Write a Review
Our Products
Our product range contains a wide range of Glycerin Filled Pressure Gauge, Macleod Gauge, Weather Proof Pressure Gauge, Diaphragm Sealed Pressure Gauges and Schaffer AND Low Pressure Gauge
| Dial Size :63mm, 100mm, 150mm & 250mm. |
| Accuracy :1% of full scale. |
| Case & Bezel (IP-65) :SS 304, Crimp Type / Snap Action Bayonet type & for 250mm Die cast aluminum. |
| Movement :SS 304 / Brass (63 mm) |
| Pressure Element :SS 316 ( 70 bar C Type / > 70 bar Coil Type ). |
| Socket :SS 304 / SS 316 / BRASS (63mm). |
| Dial :Aluminum white painted with 270 degree black scale marking. |
| Pointer :Al. / Brass with black finish. |
| Window :Acrylic / Safety glass. |
| Blow Out Protection :On top at 0.6 Kg/cm2. |
| Over Load Protection :125% of f.s.d. for 150 Kg/cm2 115% of f.s.d. for > 150 Kg/cm2. |
| Joints :Argon arc welded / Brass silver brazed. |
| Mounting :Stem (Bottom), Surface, Panel Mounting, Flush Panel ( Bracket Type). |
| Connection : / 3/8 / BSP / NPT. |
| Scale Range :Vacuum, Compound & Pressure up to 1400 kg/cm2. |
| OPTIONAL FEATURES S S 316 Case & Bezel available on request. Ammonia (NH3), Oxygen(o2), Freon Scale available on request. Eco Model in M.S. Case & S S Case available on request. APPLICATION Air Compressor, Hydraulic Presses, Pumps, Industrial Power Plants, Marine engines, Pipelines and Transmission Stations where Vibration & Pulsation are destructive factors. |
The Mcleod gauge is a scientific instrument used to measure very low Pressure , down to 10-6mbar.
The Mcleod gauge is used to measure vacuum by measuring the hight of a column of mercury supported by the gas whose pressure is to be measured , when this gas is trapped and compressed into a capillary tube
| Dial Size :63mm, 100mm, 150mm & 250mm. |
| Accuracy :1% of full scale. |
| Case & Bezel (IP-65) :SS 304 Snap Action Bayonet type & for 250mm Die cast aluminum. |
| Movement :SS 304 |
| Pressure Element :SS 316 ( 70 bar 'C' Type / > 70 bar Coil Type ). |
| Socket :SS 304 / SS316 |
| Dial :Aluminum white painted with 270 degree black scale marking. |
| Pointer :Al. / Brass, Zero adjustment / Micro Zero Adjustment pointer. |
| Window :Toughened / Safety glass. |
| Blow Out Protection :63mm on Top & 100 & 150mm on back side at 0.6 Kg/cm . |
| Over Load Protection :125% of f.s.d. for 150 Kg/cm2/115% of f.s.d. for > 150 Kg/cm2. |
| Joints :Argon arc welded. |
| Mounting :Stem (Bottom), Surface, Panel Mounting, Flush Panel ( Bracket Type). |
| Connection :" / 3/8" / " BSP / NPT. |
| Scale Range :Vacuum, Compound & Pressure up to 1400 kg/cm . |
| OPTIONAL FEATURES S S 316 Case & Bezel available on request. Ammonia (NH ), Oxygen(O ), Freon Scale available on request. 3 2 Eco Model in M.S. & SS Case available on request. APPLICATION Chemical & Petrochemicals, Power generation, Pollution Control Equipment, Oil exploration and any other applicatio |
| Dial Size :63mm, 100mm, 150mm. |
| Accuracy :1% of full scale. |
| Case & Bezel (IP-65) :SS 304 Snap Action Bayonet type / Crimp type. |
| Movement :SS 304 |
| Pressure Element :SS 316 ( 70 bar C Type / > 70 bar Coil Type ). |
| Socket :SS 316 |
| Dial :Aluminum white painted with 270 degree black scale marking. |
| Pointer :Al. / Brass, Zero adjustment / Micro Zero Adjustment pointer. |
| Window :Acrylic / Toughened / Safety glass. |
| Blow Out Protection :On Top / On back side at 0.6 Kg/cm . |
| Over Load Protection :125% of f.s.d. for 150 Kg/cm115% of f.s.d. for > 150 Kg/cm |
| Joints :Argon arc welded. |
| Mounting :Stem (Bottom), Surface, Panel Mounting, Surface with capillary extension. |
| Scale Range :Vacuum, Compound & Pressure up to 420 kg/cm .Sealed Unit |
| Upper Chamber Material :SS 304 |
| Diaphragm Material :SS 316L / MONEL / HASTALLOY C / TANTALUM or any other material. Teflon Coating can be provided if required. |
| Lower Chamber :SS 304 / SS 316 / MONEL or any other material(Threaded / Flange type) |
| Filling Fluid :Silicon Oil or suitable liquid as desired by the user |
| APPLICATION Chemical, Petrochemical, Pulp & Paper, Food Processing industries, in water & sewage treatment plants and in electric power plant etc OPTIONAL FEATURES Different type of seals & connection available like :-Different threaded type, Open Flange Type, Flush welded diaphragm type, Sandwitch flange (cell) type, Extended welded diaphragm type, Capillary extension type.SMS & TC Connection for food, Biochemical & pharmaceutical industries.Homogenizer flange ( Round or Square) Type.Special Connection for Pulp & Paper Industries.Eco Model available on request. |
| CONSTRUCTION FEATURES |
| Dial Size :100mm & 150mm. |
| Accuracy :1% of full scale. |
| Case & Bezel (IP-65) :SS 304 Snap Action Bayonet type. |
| Movement :Brass / SS 304. |
| Pressure Element :SS 316 Diaphragm / Compact capsule. |
| Dial :Aluminum white painted with 270 degree black scale marking. |
| Pointer :Al. / Brass, Zero adjustment / Micro Zero Adjustment pointer. |
| Window :Toughened / Safety glass. |
| Over Load Protection :125% of f.s.d. for 150 Kg/cm /115% of f.s.d. for > 150 Kg/cm . |
| Mounting :Direct Bottom entry. |
| Scale Range :For Schaffer Diaphragm: 760mmHg Vacuum, Compound, 0.6 to 21 Kg/cm . |
| For Low Pressure Diaphragm :250mmWc to 6000 mmWc. |
| For Compact Capsule :250mmWc to 6000mmWc.Upper Chamber |
| Material :SS 304 / Carbon Steel Powder Coated. |
| Diaphragm Material :Brass / SS 316, Teflon Coating can provided if required. |
| Lower Chamber :SS 304 / SS 316, PTFE Lining provide if required.( Threaded / Flange type ). |
| OPTIONAL FEATURES Economic M.S. Model available on request.Flanged connection available on request. |
| APPLICATION Medical & Vacuum Technology, environment &heating engineering, level indication & filter monitoring. |
| CONSTRUCTION FEATURES |
| Dial Size :63mm, 100mm & 150mm. |
| Accuracy :+ 1.6% of full scale. |
| Case & Bezel (IP-65) :SS 304 Snap Action Bayonet type & SS 304 Press Fit Type. |
| Temp. Element :Wounded coil of Bimetal. |
| Stem & Bulb :SS 304, SS 316 ( 6mm, 8mm, 10mm & 12mm ). |
| Stem Length :SS 304, SS 316 ( up to 300mm ). |
| Dial :Aluminum white painted with 270 degree black scale marking . |
| Pointer :Brass with black finish. |
| Window :Plain Glass / Toughened / Safety glass. |
| Joints :Argon arc welded. |
| Mounting :Stem (Bottom), Back & Every angle. |
| Connection :" / 3/8" / " BSP / NPT ( Fix or Adjustable ). |
| Scale Range :-30 to 50 to 500 C or equivalent in F |
| BIMETAL TEMP. GAUGES OPTIONAL FEATURES Dual scale C & F available on request. Every angle mounting available on request. Extra stem length on request, TC Connection on request. BIMETAL TEMP. GAUGES APPLICATION Domestic & industrial heating system, hot water boiler, power plant, food & beverage industries, pharmaceutical industry etc. |
| Dial Size: 100mm & 150mm. |
| Accuracy :+ 1% of full scale. |
| Case & Bezel (IP-65) :SS 304 Snap Action Bayonet type. |
| Temp. Element :Mercury / Gas actuated. |
| Stem & Bulb :SS 316 |
| Stem & Bulb Dia. :6mm, 8mm, 10mm & 12mm. |
| Stem Length :up to 300mm. |
| Capillary Material :M S / S S 316 Micro bore. |
| Capillary Protection :SS 304 Tubing, PVC, SS Armored. |
| Dial :Aluminum white painted with 270 degree black scale marking. |
| Pointer :Al. / Brass, Zero Adjustment / Micro Zero Adjustment. |
| Window :Toughened / Safety glass. |
| Joints :Argon arc welded. |
| Mounting :Stem (Bottom), Back & Surface with capillary extension. |
| Connection :" / 3/8" / " BSP / NPT ( Adjustable ). |
| Scale Range :-30 to 50 C to 650 C or equivalent in F |
| OPTIONAL FEATURES Anti vibration fitting, Dual scale C & F available on request.Liquid filled case with Glycerin or Silicon on request.Alarm contact type & Capillary extension on request. |
| APPLICATION Pharmaceutical industries, Chemicals & Petrochemicals, Fertilizers & Refineries, Filters for liquid control systems and all Process Industries. |
| lection ofKg/Cm2, Bar, PSI, KPa, mm WC, |
| Engineering Units :mm Hg, In WC, In Hg |
| Enclosure :Aluminium Anodised, Light Weight / SS 304 |
| Display :8 x 2 Dot matrix display, shows Pressure, unit & low batt. |
| Media :It works with any media that will not adversely affect SS 316 |
| Accuracy : 0.15% & 0.5% or better of full scale at calibrated temperature |
| Power :Standard 9 V 150 mAh, Ni MH with charger or 230 VAC, 50 Hz |
| Connection :1/4 BSP Male (others on request) |
| Over pressure :130% of specified range |
| Temperature :Storage : -40 to 85C |
| Operating :-40 to 85C |
| 4-20 mA :Available (Optional) |
| SPDT Relay output :Available (Optional) Provides 2 adjustable SPDT relay |
| Diaphragm seals :Various size, style and MOC available |
Rakesh Verma (Rushi Enterprises)
222, Vidyanagar Soc, Odhav, Ahmedabad, Gujarat, India
Share us via
