adjusted at any point between 10 to 18 PSI lid of the unit is tightened by bakelite insulated nut and bolt, provided a gasket made of silicon rubber. ISI quality immersion type heater is used for heating. Supplied with cord and plug, suitable to work on 220 V AC supply.
Double walled construction outer body made of galvanized steel, duly powder coated and inner chamber made with 304 quality S.S sheet. PUF insulated. temp: range 0C to 50C temp:Controlled by MCD (microprocessor controlled digital display) temp: controller, with inbuilt time delay for compressor ON. Without heating provision can be supplied on request. Fitted with AC TEFC motor stirrer for circulation. A drain valve is provided in the bottom. Refrigeration is obtained by hermetically sealed compressor with CFC free refrigerant. Ultra Cryostat Bath with different size, range and specifications can be supplied on request. Outer body with stainless steel 304 quality sheet can be fabricated on request. All the Refrigeration equipment should connect through a suitable and quality stabilizer, unless other wise the warranty will be invalid. |
Category No. | Inner dimensions of working space in cm | Capacity | Rating |
RUCB-01 | 20x20x25 | 10 ltr | 0.75 Kw |
RUCB-02 | 25x25x25 | 15 ltr | 1 Kw |
RUCB-03 | 30x30x25 | 25 ltr | 1.5 Kw |
RUCB-04 | 40X45X40 | 75 ltr | 2 K.w |
These are designed to use simultaneous primary biological and chemical containment. The recirculation of cabinet air through a second HEPA filter offers highest level of cleanliness.The Bio safety cabinets are made with good quality water proof marine plywood, outer surface are covered with laminated sheet, all the interior joints are sealed with good quality adhesives, and made the cabinet leak proof. All the internal surfaces are painted with synthetic rubber paint, made termite proof and weather resistant. |
Double walled construction, outer body made with M. S. sheet duly powder coated/painted. Inner chamber made of stainless steel 304 grade sheet of thick guage to withstand vacuum, provided with ceramic wool and glass wool insulation to avoid thermal loss, temperature range 500C. to 1500C. Temperature controlled by imported hydraulic thermostat accuracy +/- 2 0C digital temp: controller fitted model also available. Provided with valve and vacuum guage, see through door with toughened glass. Suitable to work on 220 V AC. supplied without vacuum pump. Maximum vacuum 760 mm of mercury.
Optional Accessories
PID temperature controller can be fitted with above equipment for better accuracy.
Micro-processor based programmable digital display temp. controller with temp.
Increment related to time with step for soak and ramp can be supplied.
Digital display vacuum indicator with vacuum transducer can be fitted with the unit.
Category No. | Chamber Size | Watts |
RVO-9 | 22.5 cms dia x 30cm depth | 600 |
RVO-12 | 30 cms dia x 38 cm depth | 800 |
RVO-15 | 38 cms dia x 45cm depth | 1000 |
RVO-18 | 45 cms dia x 60cm depth | 1200 |
This dual light object photo therapy unit is designed for treatment to lower the serum bilurubin level in the neo natal babies. Provided with Perspex cradle to get the light from the bottom as well as from the top.Light object consists of 4 or 6 tubes of 20 W, each object consists of 2 UV tubes and remaining are fluorescent tubes The UV tubes used are Philips Holland make to get the required wave length and heat .
Blood Bank Refrigerator is a versatile storage cabinet designed to meet various requirements in the storage of blood and such other blood related products. Double walled construction, outer body made with galvanized steel sheet, duly powder coated, inner chamber made with 304 quality stainless steel sheet, PUF insulation is provided to minimize the thermal loss. The outer door is provided with magnetic beading, lock, key and handle, provided with forced air draft system to maintain the inside temperature even and constant, inner drawers with clear plexiglass door. The entire unit is mounted on lockable caster wheels for ease of mobility. Equipped with CFC free compressor and refrigerant.