Other Products / Services #1624034

Type

• Flare Unions
• Flare Nuts
• Flare Tees
• Flare Elbow – Male / Female
• Flare Connector
• Flare Stop Plug
• Flare Adaptor
• Reducing Flare Unions
• Reducing Flare Tees
• Flare Nut Long Neck
• Flare Nut Short Neck
• Gauge Adaptor

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirements.

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packing

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Brass Round Stud Anchors
• Brass Wood Anchors
• Brass Pool Anchor
• Brass Concrete Anchors
• Brass Drop Anchor
• Brass Sleeve Anchors
• Brass Slotted Anchors
• Brass Knurling Anchors

Application

• Air ducts
• Cable trays
• Curtain rails
• Substructures
• Rails
• Protective wall panels
• Safety covers
• Suspended ceilings

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Brass Finish
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packing

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• BW 2 Part Cable Glands
• BW 4 Part Cable Glands
• CW 2 Part Cable Glands
• CW 4 Part Cable Glands
• A1 / A2 Type Cable Glands
• E1W Cable Glands
• E1FW Cable Glands
• Single / Double Compression Cable Glands

Application

• Indoor / Outdoor Armoured Cable
• Indoor / Outdoor Unarmoured Cable

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Brass Finish
• Any coating as per customer specifications

Accessories

• PVC Shrouds
• Earth Tags
• Lock Nuts
• Stop Plugs
• Reducers
• Adaptors
• Entry Threaded Seal

Packing

• Inner Plastic Packing
• Carton Packaging

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Flat Plug Pin
• Round Pin
• Earth Pin
• Charger Pin
• Electric Pin
• Socket Pin
• Knurled Head Pin
• Special Pin

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Golden Finish
• Silver Finish
• Nickle Platted
• Chrome Platted
• Tin Plated
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Dome Nut
• Hex Nut
• Square Nut
• Hex Full Nut
• Lock Nut
• Rivet Nut

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Transformer Bushing Metal Parts
• Transformer HV Bushing Parts
• Transformer LV Bushing Parts
• Transformer Connecting Lugs
• Transformer Accessories etc.

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Any kind of Precision Turned Components can be made as per Customer’s Specification & Drawing.
• Specialize in making Critical Components with a Tolerance level of +/- 0.05 mm
• In-house World Class Technology which gives Substantial Production & Quality.

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• U Clamp
• Spilt Bolt Connector
• A Clamp
• Saddle
• G Clamp
• Square Tap Clamp
• Earth Rod

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Golden Finish
• Silver Finish
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Nickle Platted
• Tin Plated
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Brass Terminal for PCB Switch
• Brass Terminal for MCB Switch
• Brass Terminal for Electric Connector

Material Type

• Free Cutting Brass IS 319 Type (l)
• Other grades which are followed as per custom requirements are CZ 121, CZ 131, C3604, CDA 360, and DTD 627 etc.
• Any Special Brass Material Composition as per customer’s requirement

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Golden Finish
• Silver Finish
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.

Type

• Washer
• Box Terminal
• Plug Pin Bended
• Clamp
• Earth Tag
• Brass Link
• Terminal Contact Etc.

Application

• Riveting
• Fittings
• Support
• Locking
• Fastening
• Electromechanical Industry
• Automobile Industry Etc.

Material Type

• Brass Sheet Half Hard – IS 410
• 63 / 37 Half Hard Brass Sheet

Threads

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF, UNEF and NPT Threads
• BSP & BSPT (Parallel & Taper Threads)
• Any threads as per specifications

Finishing and Coating

• Natural – Clean from Oil & Burns
• Golden Finish
• Silver Finish
• Nickle Platted
• Chrome Platted
• Any coating as per customer specifications

Packing

• Bag Packaging
• Inner Plastic Packing
• Carton Packaging
• Wooden Carton Packingg

Special Features

• Thread as per International Go and Not Go Gauge Standard.
• Deep Groove for maximum Pull out Resistance.
• Inner Diameter (ID) after threading with very close tolerance to prevent unrequired flush to enter.