Our Products
Type :-
ULTRA PREMIUM weatherproof interior and exterior emulsion is a smooth, water-based, modified acrylic, interior and exterior wall finish with silicon additives.
Features :-
Recommended Use :-
ULTRA PREMIUM Acrylic interior and exterior emulsion is interior and exterior wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
Remarks :
1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.
3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints.
5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
6) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application.
7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
Application Method
Product : | Thinner | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
---|---|---|---|---|
SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
SAFFRO’s ULTRA PREMIUM Acrylic Interior and exterior Emulsion by Brush, Spray, Roller : | Water | B-40-60 S-70-75 | B-20-30 S-20-25 | 3-4 hrs |
(B=Brushing, S=Spraying) | ||||
N.B. For Interior and exterior purpose we recommended SAFFRO’s WALL PROTECT Interior and exterior Wall Primer. | ||||
Safety Features : | Non-flammable | |||
Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. | |||
Type :-
BUILDER COAT Acrylic Interior Exterior emulsion is matt finish.
Features :-
BUILDERCOAT Acrylic INTERIOR EXTERIOR emulsion provides a smooth long lasting rich finish to the INTERIOR & EXTERIOR wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
Recommended Use :-
BUILDERCOAT Acrylic INTERIOR / EXTERIOR emulsion is INTERIOR / EXTERIOR wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
Remarks :
1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.
3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints.
5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
6) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application.
7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
Application Method
Product : | Thinner | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
---|---|---|---|---|
SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
SAFFRO’s BUILDERCOAT Acrylic INTERIOR EXTERIOR Emulsion by Brush, Spray, Roller : | Water | B-40-60 S-70-75 | B-20-30 S-20-25 | 3-4 hrs |
(B=Brushing, S=Spraying) | ||||
N.B. For INTERIOR EXTERIOR purpose we recommended SAFFRO’s WALL PROTECT INTERIOR EXTERIOR Wall Primer. | ||||
Safety Features : | Non-flammable | |||
Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. | |||
Type
Pure Acrylic Emulsion with high sheen.
Features
It provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
Recommended Application
STAR valvet glow emulsion is an interior and exterior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
Remarks
a) Kindly refer to the MSDS for the saffro mellow coatings & resins STAR velvet glow emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
Application Method
No | PRODUCT | THINNER | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
---|---|---|---|---|---|
1 | Sand the surface with emery paper No.100 and wipe | ||||
2 | Saffro’s Cement (Water or Solvent based) Wall Primer | MTO or Water | B- 8-10, S- 15-20 | B-30-40, S-20-25 | 6-8 hrs |
3 | Saffro’s Wall Putty | Water | Small amount of water flow | 4-6 hrs | |
4 | Sand the Surface with emery paper and Wipe | ||||
5 | Saffro’s Cement(Water or Solvent based) Wall Primer | Water or MTO | B- 8-10, S- 15-20 | B-30-40, S-20-25 | 6-8 hrs |
6 | Sand the surface with emery paper No. 320 and wipe | ||||
7 | Saffro’s STAR velvet glow emulsion by Brush, Spray, Roller | Water | B-60-70, S-70-75 | B-20-30, S-20-25 | 3-4 hrs |
8 | Saffro’s STAR velvet glow emulsion by Brush, Spray, Roller | Water | B-60-70, S-70-75 | B-20-30, S-20-25 | 3-4 hrs |
9 | (B=Brushing, S=Spraying) | ||||
10 | N.B. For Exterior purpose we recommended Saffro’s WALL PROTECT Exterior Wall Primer. | ||||
11 | Safety Features : | Non-flammable | |||
12 | Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. |