Kolkata, West Bengal, India
Our Products
This is the dream solution for today's furniture manufacturers and carpenters. A combination of conventional materials and modern technology, it is ideal for curved or rounded structures, especially when small radii are required.
It can be easily bent by hand and gives tremendous flexibility to any application.
Flexiply is made of Gurjan species, And these species from the north east range of forests, exclusively with phenolic resin which conditions it to undergo extreme climatic changes. It is available in both cross grain and long grain in 1.5mm, 4mm, 6mm, 8mm, 12mm and 18mm thicknesses.
It has a bending radius of 360 at minimum for
4mm - Up to 7cm diameter6mm - Up to 10cm diameter8mm - Up to 12cm diameter
HardWood plywood, also known as Curve-Ply, Flexply, Wacky Wood and Wiggle wood, bending plywood, is normally made out of hardwood imported veneers with the layers all running in one direction, this allows bendability to the panel and can be applied on a curved radius. Our stocked bending plywood is manufactured in the United States and distributed throughout the country.
Application :Used in variety of cabinet applications, curved furniture parts and fixtures such as displays in department stores, restaurants, commercial buildings and building of spiral stairways. Most times it will be overlaid in a custom application with veneer, high pressure laminate, for finished columns or other rounded or curved radius surfaces.
We specialize in offeringCommercial Face Veneers Plywoodthat are high acclaimed for water & fire resistance, smooth surface and durability. These veneers are produced from high quality wood & timber and comply with the international quality standards. We are offering Commercial Face Veneers Plywood with below specification.
Salient Features:
Decorative PVC WoodGrain Film (PVC woodgrain foil/ PVC wood grain sheet, PVC wood sheet, PVC decorative foil) has perfect lay-flat, beautiful color. It have more than 100 kind of emboss grain can be choosed. Over 150 kind printing design, like teak, oak, cherry, pine, sapele, maple, walnut, beech, etc. Use for audio box, gift box, furniture, plywood, cabinet, veneer, particle panel lamination, PVC overlay, hot laminate on aluminium foil, steel panel for door, marine, ceiling.
Salient Features:
100 % Eucalyptus timber is used for making Tycoon Plywood.Good quality phenol for giving it a boiling water resistant feature. Specially chosen veneer from quality wood not only gives longevity strength & stability but also gives a rich look to the ambience it is fitted-in strict ISI standard further add up to the credibility to the unanimous choice of designers & carpenters.
An ideal choice of furniture & fixture, kitchen, bathroom, cupboard, doors, plywood, bus & truck bodies railway coaches etc. This superior quality plywood is unaffected from boiling water after hour of contact it's anti-warp, properties makes it literally invincible. Moreover the ply is insulated through special chemical treatment to save it from termites & insects & enhance the life-span of your furniture.
Tycoon BWP boards are made of 100 % Pine wood
Salient Features:
Standard Sizes (in ft. ) :8 x 4 , 8 x 3 , 7 x 4 , 7 x 3, 6 x 4, 6x3, 5 X 4, 5 X 3
Standard Thickness:3 , 4 , 6, 9, 12, 16, 19, 25, 19 mm Block Board
A ply bonded with marine grade DELICA (Boiling Water Proof) resin that can endure extreme weather conditions and withstand alternate drying and wetting. BWP Grade Plywood is waterproof and specifically designed for those who want marine ply at an affordable cost. This is the only ply with the unique POWERBOND technology which ensures optimum adhesive strength apart from GLP (Glue Line Positioning) which makes it Borer and Termite proof.
Suggested Uses:
Marine vessels, decks & shelf boards, even interior & exterior furniture such as in kitchen, bath areas & garden furniture too.
Salient Features :
Standard Sizes (in ft. ) :8 x 4 , 8 x 3 , 7 x 4 , 7 x 3, 6 x 4, 6x3, 5 X 4, 5 X 3
A quality products from Green wood Crafts (P) Ltd. Has a wide range of quality veneers which gives excellent vision with extra strength to furniture.
Both natural and reconstituted veneer are available.
Product catagory are available on demand.
Why Veneer?
Veneer is a more responsible use of natural resources.Veneer can be cut in many ways to accentuate the wood.Veneer slicing can create more consistency in colourand graining than solid wood.Veneer is more readily available in a greater quantity ofspecies than solid wood.It is less expensive to use veneer than solid wood.Solid wood tends to spilt along the grain.
Thickness :1mm - 6mm.
We sell Film Faced and Non- Film Faced plywood used for shuttering purpose. In Non- Film faced plywood we have several range like 19, 23 , 27 kg. .
Thickness :9, 12, 18 mm
Size :8x4
Film-Faced shuttering plywood is made out of fully hard wood and highly density and high pressure board, both sides covered with film, used in all construction places, particularly in roofing and columns for uniform finish. We have long range of film faced plywood in 23 KG, 27 KG, 30 KG, and 34 KG in both MR and WBP glue. Not just this, the film faced plywood we are supplying, is made up of the world class film of Dynea Indonesia.
