We are offering Multi-Function Valves, which are installed on the Reservoirs flange. The Multi-Function Valves are also equipped with a rod system that actuates a magnet, which depending in their position will indicate the level of fuel contained in the reservoir. Multi-Function Valves are available in many sizes and also in accordance to the dimensions of the Reservoirs available in the market.

The Multi-Function Valves have their name from the fact that its body houses a number of valves with different functions.

The Main Valves are:
Service Manual Valve80% Limit Filler ValveNo Return Valve (Check Valve)Excess Flow ValveCut off valve (available in the new generation Multi-Function Valves)Thermal Fuse Valve (available in the new generation Multi-Function Valves)Safety Valve (Pressure Valve)
Main Functions of Above Mentioned Valves:
The Service valve is normally used only during maintenance requirements and in case of accidents. In the case of accidents, the Service valve must be closed in order to prevent hazardous conditions.The 80% limit filler valve has the function to limit the filling of the reservoir to 80% of the reservoir maximum filling capacity.The No Return Valve is positioned in the inlet of the Multivalve and it is connected through a pipe to the filler valve. Its function is to limit the flow into the Reservoir avoiding the LPG flow to return towards the Filler Valve.The Excess Flow Valve has the function to interrupt the flow of LPG out of the reservoir in the event of accidental breaking of the Copper pipe that feeds the engine.The cut off valves, this valve is nothing more than an LPG solenoid valve incorporated into the Multivalve and it has the function to stop the flow of LPG when turning the engines power off. This valve is also useful when performing maintenance to the LPG system.The Thermal Fuse valve is a valve used only in the case of fire and it has the function to discharge the reservoir of its LPG content in the case of extreme high temperatures. The discharge of the reservoir, in case of fire, will avoid the explosion of the Reservoir.The Safety Valve, the function of the safety valve is to release the excess pressure in the reservoir. This valve will come into action only at high temperatures (in case of fire) or in case of over pressure created in extreme conditions. Such as filling the tank to 100% its fuel capacity and with a high external ambient temperature.
Important Notes:
When accidentally filling the tank to its 100% capacity, drive the vehicle for approximately 30 Km. before parking. After running the vehicle to an empty LPG reservoir take the vehicle in a maintenance control and inform the installer of the incident. The installer is responsible that should check the system after the first filling. It is important to control the Multivalve functionality, in particular during filling

During the Multivalve installation it is absolutely forbidden to hamper with the float rod. Hampering the Multivalve will compromise its integrity therefore its functionality. It is dangerous to hamper the Multivalve. The Multivalve is installed to the Reservoir and is connected to the Filler valve and to the LPG Solenoid valve.

We are offering multi function valves that is suitable for cylindrical and toroidal tanks. these multi function valves are designed in conformation with the international quality standards and are offered to our clients in liquid or vapor withdrawal models.

applications : toroidal tanks are generally used to optimize space in passenger cars. very often, they closely resemble the spare tyre and uses its space. this has become quite popular from the oem view point.

We are the principal manufacturer and exporter ofIndustrial Cylinders, which are known for their high quality and robustness. we make special industrial cylinders that are widely used by industries for multiple applications. these industrial cylinders are subjected for different gases like hydrogen, oxygen, nitrogen, etc.
in demand for :-
made from high quality materialmanufactured by sahuwala high pressure cylinders (p) ltdseamless steel tubesdesigned to specific applications for different types of gases such as hydrogen, oxygen, nitrogen, etc100% performance guaranteeapproved and certified bychief controller of explosives (ccoe)bureau of indian standards (bis)bvqituvsgs

We are offering cylindrical tanks with closed top, which is widely used for the storage of water as well as various acids, chemicals, caustic solutions of different concentrations & at diverse temperatures.

applications ; we have a wide assortment ofcylindrical tanks, which are widely used for the storage of lpg in vehicles.
specifications :-
cylindrical tanks :-
sl nocode nosizewater capacity(ltrs)01esc04090830d200 x l3208.302esc02051530d200 x l55015.3703esc02051830d200 x l65018.1304esc02052530d200 x l8752505escol121430d244 x l3561406esc02053630d244 x l8463607esc02054430d244 x l10244408esc02053530d270 x l6903509esc02054430d270 x l8724510esc04015030d270 x l9665011esc04055030d300 x l7945012esc02055530d300 x l8655513esc04016030d300 x l9406014esc04057030d300 x l10887015esc03114030d315 x l5954016esc04094530d315 x l6604517esc02056030d315 x l7235018esc02056030d315 x l8586019esc04016030d315 x l10607520esc05080030d360 x l8908021esc05090030d360 x l9909022esc05100030d360 x li087100
toroidal tanks
sl nocode nosizewater capacity(ltrs)01esc040925030d475 x h185 x id 151 25.002esc040936030d565 x h185 x id 15135.503esc040141030d587 x h185 x id 15140.4504esc010936030d565 x 185h x id18235.805esc010939030d565 x 200h x id18239.106esc010943030d565 x 220h x id18243.507esc010938030d585 x 185h x id18238.908esc010942030d58 x 200h x id18242.409esc010947030d585 x 220h x id18247.1
special tanks :-
slnocodenosizewatercapacity(ltrs)01esc140180310140x180x3104.95
cylindrical tanks 200 to 315 od :-
sl now.couter diacontr. lengthshell lengthdesigned min. thicknormal thickdished end heightvalve padhha 1b 1110.02003782181.902.9030.050.032.318.8215.02005473871.902.9030.050.032.318.8324.02445864182.322.9034.061.030.517.0436.02448556872.322.9034.061.030.517.0544.024410358672.322.9034.061.030.517.0625.02705072912.572.9040.567.529.916.4730.02705993832.572.9040.567.529.916.4835.02706904742.572.9040.567.529.916.4940.02707815652.572.9040.567.529.916.41045.02708726562.572.9040.567.529.916.41140.03006454052.452.9045.075.029.215.71245.03007184782.452.9045.075.029.215.71350.03007925522.452.9045.075.029.215.71455.03008656252.452.9045.075.029.215.71535.03155252752.572.9046.079.028.915.41640.03155913412.572.9046.079.028.915.41745.03156584082.572.9046.079.028.915.41850.03157254752.572.9046.079.028.915.41955.03157915412.572.9046.079.028.915.42060.03158586082.572.9046.079.028.915.4
cylindrical tanks 360 to 450 od :-
sl now.couter diacontr. lengthshell lengthdesigned min. thicknormal thickdished end heightvalve padhha 1b 12140.03604761962.943.550.090.028.314.82250.03605782982.943.550.090.028.314.82355.03606293492.943.550.090.028.314.82460.03606804002.943.550.090.028.314.82570.03607825022.943.550.090.028.314.82680.03608846042.943.550.090.028.314.82785.03609366562.943.550.090.028.314.82890.03609877072.943.550.090.028.314.829100.036010898092.943.550.090.028.314.83090.04008165363.273.540.0100.027.814.231100.04008986183.273.540.0100.027.814.232110.04009817013.273.540.0100.027.814.233120.040010637833.273.540.0100.027.814.234130.040011458653.273.540.0100.027.814.235120.04508615813.674.027.5112.527.413.836140.04509907103.674.027.5112.527.413.837160.045011208403.674.027.5112.527.413.8
toroidal tanks :-
sl now.cinner dia outer diaheightdesigned min. thicknormal thickabcdefg124.01514751851.932.9152164212137136.458.2127235.81825651852.122.9183195243168136.458.2127339.11825652002.222.9183195243168151.465.7135443.51825652202.362.9183195243168171.475.7145538.91825851852.192.9183195243168136.458.2127642.41825852002.32.9183195243168151.465.7135747.11825852202.442.9183195243168171.475.7145842.51826001902.282.9183195243168141.460.7127945.01826002002.352.9183195243168151.465.71351050.01826002202.482.9183195243168171.475.71451162.11826002702.833.1183195243168221.4100.7170

We would like to introduce ourselves as a company dealing with all kind ofLPG Dispensing Stationunder one roof. In the expansion of our concern, we started dealing with Auto LPG Dispensing Stations (ALDS) project. We would like to take the pleasure to inform you about our ALDS project, which would have a great scope in the field of Auto GAS.
Components Require :-
TankSubmersible Pump :- The pumps are approved for use with Butane and Propane and any mix of Butane and Propane. This may include up to 15% Ethanol, 10% Methanol, or 15% MTBE. It has been assumed that Auto gas includes Toluene, Benzene, Xylem, and Isooctane in varying percentages.Features :-
Temperature rate :- 45o C to + 55o CSystem Pressure Max. :- 25 barElectric connectionAccording to local regulationDispenser :-Fine mesh filter (25 micron)Gas separatorDifferential pressure valveBall valves for shut offPressure gaugeFlame proof on / off switchDispensing nozzleComplete lighting systemHigh pressure dispensing hose dn-19With safety break away couplingLength :- 4.5m, electrically conductiveBurst pressure 100 barCorken Pump :-Technical Specification Dispensing Pump :-Make :- CorkenService :- Transfer LPG liquid from Storage Tank to Dispenser.Type :- Coroflo 150 Regenerative Turbine typeModel :- FF 150Inlet size :- 1 ANSI 300 # flanged RFOutlet :- 1 ANSI 300 # flanged RFMax. working pressure :- 400 psiRPM :- 2900Max. differential pressure :- 10 bar (145 psi)Impeller material :- BronzeO Ring :- Buna NSeal :- Ni ResistFlow :- 5 lpmMotor Drive :- Provided by us at Mumbai (7.5 HP motor, 2900 rpm)Type of mounting :- Rigid Base (Frame mounted)Accessories :- By pass valve Corken B166 Size 1 NPT Back pressure check valve like Corkens Flo-Check valvesRemote Operate Valves
Statutory Rules :-
Operation of LPG Bottling Plants, Storage, Transportation and Distribution of LPG are required to be carried out in accordance with various prevailing national safety rules and regulations. This section covers the salient features in brief with respect to the following regulations that are in force. For complete details with regard to the various provisions, original Notification/Documents may be referred to :
Gas Cylinders Rules 1981 (Under Indian Explosives Act, 1884)Static & Mobile Pressure Vessels (Unfired) Rules 1981 (Under Indian Explosives Act, 1884)The Factories Act 1948 (Amended in 1987)Electrical installation under Indian Electricity Rules with latest amendments.The standards of Weights & Measures Rules 1987, Under Weights & Measures Act 1976The Standards of Weights & Measures (Packaged Commodities Rules 1977) License to import Gas Cylinders in Form D issued with latest amendments.Liquefied Petroleum Gas (Regulation of Supply and Distribution Order 1993)The Motor Vehicles Act 1988Environmental Regulations :-Water (Prevention & Control of Pollution) Act 1974 (Amended)Air (Prevention & Control of Pollution) Act 1981 (Amended)The Environment (Protection) Act 1986Manufacture, Storage and Import of Hazardous Chemicals Rules 1989Guidelines for Environmental clearance of new projectsDraft standard for Auto LPG Dispensing
Guide lines :-
The site should be clean, in level, without any hindrance like semi construction workThe site should not be any overhead electrical cables or telephone cables passing above or underground from the installation areaThere is no underground trench, live or dead electrical cable lines, drainage lines, water pipe lines, wastewater drainage, or any other obstructions for particular location. It is not allowed in the installation. If it is existing then it should be removed by the client and then only the site can be acceptedOne room is required for setting up control panel/ electrical panel & Air compressor. The room size required is 2 meters X 3 meters approximatelyWe require power for our installation i.e., 7.5 KW. However, if the power is not available request the client to sanction for the power required for the installation
Technical Specifications LPG Dispensing Unit :-
GeneralLPG Pump Model21 Impeller Stages ( P 300 V17 -21 )ManufacturerGilbarco Veeder Root, SimsburyUSQuality Certification of ManufacturerISO 9001Atex ApprovedLCIE CertifiedType of Motor ProtectionEx s IIA T4 Class 1 Zone 0Weight40 kgRequired NPSH100 mmFeaturesReversible without damage.Operates without ext. bypass.No run-in period required.Motor & Pump bolt together.PumpPump TypeMulti stage centrifugalPump Diameter100 mmDischarge head2" NPTConduit Size" NPTBearingsStainless Steel with Carbon Graphite AlloyOuter Shell304 stainless steelDischarge HeadPainted cast ironElastomersViton & NitrileImpellersCelcon ( Acetel copolymer )MotorMotor typeSubmersible PolyphaseRating220/380 V 50 HzBearingsMetallized Carbon GraphiteMotor Shaft416 stainless steel/nickel platingOuter Shell304 stainless steelFluid ParametersProduct PumpedPropane/butane or any mixtureApplicable Pumping TemperatureFrom -45 C to + 40 CDensity Range0.48 to 0.60 kg/literViscosity Range at Pumping Temp.Kinematic0.34 to 0.17 m2/sec.Dynamic0.19 to 0.08 centipoiseSystem protectionMotor BearingsInternal bypass of 22 LPMTemoeratureOn-winding thermal protectorElectricalOn- winding thermal protectorPerformance @ .50 SGDifferential Pressure @ 70 LPMAT 7 BARDifferential Pressure @ 100 LPMAT 4 BAREfficiencyDesigned for 70 litres / min @ P 6.8 bar suitable to feed 2 nozzles @ 35 litres / min simultaneously.