Samarth Engineering

Ichalkaranji, Kolhapur, Maharashtra

We are engaged in providing clients with superior quality Universal Material Testing Machine. The Universal Material Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. The Universal Material Testing Machine can also conduct hardness test on various metals.

 

We offer supreme quality Tensile Material Testing Machine characterized with precision screw and column construction and variable speed drive. The Tensile Material Testing Machine is suitable for studying mechanical behavior of various materials like metals, polymers, elastomers etc. The Tensile Material Testing Machine confirms to IS, BS & ASTM standards.

Fatigue Testing Machine we offer is extensively used in research institute, laboratories, and also supplied to material manufacturers and diverse industries. We make available the Fatigue Testing Machine which is Table model that does not require a foundation. The Fatigue Testing Machine we offer is light weight, simple in design and high performing. Components & Working Of Impact Testing Machine

• The rotating beam type machine in which load is applied in reversed bending fashion
• The standard 8 mm diameter specimen is held in special holders at its ends and located such that it experiences a uniform bending moment
• The specimen is rotated at 4200 rpm by a motor
• A complete cycle of reversed stresses in all fibers of the specimen is generated during each revolution
• The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever
• Total number of revolution at which the specimen fails is recorded by a mechanical counter
• An interlocking system puts off the motor at specimen failure
• Machine meets requirement of IS 5075-1969 Standards
• 6 digit electronic counters instead of mechanical counter is offered
• Machine with maximum bending moment upto 400 Kg. cm is also available
• Fixed with simple lever system for changing load
• Calibration in Nm also offered

Used To

• Test the fatigue strength of materials
• Draw S-N diagram

We are offering computerized universal material testing machine. the computerized universal material testing machine is closely monitored for sensitivity, accuracy and calibration during every stage of manufacture. The computerized universal material testing machine is in compliance with the british standards 1610: 1964 and is: 1828-1975. salient featuresgrade "a" of bs- 1610 : 1964 and grade 1.0 of is -1828-1975accuracy of + 1 % is guaranteed from 20% of the load range selected to full loadbellow 20% of the selected range, the maximum permissible error is 0.2% of the full reading

We make available Impact Testing Machine Model SE-IT 30, which is specifically designed for conducting Izod & Charpy Test. The test methods in the machine conform to BS: 131: PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2: 1993. Impact Testing Machine is suitable for testing raw material specimen as well as finished components. Avail from us the Impact Testing Machine at market leading prices. Components & Working Of Impact Testing Machine

• Pendulum of the machine is mounted on antifriction bearings
• Contains two starting positions, the upper one for Charpy and the lower one for Izod testing
• The Pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen
• The output is read from the maximum pointer on the dial scale

Offered With

• Self centering tong
• V - notch milling cutter
• U - notch milling cutter
• Caliper gauge for checking V notch for Izod & Charpy as per BS: 131 :PART 1, 2, 3
• Depth notch gauge including V & U notch, angle & radius

Controls of PendulumThe Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated.

Torsion Testing Machine we offer is used on diverse metal wires, tubes and steel materials. We are recognized as one of the dependable Torsion Testing Machine Manufacturers and Suppliers in India. The Torsion Testing Machine offered by us is made up of excellent quality materials that ensure notable features like high durability, effective performance and low maintenance. We supply Torsion Testing Machines at market leading rates. Detail

• Fixed with auto torque selector to regulate torque ranges
• Contains geared motor to apply torque to specimen through gearbox
• Attached with autographic recorder for relation between torque and angle of twist
• Accuracy + 1 % of the true torque

Suitable For

• Torsion and Twist test on diverse metal rods and flats
• Torque Measurement by pendulum dynamometer system