Our Products
ALUMNUME SCRAP TENSE
ALUMINUM SCRAP TAINT/TABOR
ALUMINUM SCRAP TALON
ALUMINUM SCRAP UBC
ALUMINUMSCRAP TENSE TILE
REMELTED ALUMINUM INGOTS SOFT/TENSE( TILE)
ALUMINUM TILE
ALUMINUM THROB
With its uniform high electrical conductivity, COPPER ROD ensures the highest possible efficiency in converting and transmitting electrical power and signals. The basis of these characteristic features of our rod is its high chemical purity, a result of usingcathodes that fulfill the LME Grade A standard.
Our rod has outstanding drawability, uniform recrystallization behavior and excellent surfaces, therefore fulfilling the requirements for use in advanced processing methods and applications.
ROYAL METALS COPPER ROD the preliminary product for sophisticated applications
ROYAL METALS COPPER RODis the ideal starting product for further processing and can be drawn or rolled into individual wires, braids, cable, enameled wire, flat wire and profiles.
The very good qualities of our rod ease our customers processing significantly. The uniformly high quality and purity mean that our rod is much sought after for demanding applications. Whether in electrical engineering, infrastructure, energy technology, automotive engineering or aviation:ROYAL METALS COPPERROD has gained an outstanding reputation in nearly all applications over the last decade.
In copper products, Royal Metals Trading Co. is dealing in,
1- Copper ingots 97%
2- Copper ingots 99%
3- Copper rod 99.99%
4-copper cathodes from primary raw material
for further information please contact us
Candy consists of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and wire not less than 1/16 of an inch thick, free of burnt wire which is brittle; but may include clean copper tubing. Hydraulically briquetted copper subject to agreement.
Shall consist of miscellaneous old zinc base diecastings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings.
All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery.
Copper wire with sheath removed, neither coated with other kinds of metal nor alloyed. It shall have a diameter of No. 16 B&S wire gauge, typically 1.6, or more. Conditions for light copper wire and briquet(hydraulically compacted material) shall be pursuant to the agreement between buyer and seller.
We can supply copper scrap/copper wire/copper rode/copper anode/copper slag/copper ore/copper ingots/copper scrap mill berry /copper birch cliff & pure copper cathode , etc which produced from Iranian mine for export to all over the world
Heavy Melting Steel (HMS) is iron scrap: recyclable steel or wrought iron. HMS consists of small pieces and is divided into two categories: HMS 1, which is not galvanized or blackened, and HMS 2.
Royal metals Group operates internationally and trades worldwide in used ferrous and non-ferrous materials. Our extensive experience, reliability and environmentally conscious approach make us a preferred supplier and business partner for many clients. Ferrous scrap is a valuable material. Royal Metals Group believes in sharing this value opportunity at a mutually profitable rate. Thanks to extensive experience with this material, our intimate knowledge of market prices and our lean organization, we are able to trade HMS at optimal prices.
ALUMNUME SCRAP TENSE
ALUMINUM SCRAP TAINT/TABOR
ALUMINUM SCRAP TALON
ALUMINUM SCRAP UBC
ALUMINUMSCRAP TENSE TILE
REMELTED ALUMINUM INGOTS SOFT/TENSE( TILE)
ALUMINUM TILE
ALUMINUM THROB
Steel pipes are made with metal alloys of iron and other metal like aluminum/ manganese etc. and has greater strength and durability than iron pipes. They are either seamless or welded along the length of the pipe and galvanized by coating it with a layer of zinc in a hot zinc bath or by an electroplating process. Zinc is non-toxic to humans and hence is an ideal metal for coating water pipes.
While steel pipes are durable, this material is difficult to work with because of the need for threading. However; it is still used for replacing or repairing existing steel pipelines. Steel is durable, but overtime, it is prone to corrosion from the inside as a result of zinc erosion. This occurs to the layer of zinc inside the pipe due to constant exposure to water, leading to buildup of corrosion byproducts. The average lifespan of steel pipes is about 50 years.
Stainless steel type 316 is a molybdenum bearing grade, giving it better corrosion and resistance properties. For this reason it is often selected for use in marine atmospheres.
It is highly resistant to sulphur compounds and resists chloride attack. As with any Stainless Steel, it is a strong, durable material which serves well for a variety of uses.
Lead wire resistance is put in series to gage resistance. The resistance changes under different temperatures and shifts sensitivity and zero balance, thereby considerably affecting measurement. Use a 3-wire cable under temperature-changing environment.
Brass is probably the most well-known of all copper alloys. Varying the composition of copper and zinc creates different types of material which are specifically geared to meeting particular demands. At Metalcenter Group, brass products are offered in a wide variety of alloys.
Shall consist of new, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, Iron, insulation and other non-metallic items
Backed by a rich industrial experience, we are engaged in offering a commendable array ofAluminium Talon.
We have marked a divergent position in the market by providing high qualityStainless Steel Billets. These steel billets are made with the latest tools & machinery along with finest steel. We examine these steel billets on quality factors for deliver a fault free range to customers end. Moreover, our customers can take these steel billets from us without compromising with the quality at very reasonable rates.
Aluminum UBC is a container for packaging made primarily of aluminum, such as common carbonated soda cans, juice cans, tea cans, or vegetable juice cans, sports drink cans, and beer cans.
These cans must be relatively, if not thoroughly, cleaned, dried and free from excessive dirt, liquid and other outthrows. Should be free of other scrap metals, foil, tin cans, plastic bottles, paper, glass, and other non-metallic items.
Aluminum beverage cans are highly recyclable, and can be reproduced continuously, have high reuse and economic value.
They are lightweight and can be squeezed in the hands, also have features of seamless can body, watertight, airtight, unbreakable, high pressure resistant, and light-tight, can protect the destruction of food nutrition from the harmful UV radiations.
After being surface treated, they can have better corrosion resistance, and can be suitable for outdoor use and some extreme circumstance use.
The basic material used for copper anodes is always high purity electrolytically refined cathode copper having a purity of more than 99, 98 %. Maximum impurities are given in the table alongside.
Our anodes are of excellent homogeneity, with grain sizes of approx. 0.1 - 0.5mm. Its fine grain structure ensures very even dissolution in the plating bath and thus a sound, uniformly dense cathode deposit.
In cooperation with our suppliers our quality has been developed as a special grade for use in acid copper sulphate baths. The material develops a typical adherent dark brown film during electrolysis, acting as a diaphragm and thus preventing the formation of sludge. The film is achieved by the addition of phosphorus, which is but one of the additives used.
Selection of the correct grade of anode depends on the precise specification.
In the mid 18thcentury, primary nickel was first isolated as a separate metal. Prior to this, it was found in copper mines and thought to be an unmeltable copper ore. Primary nickel can resist corrosion and maintains its physical and mechanical properties even when placed under extreme temperatures. When these properties were recognized, the development of primary nickel began. It was found that by combining primary nickel with steel, even in small quantities, the durability and strength of the steel increased significantly as did its resistance to corrosion. This partnership has remained and the production of stainless steel is now the single largest consumer of primary nickel today. This highly useful metal is also used in the production of many different metal alloys for specialized use.
NICKEL CATHODES: 4X4 50mmX50mm 60X60
PLATING CHIPS: nickel anode material for multipurpose nickel plating applications
NICKEL SULFATE and Nickel Chloride
ELECTROLYTIC STRIPS