safe n sure solutions private limited

Sodepur, Kolkata, West Bengal

A Practical Overview of the SKG 20 Cotton Knitted Glove

The SKG 20 represents a straightforward, utilitarian approach to hand protection and comfort. Built from cotton with a knitted construction, this full-fingered glove in white and a 10-inch size offers a blend of breathability, flexibility, and modest protection suited to a variety of everyday and light industrial applications.

Material and Construction Cotton is the primary material in the SKG 20, lending the glove natural softness and good moisture absorption. Cottons breathability helps keep hands cooler and reduces sweat buildup during extended wear. The knitted pattern enhances these properties: knitted gloves are typically more flexible and conforming than woven alternatives, allowing for easier hand movement and improved tactile sensitivity. The knitted structure also provides a degree of stretch, making the gloves comfortable for a range of hand shapes within the stated size.

Size and Gauge Marked as 10 inch in size with a gauge of 10, the SKG 20 is aimed at accommodating average adult hands while maintaining a snug but comfortable fit. Gauge refers to the number of stitches per inch in the gloves knit; a 10-gauge knit strikes a balance between durability and dexterity. It is fine enough to offer reasonable detail work capability while still producing a fabric that is robust enough for repeated use and laundering.

Design and Wear Type The full-fingered design provides complete coverage of each finger and the palm, which is important for jobs or tasks where protection from dirt, abrasion, or light contact is desired. Full-fingered gloves also aid hygiene by reducing direct skin contact with handled items. The simple, continuous cuff typical of knitted gloves keeps the glove in place without restrictive closures, offering rapid on-and-off use and compatibility with other protective gear, such as sleeve protectors or wrist straps.

Color and Practical Considerations White is often chosen for cotton gloves used in inspection, assembly, or handling tasks where visibility of dirt or contamination is important. The color enables quick assessment of cleanliness and can be useful in environments where marks or residues must be monitored. However, white may show stains readily and require more frequent laundering to maintain a pristine appearance.

Typical Uses and Suitability The SKG 20 is well-suited to light assembly work, quality inspection, electronic component handling (when static-dissipative properties are not required), general maintenance, and household tasks. Its cotton composition makes it comfortable for prolonged wear, but it is not designed for heavy mechanical protection, chemical resistance, or high-heat environments. For tasks requiring cut resistance, liquid-proofing, or thermal insulation, purpose-built alternatives should be selected.

Care and Longevity Cotton gloves are machine-washable and can be laundered repeatedly; however, care should be taken to follow appropriate washing instructions to avoid shrinkage or loss of shape. Over time and with frequent laundering, knitted cotton may thin and lose elasticity, so periodic replacement is normal for maintaining fit and protective function.

Conclusion The SKG 20 cotton knitted glove, white and full-fingered at a 10-inch size with a 10-gauge knit, is a practical option for users seeking lightweight, breathable hand coverage for inspection, assembly, and light-duty tasks. Its knitted cotton construction prioritizes comfort and dexterity while offering basic protection and ease of caremaking it a sensible, cost-effective choice for many everyday applications.

ARTICLE CODE DYNAX Style Derby safety shoes Type Low ankle Upper Genuine Buff grain leather Toe 200 J Steel toe Sole Double density direct injected PU sole Lining Soft grey color PU fabric Electrical Properties Antistatic Sole Resistance between 100 K ohm - 1000 mega ohms. Stitches Grey nylon thread Lace Round, blk-grey Size 6 11 Tongue Leather padded with PU foam Color Black Socks Full EVA padded. Antistatic Weight 945 Grm (Pair) Tolerance 5% Size 7 Standard IS: 15298 Part II. 2016. As per EN 20345 S1 The DYNAX Derby Safety Shoe: Design, Features, and Applications The DYNAX safety shoe is a low-ankle, derby-style protective footwear designed to meet the durability and safety needs of industrial and service environments. Crafted with a genuine buff grain leather upper, the shoe combines traditional work-shoe aesthetics with modern protective technologies. Its construction follows recognized safety standardsIS:15298 Part II (2016) and EN 20345 S1ensuring that it fulfills mandatory protective requirements for many workplace settings. Construction and Materials The DYNAX features a 200 J steel toe cap that provides robust impact protection without compromising the derbys relatively low profile. The upper is stitched with grey nylon thread and presented in classic black, while the tongue is leather padded with PU foam to enhance comfort and reduce pressure on the instep. The lining consists of a soft grey PU fabric that contributes to wearer comfort and breathability. Comfort and Fit Comfort is prioritized through a full EVA padded sock lining that is antistatic and anti-bacterial, helping to control odors and provide cushioning during prolonged use. The shoe is available in sizes 611, and a typical pair weighs approximately 945 grams (size 7) with a tolerance of 5%. Round blackgrey laces allow secure adjustment, and the padded tongue and soft lining minimize friction and pressure points. Sole and Electrical Properties A double-density, direct-injected PU sole offers a balance of cushioning and rigidity. The sole is formulated to resist abrasion, chemicals, acids, and alkalis, and provides slip resistance suitable for many work surfaces. Electrically, the shoe is antistatic with a sole resistance that falls between 100 kiloohms and 1000 megaohms, helping to dissipate static build-up without exposing the wearer to greater electrical hazard. Protection and Performance Key safety attributes include the certified steel toe cap and compliance with established protective footwear standards (EN 20345 S1). The shoes materials and construction deliver high tear and tensile strength as well as excellent resistance to abrasionimportant properties for work environments where footwear endures heavy use. The soles chemical resistance makes the DYNAX appropriate for workplaces where incidental contact with cleaning agents, oils, or dilute acids and alkalis may occur. Applications DYNAX is intended for a broad range of industrial and service applications. Typical use cases include: Manufacturing industries where impact, abrasion, and slip hazards are present. Construction sites requiring toe protection and durable soles. Warehouse operations with material handling and vehicle traffic. Service industries and facilities maintenance where comfort and antistatic properties are beneficial. Environments that utilize automation and robotics, where antistatic footwear helps reduce electrostatic discharge risks. Advantages and Limitations Advantages of the DYNAX include its combination of classic derby styling with certified safety features, breathable yet robust materials, and multi-hazard resistance (slip, chemical, abrasion). The relatively light weight and padded interior enhance wearer compliance over long shifts. Limitations are inherent to any safety shoe: while antistatic, it is not rated as electrically insulated against live electrical hazards; similarly, its 200 J steel toe offers substantia

Material Hook Option Ideal Use Attachment point Construction Adaptability Ergonomics Compliance Dope-dyed high quality polyester webbing Scaffolding For use with guided-type fall arrester — suitable for construction, tower, or ladder work One common dorsal D-ring for fall arrest Two front D-rings at chest point Dope-dyed polyester webbing; fall indicator to prevent reuse after a major fall; dual-color scheme for easy differentiation Adjustable thigh & shoulder straps; adjustable chest strap Ideally positioned sit strap for extended comfort Conforms to EN 361 Note: Inspect the harness before each use. Replace or remove from service if the fall indicator has deployed or if webbing, stitching, or hardware show signs of damage.   A full-body safety harness is an essential component of personal fall-protection systems used in construction, tower maintenance, ladder work and other activities that expose workers to the risk of falls from height. The specifications in this brief describe a harness engineered for durability, worker comfort and regulatory compliance. This essay explains the harness’ materials, attachment options, ergonomic features, adaptability, safety indicators and inspection requirements, and why those elements matter in real-world use. Materials and construction The harness is made from dope-dyed, high-quality polyester webbing. Dope-dyeing imbues color into the fiber during manufacture rather than applying pigment to the finished webbing; this process improves colorfastness and can enhance resistance to UV degradation compared with conventional surface-dyed textiles. Polyester is widely used for fall-protection webbing because it balances strength, abrasion resistance and moderate stretch under load, maintaining stability of the harness’ geometry in a fall. The harness also incorporates a fall indicator, a dedicated feature designed to show if the webbing has been subjected to a major fall event; once deployed, the indicator signals that the harness must be removed from service. Attachment points and hook option This harness provides multiple attachment points to support different work scenarios and compliance with guided-type fall-arrester systems. A common dorsal D-ring located on the wearer’s back serves as the primary fall-arrest attachment for vertical guided systems. Two front D-rings positioned at chest level allow for positioning, rescue, or tie-off options when tasks require forward-facing work or controlled positioning. The listed hook option of “scaffolding” suggests compatibility with scaffolding systems and anchorage hardware commonly used on building sites; users should always confirm that the anchorage and connectors used are rated and certified for the intended loading and system type. Ergonomics and adaptability Comfort and fit are crucial for both safety and worker acceptance. This harness uses an ideally positioned sit strap to distribute load comfortably during suspension, reducing pressure points and fatigue during prolonged periods in a harness. Multiple adjustment points—adjustable thigh and shoulder straps plus an adjustable chest strap—allow the harness to be tailored to a wide range of body shapes and sizes. Proper adjustment is important not only for comfort but to ensure the harness positions attachment points correctly and limits the potential for injury in a fall by keeping forces on the body distributed across the pelvis and thighs rather than concentrating on the torso or neck. Visual design and usability A dual-color scheme is noted for easy differentiation of components. Contrasting colors help users don the harness correctly, quickly identify left/right or front/back, and inspect webbing routing and buckles visually before each use. Clear visual cues speed pre-use inspections and reduce the chance of miswearing, which is a common human-factor risk in fall protection. 

SpecificationDetails

Available Color:Clear

SpecificationDetails

The SEM 22 foldable ear protection device combines practical design with comfort-focused features to meet the needs of consumers who require reliable hearing protection in noisy environments. Built from durable PVC and presented in a red-and-black color scheme, this medium-sized ear muff model balances portability, adjustability, and sound attenuation for a range of applications.

One of the defining characteristics of the SEM 22 is its foldable construction, which makes it convenient to store and transport. The compact folding mechanism is especially useful for workers and hobbyists who move between job sites or need to stow their hearing protection in a toolbox or backpack when not in use. Despite its collapsible form, the ear muff maintains structural integrity thanks to the PVC material, offering a lightweight yet sturdy shell that can withstand regular handling.

Comfort is central to the SEM 22’s design. The ear cups are wide and large, providing ample coverage around the ears to create an effective acoustic seal without concentrating pressure on small areas. Soft headbands and cushioned ear pads reduce fatigue during prolonged wear, while an adjustable headband and up-down sliding cup adjustment enable users to customize fit for different head sizes and shapes. Additionally, the headband rotation feature—allowing 360° movement—permits fine-tuning of cup alignment and facilitates single-ear use or stowing the cups flat when folding the unit.

Functionally, the SEM 22 is intended for ear protection across multiple contexts, from industrial and construction sites to shooting ranges and noisy workshops. Its Noise Reduction Rating (NRR) of 23 dB indicates it can significantly reduce overall sound exposure, making it suitable for moderate to high ambient noise levels. While not rated for the highest-impact noise environments, it offers meaningful attenuation that can help prevent noise-induced hearing loss when used properly and in tandem with safe work practices.

The product’s charging time of two hours suggests the presence of an electronic component—likely for powered noise attenuation, auxiliary audio playback, or integrated communication features. A rechargeable system can enhance usability compared with disposable battery options, provided users monitor charge levels to ensure continuous protection during long shifts. The foldable design and rechargeable capability together give the SEM 22 practical advantages for modern users who expect both convenience and performance.

Overall, the SEM 22 foldable ear muff presents a balanced offering of comfort, adjustability, and effective noise reduction. Its medium size, large ear cups, and soft headband make it comfortable for extended wear, while features such as sliding cup adjustment and 360° headband rotation provide a customizable fit. With an NRR of 23 dB and durable PVC construction, this model is well-suited for many everyday noisy settings where reliable hearing protection and portability are priorities.