We are manufacturer of good quality Cat 9 Self Setting Cement In 50 Kgs Bag As Per Is 9743 :1990. Physical Property: Applied density: 1200 to 1250 kgm3 Box density: 750 to 800 kgm3 Wet covering capacity: Approx. 62m2 per m.t 12 mm thicknesses, 125m2 per mt at 6mm thickness. Resistance to impact: 20-24 mm Resistance to Compression: 4500-5000 KNm2 Flexural strength: 2800-3100 KNm2 Shrinkage: 0.18% maximum Initial Set (setting time) Within 24 hours Final Set: 20-25 days after laying Drying time: 48 hrs. under normal condition upto 72hrs under cold humid conditions. Temperature limit: 700 C for continuous service conditions. ApplicationCAT-9 cement is suitable for application on thermal insulation of various types and sets without application of heat to produce a hard surface layer resistant to weather impact and abrasion damage. CAT-9 self- setting cement

We are engaged in providing Power Plant Equipments. These are manufactured in compliance with the set industry standards to ensure optimum durability in the end product. Our range is known for sturdy construction, high performance and corrosion resistant. contact us on 9131659337

SAAR REFRACTORIES AND POWER is a leader in providing thermal, acoustic and personnel protection insulation systems for rotating equipment applications. Our scope of supply includes fabric insulation blankets, metal foil insulation blankets, insulation-lined composite products, and sheet metal insulation blankets and heat shields.contact us on 9131659337

Air pollution control equipment is a vital component of industrial processes that cannot be neglected. This equipment removes Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) from the air, like sulfuric gases, fumes, odors and vapors. Environmental Protection Agency (EPA) regulations, such as the Clean Air Act and the National Ambient Air Quality Standards (NAAQS), limit the type and quantity of VOCs and HAPs industrial manufacturing facilities may emit during processing. Its important to respect these regulations not only from a business standpoint, but from the perspective of community health and ethics. VOCs and HAPs pose a threat to the environment, local ecosystems and human health. They result, for example, in acid rain, smog, carbon emissions and overall climate change. Furthermore, 188 regulated HAPs have been definitely linked or are suspected to be linked to cancer, birth defects and other serious problems.

We offers competitive turbine parts solutions for addressing reliability, life extension and capacity demands by providing retrofit and turbine part solutions for large steam turbine generators. Load demand, financial pressures and aging steam turbine generators have created the need to extend longevity and reliability. 1) Turbine Packing & Seals2)Turbine Bearings3)Generator Parts - Electric Utility4)Turbine Valves & Components5)Turbine Hardware6)Turbine FastenersCombustion DLN 2.6 Gas FuelCompressor Flared Compressor with P-cut R-0Generator 7FH2 Complete Generator including EX 2100 ExciterControls PEECC Mark VIAuxiliaries All auxiliary skids and componentsStorage Main unit stored indoors, climate controlled. All components available for viewing.

We offer high quality new and used portable cabins, portable offices, modular portable buildings, shipping containers, site offices and toilet blocks for sale and hire, available in a wide range of styles and sizes to meet your specific requirements.Our aim is to create high levels of customer satisfaction by providing our customers with the lowest cost mobile and on-site storage solutions available both new and used portable offices and buildings.

An evaporative cooling system offers effective cooling by combining water evaporation, which is a natural process, with a reliable and simple air-moving system. Air from the outside is pulled via moist pads where evaporation cools it and is circulated in a building or a house with the help of a large blower. During this process, the temperature of the air in the outside gets reduced as much as thirty degrees.Target equipments evaporator cooling system division manufacturing includes of Evaporative cooling performance is dynamic due to changes in external temperature and humidity level. Under typical operating conditions, an evaporative cooler will nearly always deliver air cooler than 27C (80F). A typical residential 'swamp cooler' in good working order should cool air to within 34 of the wet-bulb temperature.They are prefabricated compact units available up to 1, 50, 000 MHr capacities.AdvantagesLess expensive to installLess expensive to operateEase of MaintenanceVentilation airApplications:Generators roomsGas turbine intakesIndustrial cooling for shop floorsSpot cooling for hotspotComfort coolingCommercial agriculture

As an Independent Service Provider, SAAR REFRACTORIES AND POWER services to the all types of the power generation industry.Please contact us on 9131659337.

Our lrb mattresses are flexible rock fiber mattresses, stitched with wire mesh and manufactured from stable rock fibers bonded with a minimum quantity of thermosetting resin binder. Our lrb mattresses are light weight, strong, resilient, easy to handle and cut to suit intricate shapes. Facing typesour lrb mattresses are available with a galvanized steel or stainless steel hexagonal wire netting (mesh) on one or two sides.Working temperatureup to 750 cfire safety performanceour lrb mattresses are non-combustible when tested in accordance with is 3144, bs 476 (part 4), iso 1182 and astm e136 and have the following fire safety rating achievements:class I surface spread of flame in accordance to bs 476 (part 7)class 0 in accordance to the bs 476 (part 6 & 7) and to british building regulationsclass a1 in accordance with european normsshow loss in total mass less than 5% when tested in accordance to is 3144surface burning characteristics in accordance to astm e84a: fire spread index: less than 25b: smoke developed index: less than 50 standard dimensionsthickness(mm) width(mm) length(m)25 to 140 1220 1.52 to 4.00* standard densitydensity(kgm) thickness(mm)80 40 - 110100 25 - 100120 25 - 100144 25 - 100150 25 - 100

We understand just how vital it is for your business to have complete boiler service and repairs as quickly as possible, and to keep downtime to an absolute minimum.We stock thousands of boiler spares and parts ready for immediate dispatch. For gas boilers, steam boiler, hot water boiler and many more.Ancillaries include: Boiler pump, boiler tube, boiler heat exchanger, flue gas economisers, bespoke tanks including hot water tanks & blowdown tank , steam accumulators, steam boiler piping, boiler water treatment and many more.Byworth can supply replacement boiler sections for all Byworth and other types of boiler. This includes: shell and tube, furnaces and tube plates.

We provides ACS advanced equipment development, manufacturing, supply and works on putting into operation. Key features:advanced digital controllers meet the requirements as regards accuracy, response time, quality and adjustment ranges of all parameters;100%-hot standby of all functions;operating pressure in control system is 416 MPa and more;import component parts of hydraulic and pneumatic systems, measuring equipment;heat and vibration monitoring;oil-nitrogen, oil-air batteries.

We are supplying and Trading of Heat Exchanger, Tube Bundle, Shell and Tube Oil Cooler, Intercooler, After Cooler and Finned Tube Heat Exchangers. In addition, we also offer High Pressure Oil Cooler, Radiator Oil Coolers, Low Temperature unit. We manufacture these products using optimum quality raw material such as copper, aluminum, SS, MS, CS, cupronickel, Naval Brass and brass that is procured from the reliable vendors of the market. This quality tested range is extensively used in various Commercial & Industrial Refrigeration systems, Cement Plants, Steel Plants and Power Plant. Our major products includes Heat Exchangers, Cooling Coils and Condensing Coils.

We offer wide range of RefractoryinsulationHigh Aluminiya Bricks:Fire Clay & High Alumina Bricks Acid Resistant Bricks Magnesite BricksMagnesia Carbon Bricks Chrome Magnesite Bricks Insulation Bricks We are involved in manufacturing and supplying of Chrome Magnesite Bricks. These bricks are mainly used as chequer bricks of the regeneration zone. These bricks find use in various applications like rotatory kiln, furnaces and open hearth. They have high anti-erosion ability, and optimum resistance.

SAAR REFRACTORIES AND POWER is a solutions for economies of scale, flexibility of response and optimized maintenance efficiency.contact us on 9131659337

With rich industry experience and knowledge, we are engaged in the business of trading and supplying a qualitative assortment of rb rockwool mattress. The offered products are sourced from the most certified vendors of the market. In addition to this, our products are tested by our vendors on various parameters of quality in order to ensure their flawlessness. Our offered range finds application for insulating large vessels, boilers, small machinery, etc. Features: longer service lifebest in usereliability

We are a renowned manufacturer, supplier and exporter of high quality Burner Blocks. These products are manufactured with high quality material procured from the most trusted vendors.

HYSIL is the ideal thermal insulation solution for a wide range of verticals, especially in energy-intensive industries. Made with calcium silicate, the HYSIL blocks can be used to insulate high-temperature applications like ducts, boilers, steam pipe lines and furnaces among many others. Their high load-bearing capacity makes them ideal for heavy-duty equipment across industries. In addition, HYSIL blocks are literally maintenance-free and have a life of more than 20 years.

Our industrial fan range presents you with Air circulators and heavy duty exhaust fans for all your industrial needs. Our air circulators provide you not only with uninterrupted air flow but also ensure that it reaches in every corner of your rooms. The heavy duty exhaust fans maintain steady cross ventilation. Manufactured by one of India's leading electrical company, they are high on quality and low on maintenance.

We are deals with Ramming Mass, Silica Ramming Mass, Acidic Ramming Mass, Induction Furnace, Ramming Mass, Magnesite Ramming Mass. Our products quality is best having very low rate.

We produce a wide range of standard anchoring systems, to match all types of lining. We offer anchors suitable for single and dual layer lining, brick, ceramic, fibre and Castable refractory. All refractory anchoring systems are produced in SS 304, SS 310, Alloy 601 and other heat resistant alloys.

From insulating to dense products, Riverside Refractories, Inc. is able to supply a full line of castable refractories, including low cement, no cement, ultra low cement, and conventional castables utilizing various bonding systems. Our dense products can either be cast or pumped in place for needs within the iron and steel industry. Please consult our product table below for the proper application and method of installation. Castable Refractory FeaturesPerfect for backup and hot face liningsMade from optimum quality materialsLow thermal conductivityConservation of heat energyCastable Refractory ApplicationsSteel IndustriesGlass IndustriesFurnacesMachine manufacturing units

Raw material base calcined clay calcined bauxite white tabular max. Service temp' 1650'c 1700'c 1750'c max. Grain size 6mm 6mm 4mm al203 44 80 80 min fe203 1. 25 1. 5 0. 50 max. Refractoriness, orton'c 37 1820 37 1820 37 1820 min.

We are into all type of services related to any make Steam turbine, Gear box , Generator and power plant equipment, right from concept to operation and maintenance. Some of our major areas of interest as below.Turbine Generator set Repairs and refurbishmentTurbine Generator Spares management Electronic Governor Retrofit and ModernizationTurbine Generator set Long term and short term service agreementsTurbine Generator set Overhauling servicesTrouble shooting Power plant Erection and commissioning Consultancy and concept engineering services Up-gradation of Electrical Power & Control systems Retrofit of Excitation systems Diagnostic services Commissioning services and documentation for turbine, generator and complete power plant Efficiency studies and improvement Condition assessment and Re-location of power plant and equipment Design, manufacturing, supply and commissioning of all LT, HT, control panels and control system Design, manufacturing, supply and commissioning of Automation systems Supply, installation and commissioning of new and used power plant and TG set.