Our Products
Our range of MS Channels including Industrial MS Channel, Construction MS Channel, Steel MS Channel are used in wide array of applications. These Channels are one of the most commonly used roll formed metal parts.
One of the most common types of Steel Channels is U-Channels and C-Channels. These are commonly used in various fabrication industries.
Designation | Depth of Section |
Width of Flange |
Thickness of Web |
Weight/Mtr | Sectional area |
Moduli Of |
|
H | b | t | w | a | Zxx | Zyy | |
(mm) | (mm) | (mm) | (kg) | (cm2) | (cm2) | (cm2) | |
ISMC 75 | 75 | 40 | 4.8 | 7.1 | 9.1 | 20.3 | 4.7 |
ISBC 100 | 100 | 50 | 5.0 | 9.6 | 12.2 | 37.3 | 7.5 |
ISMC 125 | 125 | 65 | 5.3 | 13.1 | 16.7 | 68.0 | 13.4 |
ISMC 150 | 150 | 75 | 5.7 | 16.8 | 21.3 | 105.5 | 19.4 |
ISMC 175 | 175 | 75 | 6.0 | 19.6 | 24.4 | 139.8 | 22.8 |
ISMC 200 | 200 | 75 | 6.2 | 22.3 | 28.5 | 181.0 | 26.4 |
ISMC 250 | 250 | 80 | 7.2 | 30.6 | 39.0 | 307.0 | 38.4 |
ISMC 300 | 300 | 90 | 7.8 | 36.3 | 46.3 | 428.0 | 47.1 |
ISMC 400 | 400 | 100 | 8.8 | 50.1 | 63.8 | 760.0 | 67.0 |
A Beam is a line structural that carries load primarily in bending. Beams are characterized by their profile (the shape of their cross - section), their length and their material. One of the most common types of steel beam is the I-Beam or Wide- flange Beam. A visibly sagging beam, through structurally safe, is unsightly and to be avoided. A stiffer beam produces less deflection Beam Provide economical floor and roof systems in applications requiring longclear spans and lighter weight systems. The major applications are Bridges, Flyovers, Pedestrians Walk Overs and Buildings
Designation | Depth of Section |
Width of Range |
Thickness of Web |
Weight / Mtr. | Sectional Area |
Moduli of Section |
|
h (mm) |
B (mm) |
t (mm) |
w (kg) |
a (cm2) |
Zxx (cm2) |
Zw (cm2) |
|
ISMB 100 | 100 | 60 | 4.5 | 11.5 | 14.6 | 51.5 | 10.9 |
ISMB 125 | 125 | 70 | 5.0 | 13.2 | 16.6 | 71.2 | 11.7 |
ISMB 150 | 150 | 75 | 5.0 | 15.0 | 19.0 | 95.7 | 13.1 |
ISMB 175 | 175 | 85 | 5.8 | 19.5 | 24.6 | 145.4 | 18.9 |
ISMB 200 | 200 | 100 | 5.7 | 25.9 | 32.3 | 223.5 | 30.0 |
ISMB 250 | 250 | 125 | 6.9 | 37.3 | 47.6 | 410.5 | 53.5 |
ISMB 300 | 300 | 140 | 7.7 | 46.0 | 58.6 | 599.0 | 69.5 |
ISMB 350 | 350 | 140 | 8.1 | 52.9 | 66.7 | 778.9 | 76.8 |
ISMB 400 | 400 | 140 | 8.9 | 61.5 | 78.5 | 1022.9 | 88.9 |
ISMB 450 | 450 | 150 | 9.4 | 72.4 | 92.3 | 1350.7 | 111.2 |
ISMB 500 | 500 | 180 | 10.2 | 86.9 | 110.7 | 1808.7 | 152.2 |
ISMB 600 | 600 | 210 | 12.0 | 123.0 | 156.2 | 3060.4 | 252.5 |
With years of experience and wide knowledge, we offer a wide range of CRC sheets and galvanized sheets to our clients. These sheets can be custom made in various sizes. Widely known for superior finish and durability, these are available at competitive prices. We also offer a premium range of CRC/ HR Sheets. These are extensively used for industries such as manufacturing vehicles, packing vessels and manufacturing container, also for products such as electronic machines, architectural windows and doors and hardware products. We also offer these as per our clients' requirements & specifications.
Galvanized Corrugated Sheets are available in thickness from 0.15 mm to 1.60 mm of all the major brands and company. Galvanized Sheets are mainly used in sheds of houses, Warehouses, Electrical equipment, automotive component etc.
Galvanized Corrugated Sheets are available in thickness from 0.15 mm to 1.60 mm of all the major brands and company. Galvanized Sheets are mainly used in sheds of houses, Warehouses, Electrical equipment, automotive component etc
We offer stainless steel sheets, which are of different grades. These range includes mild, carbon, brass, copper, aluminium steel sheets. Our stainless steel sheets, which are non magnetic and available in grades like 304, 304L, 316, 316L, 317, 309, 310, 310S and magnetic are of grade 410, 420, 430, 409, 409M
atrons can avail from us a gamut of Stainless Steel Plate. Developed by a team of adroit professionals as per industry laid norms, these plates are widely used in varied areas such as construction, ship manufacturing and engineering. All our products are rigorously examined by a quality auditing team to ensure their flawlessness, before the end delivery.
Attributes:
Ability to withstand adverse conditions.
Dimensionally accurate.
Longer life.
Steel bars fulfill a large number of uses. Because of its intrinsic strength, which stems from its circular cross section. Square bars are used in general engineering and automative products.
Bars come into varieties, both having identical measurements.
Bright shaft Round/Square Bars.
Mild Steel Round/Square Bars.
|
Recognised as a leading supplier of construction materials, we deal in Steel Flats, MS Black Flat Sections as well.
Flats are used in various versatile fabrication applications because of their intrinsic design. These are used in shutters, window panes, grills, bus bodies, etc.
Width |
3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 32 | 40 |
12 | 0.28 | 0.38 | 0.47 | 0.56 | |||||||||||||
16 | 0.38 | 0.50 | 0.63 | 0.75 | |||||||||||||
20 | 0.47 | 0.63 | 0.79 | 0.94 | |||||||||||||
25 | 0.60 | 0.80 | 1.00 | 1.20 | 1.4 | 1.6 | 1.8 | 2.0 | 2.4 | ||||||||
30 | 0.70 | 0.90 | 1.20 | 1.40 | 1.6 | 1.9 | 2.0 | 2.4 | 2.8 | 3.8 | |||||||
32 | 0.80 | 1.00 | 1.30 | 1.50 | 1.7 | 2.0 | 2.3 | 2.5 | 3.0 | 4.0 | |||||||
35 | 0.80 | 1.10 | 1.40 | 1.60 | 1.90 | 2.2 | 2.5 | 2.8 | 3.3 | 4.4 | 5.0 | 5.6 | |||||
40 | 0.90 | 1.30 | 1.60 | 1.90 | 2.2 | 2.5 | 2.8 | 3.1 | 3.8 | 4.7 | 5.0 | 5.6 | 6.3 | ||||
45 | 1.10 | 1.40 | 1.80 | 2.10 | 2.5 | 2.8 | 3.2 | 3.5 | 4.2 | 5.3 | 5.6 | 6.4 | 7.1 | 8.8 | |||
50 | 1.20 | 1.60 | 2.00 | 2.40 | 2.7 | 3.1 | 3.5 | 3.9 | 4.7 | 6.5 | 6.3 | 7.1 | 7.8 | 9.8 | |||
55 | 1.30 | 1.70 | 2.20 | 2.6 | 3.0 | 3.5 | 3.9 | 4.3 | 5.2 | 7.1 | 6.9 | 7.8 | 8.6 | 10.8 | |||
60 | 1.40 | 1.90 | 2.40 | 2.80 | 3.3 | 3.8 | 4.2 | 4.7 | 5.6 | - | 7.5 | 8.5 | 9.4 | 11.8 | |||
63 | - | - | - | 3.00 | 3.4 | 4.0 | 4.6 | 4.9 | 5.9 | 7.6 | 7.9 | 8.9 | 9.9 | 12.4 | 15.8 | ||
65 | - | - | - | 3.10 | 3.6 | 4.1 | 4.9 | 5.1 | 6.1 | - | 8.2 | 9.2 | 10.2 | 12,8 | 16.3 | ||
70 | - | - | - | 3.30 | - | 4.4 | 5.3 | 5.5 | 6.6 | - | 8.8 | 9.9 | 11.0 | 13.7 | 17.6 | ||
75 | - | - | - | 3.50 | - | 4.7 | - | 5.9 | 7.1 | - | 9.4 | 10.6 | 11.8 | 12.9 | 14.7 | 18.8 | |
80 | - | - | - | 3.80 | - | 5.0 | - | 6.3 | 7.5 | - | 10.0 | 11.3 | 12.6 | 13.8 | 15.7 | 20.1 | |
90 | - | - | - | 4.20 | - | 5.7 | - | 7.1 | 8.5 | - | 11.3 | 12.7 | 14.1 | 14.7 | 17.7 | 22.6 | |
100 | - | - | - | 4.70 | - | 6.3 | - | 7.8 | 9.4 | - | 12.6 | 14.1 | 15.7 | 17.3 | 19.6 | 25.1 | |
110 | - | - | - | 5.20 | - | 6.9 | - | 8.6 | 10.4 | - | 13.8 | 15.5 | 17.3 | 19.0 | 21.6 | 27.6 | |
120 | - | - | - | 5.70 | - | 7.5 | - | 9.4 | 11.3 | - | 15.1 | 17.0 | 18.8 | 20.7 | 23.6 | 30.1 | |
125 | - | - | - | 5.90 | - | 7.8 | - | 9.8 | 11.8 | - | 15.7 | 17.7 | 19.6 | 21.6 | 24.5 | 31.4 | |
130 | - | - | - | - | - | - | - | 10.2 | 12.2 | - | 16.3 | 18.4 | 20.4 | - | 25.5 | 32.7 | 40.8 |
140 | - | - | - | - | - | - | - | 11.0 | 13.2 | - | 17.6 | 19.8 | 22.0 | - | 27.5 | 35.2 | |
150 | - | - | - | - | - | - | - | 11.8 | 14.1 | - | 18.8 | 21.2 | 23.6 | - | 29.5 | 37.7 | 47.1 |
160 | - | - | - | - | - | - | - | 12.6 | 15.1 | - | 20.1 | 22.6 | 25.1 | - | 31.4 | 43.2 | |
180 | - | - | - | - | - | - | - | 14.1 | 17.0 | - | 22.6 | 25.6 | 28.3 | - | 35.3 | 45.2 | |
200RE | - | - | - | - | - | - | - | 15.7 | 18.8 | - | 25.1 | 28.3 | 31.4 | - | 39.2 | 50.2 | 62.8 |
220RE | - | - | - | -- | - | - | - | 17.3 | 22.3 | - | 27.6 | 31.1 | 34.5 | - | 43.2 | - | - |
250RE | - | - | - | - | - | - | - | 19.6 | 23.6 | - | 31.4 | 35.3 | 39.2 | - | 49.1 | - | - |
300RE | - | - | - | -- | - | - | - | - | 28.3 | - | 37.7 | 42.4 | 47.4 | - | 58.9 | - | - |
400RE | - | - | - | - | - | - | - | - | - | - | 50.2 | 56.5 | 62.8 | - | 78.5 | - | - |
TMT Bars (Thermo Mechanically Treated) Steel, can be described as a new-generation-high-strength steel having superior properties such a sweldalibility, strength, ductility and tensility, which meet the highest international quality standards. One of the most common types of TMT Construction is used for home and building construction. The production of quality TMT Bar depends on three major factors - quality raw materials, a properly designed and automated mill, and a well-designed quenching and temping technology. All bars must be purchased based on the properties of yield strength, tensile strength and elongation values.
|
Steel bars fulfill a large number of uses. Because of its intrinsic strength, which stems from its circular cross section. Round bars offer universal applications where Omni Directional strength is of premium , especially in the re-inforcement of concrete.
Bars come into varieties, both having identical measurements.Bright shaft Round/Square Bars.Mild Steel Round/Square Bars.
ROUND BARS |
|||
Diametre (d) |
Weight/Metre (w) |
Sectional Area (a) |
Per metre (p) |
5.0 | 0.15 | 0.20 | 1.57 |
5.5 | 0.19 | 0.24 | 1.73 |
6.0 | 0.22 | 0.28 | 1.88 |
7.0 | 0.3 | 0.38 | 2.20 |
8.0 | 0.39 | 0.50 | 2.51 |
9.0 | 0.5 | 0.64 | 2.83 |
10.0 | 0.62 | 0.79 | 3.14 |
11.0 | 0.75 | 0.95 | 3.46 |
12.0 | 0.89 | 1.13 | 3.77 |
14.0 | 1.12 | 1.54 | 4.40 |
16.0 | 1.58 | 201 | 5.03 |
18.0 | 2.00 | 2.54 | 5.65 |
20.0 | 2.47 | 3.14 | 6.28 |
22.0 | 2.98 | 3.80 | 6.91 |
25.0 | 3.85 | 4.91 | 7.85 |
28.0 | 4.83 | 6.16 | 8.80 |
32.0 | 6.31 | 8.04 | 10.05 |
36.0 | 7.99 | 10.18 | 11.31 |
40.0 | 9.86 | 12.57 | 12.57 |
45.0 | 12.49 | 15.90 | 14.14 |
50.0 | 15.41 | 19.64 | 17.59 |
56.0 | 19.34 | 24.63 | 17.59 |
63.0 | 24.47 | 31.17 | 19.79 |
71.0 | 31.08 | 39.59 | 22.31 |
80.0 | 39.46 | 50.27 | 25.13 |
90.0 | 49.94 | 63.62 | 28.27 |
100.0 | 61.66 | 78.54 | 31.42 |
110.0 | 74.6 | 95.03 | 34.56 |
125.0 | 96.34 | 112.72 | 39.27 |
140.0 | 120.84 | 153.94 | 43.98 |
160.0 | 157.84 | 201.06 | 50.27 |
180.0 | 199.76 | 254.47 | 56.55 |
200.0 | 246.62 | 314.16 | 62.83 |
MS Angle are one of the most commonly used steel structure in the Construction Industry. The basic shape of the Angle lends it many particle uses. There are basically 2 types of Angle:
Equal AngleUnequal Angle
Angle are available as per Indian and International specifications confirming to extremely close dimensional tolerances and accurate mechanical properties
Size | Thickness | Sectional Area |
Weight/ Meter |
Centre of Gravity |
Moments of Inertia |
A x B (mm x mm) |
T (mm) |
a (cm2) |
w (kg) |
Cxx=Cyy (cm) |
Ixx=Iyy (cm4) |
20x20 | 3.00 | 1.12 | 0.9 | 0.59 | 0.4 |
- | 4.00 | 1.45 | 1.10 | 0.63 | 0.50 |
25x25 | 3.00 | 1.41 | 1.10 | 0.71 | 0.80 |
30x30 | 4.00 5.00 3.00 4.00 |
1.84 2.25 1.73 2.26 |
1.40 1.80 1.40 1.80 |
0.75 0.79 0.83 0.87 |
1.00 1.20 1.40 1.80 |
5.00 | 2.77 | 2.20 | 0.92 | 2.10 | |
35x35 | 3.00 | 2.03 | 1.60 | 0.95 | 2.30 |
4.00 | 2.66 | 2.10 | 1.00 | 2.90 | |
5.00 | 3,27 | 2.60 | 1.04 | 3.50 | |
6.00 | 3.86 | 3.00 | 1.08 | 4.10 | |
40x40 | 3.00 | 2.34 | 1.80 | 1.08 | 3.40 |
4.00 | 3.07 | 2.40 | 1.12 | 4.50 | |
5.00 6.00 |
3.78 4.47 |
3.00 3.50 |
1.16 1.20 |
5.40 6.30 |
|
45x45 | 3.00 4.00 5.00 6.00 |
2.64 3.47 4.28 5.07 |
2.10 2.70 3.40 4.00 |
1.20 1.25 1.29 1.33 |
5.00 6.50 7.90 9.20 |
50x50 | 3.00 | 2.95 | 2.30 | 1.32 | 6.90 |
4.00 | 3.88 | 3.00 | 1.37 | 9.10 | |
5.00 | 4.79 | 3.80 | 1.41 | 11.00 | |
55x55 | 6.00 5.00 |
5.68 5.27 |
4.50 4.10 |
1.45 1.53 |
12.90 14.70 |
6.00 8.00 |
6.26 8.18 |
4.90 6.40 |
1.57 1.65 |
17.30 22.00 |
|
60x60 | 10.00 5.00 |
10.20 5.75 |
7.90 4.50 |
1.72 1.65 |
26.30 19.20 |
6.00 | 6.84 | 5.40 | 1.69 | 22.60 | |
8.00 | 8.96 | 7.00 | 1.77 | 29.00 | |
65x65 | 10.00 5.00 |
11.00 6.25 |
8.60 4.90 |
1.85 1.77 |
34.80 24.70 |
6.00 | 7.44 | 5.80 | 1.81 | 29.10 | |
8.00 | 9.76 |
7.70 |
1.89 | 37.40 | |
10.00 | 12.00 | 9.40 | 1.97 | 45.00 | |
75x75 | 5.00 | 7.27 | 5.70 | 2.02 | 38.70 |
6.00 | 8.66 | 6.80 | 2.06 | 45.70 | |
8.00 | 11.38 | 8.90 | 2.14 | 59.00 | |
10.00 | 14..02 | 11.00 | 2.22 | 711.40 | |
80x80 | 6.00 | 9.29 | 7.30 | 2.18 | 56.00 |
8.00 | 12.21 | 9.60 | 2.27 | 72.50 | |
10.00 | 15.05 | 11.80 | 2.34 | 87.70 | |
12.00 | 17.81 | 14.00 | 2.42 | 101.90 | |
90x90 | 6.00 | 10.47 | 8.20 | 2.42 | 80.10 |
8.00 | 13.79 | 10.80 | 2.51 | 104.20 | |
10.00 | 10.03 | 14.90 | 2.84 | 177.00 | |
12.00 | 22.59 | 17.70 | 2.92 | 207.00 | |
110x110 | 8.00 10.00 |
17.02 21.06 |
13.40 16.50 |
3.00 3.08 |
195.00 238.40 |
12.00 | 25.02 | 19.60 | 3.16 | 279.60 | |
130x130 | 8.00 | 20.22 | 15.90 | 3.50 | 328.30 |
10.00 | 25.06 | 19.70 | 3.58 | 402.70 | |
12.00 | 29.82 | 23.40 | 3.66 | 473.80 | |
16.00 | 36.81 | 28.90 | 3.78 | 574.60 | |
150x150 | 10.00 | 29.03 | 22.80 | 4.06 | 622.40 |
12.00 | 34.59 | 27.20 | 4.14 | 735.40 | |
16.00 20.00 |
42.78 50.79 |
35.80 39.90 |
4.26 4.38 |
896.80 1084.90 |
|
200x200 | 12.00 | 46.61 | 36.60 | 5.36 | 1788.90 |
16.00 | 57.80 | 48.50 | 5.49 | 2197.70 | |
20.00 | 68.81 | 60.00 | 5.61 | 2588.70 |
RSJ Poles are mainly used by Govt. Sector and Industrial Sector for street lighting and power transmission. These pole are manufacture on the most modern and sophisticated machinery and excellent team of highly experienced and qualified personals.
MB | MB | SC | UC | |||
1. | Designation (DxB) (mm xmm) |
116x100 | 125x70 | 175x85 | 152x152 | 152x152 |
2. | Length of joist-meter with +100 mm tolerance | 10m/11m/13m | 8m / 9m | 9m | 11m / 13m | 11m / 13m |
3. | Weight (Kg./M) | 23.0 | 13.3 | 19.6 | 37.1 | 37.0 |
4. | Sectional area (A) (sq.cm.) | 29.3 | 17.0 | 25.0 | 47.4 | 47.11 |
5. | Depth of Section (D) (mm) | 116 | 125 | 175 | 152 | 161.8 |
6. | Width of flance (B) (mm) | 100 | 70 | 85 | 152 | 154.4 |
7. | Thickness of flance (TF) (mm) | 10 | 8 | 9 | 11.9 | 11.5 |
8. | Thichness of Web (Tw) (mm) | 8.5 | 5 | 5.8 | 7.9 | 8.0 |
9. | Radius of fillet or root (RI) (mm) | 15 | 9 | 10 | 11.7 | 7.6 |
10. | Radius of tow (R2) (mm) | 3 | 4.5 | 5 | 3 | - |
11. | Moment of Intertia (i) I xx (cm4) (ii) I yy (cm4) |
643.8 143.5 |
445 38.5 |
1260 76.7 |
1970 700 |
2210 706.2 |
12. | Radius of Gyration GR xx (cm) | 4.69 | 5.16 | 7.13 | 6.45 | 6.85 |
13. | Modulus of section (i) Z xx (cm3) (ii) Z xx (cm3) |
111 28.7 |
71.2 11 |
144 18 |
259 91.90 |
273.2 91.48 |
14. | Tolerance in dimensions plus/minus | -------------------------As per IS: 1852---------------------------- |
With the aid of our sincere professionals, we are providing a gamut of Stainless Steel Coils. The products we are offering are extensively used to manufacture bridges, construction structures, freeway fences and pipes. These dimensionally accurate coils are offered by us in varied sizes and dimensions to suit the diverse requirements of the patrons.
MS Pipeis largely used for various purposes like irrigation, cold storage and architectural purpose. These products are fabricated by using best grade raw material and latest manufacturing techniques.
MS Pipesare available of IS: 1161, 1230, 3589 & 9295.
Nominal Bore | Outside Diameter |
Wall Thickness | Weight | ||
(mm) | (mm) |
Class | (mm) |
kg/Mtr |
Mtrs/Ton |
15 | 21.3 | Light | 2.0 | 0.947 | 1056 |
Medium | 2.6 | 1.210 | 826 | ||
Heavy | 3.2 | 1.440 | 694 | ||
20 | 26.9 | Light | 2.3 | 1.380 | 725 |
Medium | 2.6 | 1.560 | 641 | ||
Heavy | 3.2 | 1.870 | 535 | ||
25 | 33.7 | Light | 2.6 | 1.980 | 505 |
Medium | 3.2 | 2.140 | 415 | ||
Heavy | 4.0 | 2.930 | 341 | ||
32 | 42.4 | Light | 2.6 | 2.540 | 394 |
Medium | 3.2 | 3.100 | 323 | ||
Heavy | 4.0 | 3.790 | 264 | ||
40 | 48.3 | Light | 2.9 | 3.230 | 310 |
Medium | 3.2 | 3.560 | 281 | ||
Heavy | 4.0 | 4.370 | 229 | ||
50 | 60.3 | Light | 2.9 | 4.080 | 245 |
Medium | 3.6 | 5.030 | 199 | ||
Heavy | 4.5 | 6.190 | 162 | ||
65 | 76.1 | Light | 3.2 | 5.710 | 175 |
Medium | 3.6 | 6.420 | 156 | ||
Heavy | 4.5 | 7.930 | 126 | ||
80 | 88.9 | Light | 3.2 | 6.720 | 149 |
Medium | 4.0 | 8.360 | 120 | ||
Heavy | 4.8 | 9.900 | 101 | ||
90 | 101.6 | Light | 3.6 | 8.700 | 115 |
Medium | 4.0 | 9.630 | 104 | ||
Heavy | 4.8 | 11.50 | 87 | ||
100 | 114.3 | Light | 3.6 | 9.750 | 103 |
Medium | 4.5 | 12.20 | 82 | ||
Heavy | 5.4 | 14.50 | 69 | ||
110 | 127.0 | Light | 4.5 | 13.60 | 74 |
Medium | 4.8 | 14.50 | 69 | ||
Heavy | 5.4 | 16.20 | 62 | ||
125 | 139.7 | Light | 4.5 | 15.00 | 67 |
Medium | 4.8 | 15.90 | 63 | ||
Heavy | 5.4 | 17.90 | 56 | ||
135 | 152.4 | Light | 4.5 | 16.40 | 61 |
Medium | 4.8 | 17.50 | 57 | ||
Heavy | 5.4 | 19.60 | 51 | ||
150 | 165.1 | Light | 4.5 | 17.80 | 56 |
Medium | 4.8 | 18.90 | 53 | ||
Heavy | 5.4 | 21.30 | 47 | ||
150 | 168.3 | Light | 4.5 | 18.20 | 55 |
Medium | 4.8 | 19.40 | 52 | ||
Heavy 1 | 5.4 | 21.70 | 46 | ||
Heavy 2 | 6.3 | 25.20 | 40 | ||
175 | 193.7 | Light | 4.8 | 22.40 | 45 |
Medium | 5.4 | 25.10 | 40 | ||
Heavy | 5.9 | 27.30 | 37 | ||
200 | 219.1 | Light | 4.8 | 25.40 | 39 |
Medium | 5.6 | 29.50 | 34 |