Safintra Roofings India Limited Mumbai, Maharashtra

Versatile is a premium range roofing profile from Safintra that gives the look of tiles. It is available in Pre-painted Zinc Coated Steel, Prepainted Aluminium-Zinc Coated Steel or Pre-Painted Aluminium sheets, with long life unmatched by other Tile Profiles. Versatile is also available with the option of the Polyvinyl Di-Fluoride (PVDF) paint system, provides roofing that has a 15 year fade free warranty. All this goes to mark out Versatile as a classy, lightweight, durable and beautiful product that is ideal for the most discerning user.

S5 clamps and brackets are a unique solution for easy attachment of any external element to the roof without damaging the external area of the roof. These innovative products avoid leakages and ensure the life of the roof is not compromised. S5 clamps are engineered for attaching all kinds of rooftop accessories: Solar Panels, signs, walkways, satellite dishes, antennas, rooftop lighting, and lightning protection systems, mechanical equipment etc. S5 clamps allow for the installation of accessories such as solar panels without needing to perforate the metal roof thus preserving the sheet warranty. Safintra Roofing provides specific clamps to suit each of our roofing profiles. S-5-K Grip Mini Clamp is suitable for our clip lock Saflok 700 profile -: • S5 clamps are non-penetrating clamps for concealed fix systems. The clamps attach to the roof panel by tightening of bullet nosed setscrews against the seam. • Inserts used for the profile allows a tight fit and provides increased holding strength for the profile. • Compatible with aluminium zinc coated steel • S5 clamps are made from High tensile aluminium and non-ferrous stainless steel hardware • S5 clamps also improve wind uplift performance and can double wind resistance at a minimal cost S5 Z mini clamps are designed for our standing seam Safzip profile -: • The S-5-Z Mini is a medium-duty non-penetrating seam clamp that is compatible with our Safzip profile • Its design allows it to be easily installed anywhere along the length of the rib • The patented setscrews slightly dimple the metal seam material leaving puncture-less roof • Compatible with most common metal roofing materials excluding copper. S5 Protea brackets are designed to work with Versatile and Comax 1000 roofing sheets -: • Protea brackets have an adjustable attachment base to accommodate varying width and height of the roofing profile • The bracket comes with factory applied, adhesive rubber sealant thus ensuring quick installation and weather – proof fit. S5 Trap brackets are designed to work with Trimflute Roofing Sheet -: • The Trap Bracket comes with a factory applied EPDM rubber gasket seal already on the base, and the S-5 Patented reservoir conceals the EPDM from UV exposure, preventing drying and cracks. • The Trap Bracket is mounted directly onto the crown of the panel, straddling the profile • Trap Bracket attach almost anything to the exposed-fastener trapezoidal roof profiles. • No messy sealants to apply on the Trap bracket, the factory-applied EPDM rubber gasket weather-proofs and makes installation easy. • It can be used for almost any attachment.

Ridge ventilators are ventilators that are installed at the peak of a roof, allowing warm, humid air to escape the building. They provide evenly distributed ventilation along the entire underside of the roof of a building. Safintra Roofing provides Ridge Ventilators designed specifically to meet the architectural requirements of modern industrial designs. The design of the ridge ventilator is compatible with the Safzip standing seam and Saflok 700 roofing systems provided by Safintra Roofing. The ridge ventilators render an easy fit on the roof without causing any damage to it. Especially design Soaker plate of higher thickness is used for installation of Ridge ventilators. They can be used on industrial warehouses, industrial plants, factory sheds, and any other large industrial buildings. The ridge ventilators can be made either from 0.50 mm TCT Pre-Painted Galvalume material with AZ150 coating, or 0.50 mm TCT Pre Painted Galvanized material with Z120 coating or bare material 0.47mm TCT with AZ 150 coating, as per the requirement of the consumer. Advantages of Safintra Ventilators:- - They are covered with a bird mesh, to restrict the entry of birds in the ventilator. - They are assembled to provide a leak proof ventilation solution. - They enable easy installation on the roof.

Louvres with horizontal slats are angled to admit light and air into the building. They help to keep out rain, direct sunshine, and noise. The standard dimensions of the Louvres produced by Safintra Roofing are 2.5 x 1.2 meters and are made from either 0.50 mm Pre Painted Galvalume with AZ150 coating, or 0.50 mm Pre Painted Galvanised Iron with Z120 coating. The Louvres can be custom made to the client’s specification in different sizes and shapes as well. Advantages of Safintra Louvres:- 1] Incorporate 5-10 mm Hemming to increase the strength of the product 2] Louvre fixing is done with Standard Method using Aluminium Rivets and screw fixing (GI screw). 3] Provided in any standard colour as per requirement of the customer.

Saflok 700 is an angular interlocking standing seam trapezoidal rib profile roofing sheet, with roll formed on our stationary and mobile mills from our various material Specification options. Saflok 700 is an angular interlocking trapezoidal rib profile with a net cover width of 700 mm. Saflok 700 has a unique clipping system, which combines both strength and agility to enable the material to expand and contract under normal circumstances with no damage to the material. The bends on the clip allows flexibility whilst still providing sheer strength. The clip allows positive interlocking on all flutes and interlock with each other allowing easy alignment of the material. The fully interlocking Saflok 700 clip is to incorporate two anchors to clasp the two inner ribs and a dual action component to positively hold down the male-female joint. For any further specifications please contact our technical department.

Trimflute is a subtle square fluted profile sheet where the long flute gives the profile its strength with long spanning capabilities. Trimflute can be used as roofing as well as a wall cladding profile. The general shape and appearance of the square flutes ensure that Trimflute is totally acceptable to be used as roofing and wall cladding. The square flutes of Trimflute type sheeting ensure excellent drainage characteristics. The trendy look of Trimflute is widely accepted since it serves both the purpose of strength as well as aesthetics. Trimflute can be factory cranked, curve and bull nosed to a wild range of radii. For further details contact our Technical Department.