Write a Review
Our Products
We offer a complete product range of SSD/HDD Mounting Kit Bracket, Mounting Bracket / Kit Silver Steel, 3 Feet Projector Ceiling Mount Bracket, Universal Projector Ceiling Mount Bracket White and Female Cable Back PCI Panel Bracket
Brand :Storite
Color :BLACK
Product Type :2.5 TO 3.5 INCH HDD/SSD MOUNTING BRACKET, SATA 3 CABLE AND SATA POWER ADAPTER CABLE.
Compatible Device :SSD HDD Notebook Hard Disk Drives.
Product Description :
2.5 TO 3.5 INCH MOUNTING BRACKET :
This is a metal tray that will allow you to mount one 2.5" SSD drive into 3.5" drive bay. This bracket does not support cases that require bottom mounting. *The hard drive shown is not included.This is the 2.5-inch solid state drive bracket to 3.5-inch hard drive bays with full-ferrous metal screws SSD bracket is precision die stamping, consistency, easy to install, compatible with SSD solid state drive and an ordinary hard drive compatible SATAI SATAII SATAIII holes and 3.5-inch hard disk.
Sata 3 Cable + 6inch Sata Power Adapter Cable :
SATA 3.0 cable, straight w/ metal latch, Black color SUPER FAST 6GB/S. Backwards compatible with SATA revision 1 and 2 ( SATA I and SATA II). Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps.Both end of this internal cable features a straight connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration. Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices.Connects a Serial ATA Hard Drive to a standard internal power connector SATA (15 pin) to 4 pin Molex (LP4).
Warranty:1 year warranty with SaiTech IT Private Limited on all products.
Brand: Storite
Color: Silver
Product Type: Hard Drive Bracket
Description:
100% quality and Brand new.
If you want to mount 2.5" drives into your PC and got a free 3.5" slot, then this conversion bracket is the optimal solution meeting you requirements.
The frame bracket provides ample space for two SSDs or laptop HDDs measuring 2.5"
The conversion frame is therefore an efficient solution in casings with limited space for additional storage devices, especially Mini PCs, Server racks, HTPCs or Cube cases.
This dual bracket HDD frame is moulded using high-quality alloys, is a precise fit and thus universally supports all common 2.5" drives.
Apart from the conversion frame itself, the package further includes screws also.
It fits for 2x2.5" drives providing valuable space for additional PC components.
Brand: RiaTech
Max load capacity:15Kg - 360 ROTATION
Color: White
Description:
For projectors with 4, 5 or above mounting holes on the top. Please measure the maximal diagonal distance of any 2 holes of all mounting holes on the top of the projector; it should less than 14.2 inch.
Where It Use:
Brand: RiaTech
Color: White
Description
For projectors with 4, 5 or above mounting holes on the top. Please measure the maximal diagonal distance of any 2 holes of all mounting holes on the top of the projector; it should less than 14.2 inch.
For projectors with 3 mounting holes on the top. Please measure the maximal distance of any 2 holes on the top of the projector; it should less than 14.2 inch.
Please check your ceilling wall, is it concrete wall or regular wall ? The Ceiling plate dimensions: 3.1 inches x 3.1 inches (square), make sure your wall could be installed.
Warranty: 1 Year Warranty By SaiTch IT on All Products
dual usb 2.0 a type female to motherboard 9 pin header cable with pci bracket screw pane.
with 12cm standard height pci bracket.
this usb 2.0 type a female to motherboard header adapter features a 9-pin usb header connection. .
adapter for computer cases to dual port usb connector on motherboard.
enable your motherboard usb port function.
perfect for connecting additional usb 2.0 ports on motherboards with additional headers.
Brand: RiaTech
Color: White
Description
For projectors with 4, 5 or above mounting holes on the top. Please measure the maximal diagonal distance of any 2 holes of all mounting holes on the top of the projector; it should less than 14.2 inch.
For projectors with 3 mounting holes on the top. Please measure the maximal distance of any 2 holes on the top of the projector; it should less than 14.2 inch.
Please check your ceilling wall, is it concrete wall or regular wall ? The Ceiling plate dimensions: 3.1 inches x 3.1 inches (square), make sure your wall could be installed.
Warranty: 1 Year Warranty By SaiTch IT on All Products
Saitech IT (Saitech IT Pvt Ltd.)
43 Shreynagar Society 2,Opp. GEB Substaion, Subhanpura,Behind Inorbit Mall,Vadodara GJ 390023, Gujarat
Share us via
