High level of quality consciousness ensures that these sprockets deliver the highest levels of performance at all times for our valued customers.

The Chain Sprockets we manufacture are subject to a multitude of quality tests & checks to ensure that they are conform to stringent guidelines of international regulatory standards of quality & performance. From durability, & accuracy and to precision & performance, all critical parameters are duly considered and incorporated in our sprocket range.

An automatic transmission, also called auto, self-shifting transmission, n-speed automatic (where n is its number of forward gear ratios), or AT, is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.

Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. Bevel gears are most often mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well. The pitch surface of bevel gears is a cone.

These gears are proved to be highly efficient and have got an extensive industry use. These are made available to clients at definite time and reasonable prices.

Straight Bevel Gears cuting perform onGLESON STRAIGHT BEVEL GENERATOR, where the angle between the shaft could be anything except zero or 180 degree. Bevel gears when have equal number of teeth and shafts are called miter gears.

These gears are manufactured while keeping all norms in mind and are available to clients at competitive prices.

Miter Gears provide a smooth and quite operation and a long life when properly mounted and lubricated. These gears have proper backlash and end of the gear teeth will flush with each other during functioning. These type of gears develop both radial and axial load while transmitting power.

These are used to reduce rotational speed or to allow higher torque to be transmitted.

Worm Gears are a type of gear which consists of a cylinder with a spiral groove mounted on shaft. Worm gears are used as power gearings in presses, rolling mills, conveying engineering, mining industry machines, rubber machines and many more areas.The gears have high performance and a longer life.

Gears and Pinions are the components which have a wide usage in automobile and similar industries.

Gears is a component within a transmission device that transmit force to gear or device. Their functioning depends on their construction and power, therefore, we provide the best quality gears to clients. Whereas a Pinion is one of the smallest gears which are also used as drive gear in many remote controlled devices. Both of these products are given to clients after doing quality checks and a lot of research work.

These gears have got a sophisticated functioning and a great use in automobile industry.

The Helical Gears manufactured by the company offers a smooth functioning and are recommended when the process involves high speed, large power transmission or where noise abatement is important. The leading edges of the teeth of these gears are not parallel to the axis of rotation but they are set at an angle.

These gears are made by using fine raw material and are available in various customized sizes as per clients requirement.

Spur gears manufactured by the company are the most simplest and most common type of gears which are generally used for transmission of rotary motion between parallel shafts. These have got an operating efficiency of 98-99%. The teeth in these gears project radically and are aligned parallel to the axis rotation giving an efficient end result.

High level of quality consciousness ensures that these sprockets deliver the highest levels of performance at all times for our valued customers.

The Chain Sprockets we manufacture are subject to a multitude of quality tests & checks to ensure that they are conform to stringent guidelines of international regulatory standards of quality & performance. From durability, & accuracy and to precision & performance, all critical parameters are duly considered and incorporated in our sprocket range.

An automatic transmission, also called auto, self-shifting transmission, n-speed automatic (where n is its number of forward gear ratios), or AT, is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.

Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. Bevel gears are most often mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well. The pitch surface of bevel gears is a cone.

These gears are proved to be highly efficient and have got an extensive industry use. These are made available to clients at definite time and reasonable prices.

Straight Bevel Gears cuting perform onGLESON STRAIGHT BEVEL GENERATOR, where the angle between the shaft could be anything except zero or 180 degree. Bevel gears when have equal number of teeth and shafts are called miter gears.

These gears are manufactured while keeping all norms in mind and are available to clients at competitive prices.

Miter Gears provide a smooth and quite operation and a long life when properly mounted and lubricated. These gears have proper backlash and end of the gear teeth will flush with each other during functioning. These type of gears develop both radial and axial load while transmitting power.

These are used to reduce rotational speed or to allow higher torque to be transmitted.

Worm Gears are a type of gear which consists of a cylinder with a spiral groove mounted on shaft. Worm gears are used as power gearings in presses, rolling mills, conveying engineering, mining industry machines, rubber machines and many more areas.The gears have high performance and a longer life.

Gears and Pinions are the components which have a wide usage in automobile and similar industries.

Gears is a component within a transmission device that transmit force to gear or device. Their functioning depends on their construction and power, therefore, we provide the best quality gears to clients. Whereas a Pinion is one of the smallest gears which are also used as drive gear in many remote controlled devices. Both of these products are given to clients after doing quality checks and a lot of research work.

These gears have got a sophisticated functioning and a great use in automobile industry.

The Helical Gears manufactured by the company offers a smooth functioning and are recommended when the process involves high speed, large power transmission or where noise abatement is important. The leading edges of the teeth of these gears are not parallel to the axis of rotation but they are set at an angle.

These gears are made by using fine raw material and are available in various customized sizes as per clients requirement.

Spur gears manufactured by the company are the most simplest and most common type of gears which are generally used for transmission of rotary motion between parallel shafts. These have got an operating efficiency of 98-99%. The teeth in these gears project radically and are aligned parallel to the axis rotation giving an efficient end result.