Runwel pumps

Rakhial, Ahmedabad, Gujarat

Application RKB pump is used for boiler feed water, condensate handling, water works, sprinkling & irrigation installations, fire fighting, for generation of high pressure water for hydraulic press, cooling & circulation water, etc. Design Horizontal multistage pump with centrifugal close vein impeller. The stages are sealed off against each other by ‘O’ Rings and clamped together by tie rods. Operating Data Pump Size  – DN 32 Capacity  – up to 18 m 3 /hr Head  – up to 350 m Operating Pressure  – up to 33 bar Temperature  – up to + 140° C RPM  – up to 2900 rpm Material Suction Casing  – C.I. Gr. Discharge Casing  – C.I. Gr. Stage Casing  – C.I. Gr. Impeller  – C.I. Gr. / Bronze / SS Shaft  – C 45 / AISI 410 Shaft Protection Sleeve  – C.I. Gr. / AISI 410 Bearing Housing  – C.I. Gr.

Application RKB pump is used for boiler feed water, condensate handling, water works, sprinkling & irrigation installations, fire fighting, for generation of high pressure water for hydraulic press, cooling & circulation water, etc. Design Horizontal multistage pump with centrifugal close vein impeller. The stages are sealed off against each other by ‘O’ Rings and clamped together by tie rods. Operating Data Pump Size  – DN 32 Capacity  – up to 18 m 3 /hr Head  – up to 350 m Operating Pressure  – up to 33 bar Temperature  – up to + 140° C RPM  – up to 2900 rpm Material Suction Casing  – C.I. Gr. Discharge Casing  – C.I. Gr. Stage Casing  – C.I. Gr. Impeller  – C.I. Gr. / Bronze / SS Shaft  – C 45 / AISI 410 Shaft Protection Sleeve  – C.I. Gr. / AISI 410 Bearing Housing  – C.I. Gr.

  Application KMD pumps are used when one or more of the following are required: Self priming Solid / Polluted handling Resistance to abrasion. KMD pumps can handle liquids up to a Viscosity of about 50 mm 2 /s (cst)They can be used for waste treatment, transfer of clean or dirty liquids, Pumping out settled sludge, dosing neutralizing liquids, filtration, pumping out settled sludge, pumping polluted corrosive waste water containing sand, mud or solids in suspension, effluent treatment plant, acid of alkali liquids, clean or dirty low viscosity petroleum products, solvents, milk or lime suspicion soda, washing, cooling, smoke scrubbing, de-watering construction sites, food waste, water filtration, loading or unloading sanitary duty, cleaning bilges, liquid manure oxygenation, etc. Features Simple construction having back-pullout design. Easy inspection of impeller. Quick self priming action without foot valve up to 7.5m. Pumping large size diameter solid in suspension. Available in mono block & bare shaft design for v-belt / couple set version. Various options for material of construction. Option for separate volute design and replaceable ware plate gland plate for quick, low cost & easy maintenance. Standard model having SS 410 sleeve, wear plate screw, impeller nut, C40 shaft, rest in FG200 C.I.

Application It can be used for Hot Water Transfers, Thermic Fluid Boilers, Hot Oil Transfers, Chemical Industries, Petro Chemical Industries, Jet Dyeing, Refineries, Sugar Mills, Paper & Pulp Industries, Laminate Industries, Seawater desalination plants, etc. Design Back pull-out construction, Horizontal, Foot mounted, Center mounted, Single stage, End suction Top centerline discharge. Operating Data Pump Size  – DN 32 to 100 Capacity  – up to 100 m 3 /hr Head  – up to 150 m Temperature  – up to + 350° C RPM  – up to 2900 rpm Material Casing  – C.I. Gr., CS, SS 304, SS 316 Impeller  – C.I. Gr., CS, SS 304, SS 316 Shaft  – EN9, SS 304, SS 316 Shaft Protection Sleeve  – MS with Hardcrome, SS 304, SS 316 Gland Stuffing Box  – C.I. Gr., CS, SS 304, SS 316 Bearing housing  – C.I. Gr.