Product / Services
Post Buy Requirement
Samrat Machinery
Samrat Machinery
Rajkot, Gujarat, India
Add Review
Call 08068051360 Ext. 161

Our Products

  1. Plastic Machine 4 Products available

Plastic Machine #2844842

VHF Series Plastic Injection Moulding Machine

VHF Series Plastic Injection Moulding Machine

VHF Series Plastic Injection Moulding Machine that we offer is gaining high popularity due to its high performance, smooth functioning and sturdy construction.  We are one of the prominent Manufacturers, Exporters and Suppliers of Plastic Injection Moulding Machine from Gujarat, India. The manufacturing of our Plastic Injection Moulding Machine is done under the supervision of experts. Thus, buying Plastic Injection Moulding Machine from us will be the safest option for the buyers.

Technical Specifications

Model Unit VHF-30 VHF-45 VHF-70
Injection Unit
Screw Diameter mm 30 35 45
Screw L/D Ratio mm 20:1 20:1 20:1
Shot Weight Gram 75 120 180
Screw revolution (Max) RPM 200 220 250
Injection Strock mm 135 135 135
Injection Pressure Kg/cm2 1250 1250 1300
Injection Rate CC / Sec. 48 65 75
Hopper capacity Ltr. 10 14 18
Plasticising capacity Kg. / Hr. 16 30 40
Nozzle Contact Force Ton 3 3 4.5
Nozzle Strock Mm 180 200 220
Heating Zone Nos. 4 4 5
Clamping Units
Mould Clamping Force Ton 45 80 110
Mould Opening Stroke mm 200 250 300
Mould Platen Size mm 480 x 480 530 x 530 625 x 625
Distance Between Tie Bar mm 300 x 300 350 x 350 400 x 400
Min. Mould Height mm 140 160 180
Max. Mould Height mm 250 300 350
Max. Day Light mm 375 450 500
Ejector For (Hyd,) Ton 1.5 1.5 2
Electric Devices
Pump Motor Kw 3.75   5.0 H.P. 5.6   5 H.P. 9.3   12.5 H.P.
Heater kw 5.6   7.5 H.P. 6.75  9 H.P. 9.3   12.5 H.P.
Total Electrical Power Kw 9.35   12.5 H.P. 12.35   16 H.P 18.6   25 H.P.
General L x W x H L x W x H L x W x H
Machine Size (LxWxH) mm 1850 x 780 x 3048 2000 x 800 x 3200 2700 x 900 x 3600
Machine Weight (App.) Ton 1.88 2.25 2.75
Oil Tank Capacity Ltr. 210 250 300

 

Note : Due to continuous Research and Development, We reseeve the right to change Specification (S) at any time without prior notice.  

View Complete Details
Ask Latest Price & Details
VTH Series Plastic Injection Moulding Machine

VTH Series Plastic Injection Moulding Machine

Few words that describe our VTH Series Plastic Injection Moulding Machine are high performance, smooth functioning and sturdy construction. Our company is an eminent name, which is counted among the top Manufacturers, Exporters and Suppliers of Plastic Injection Moulding Machine from Gujarat, India. The manufacturing and testing of our Plastic Injection Moulding Machine are done as per the set industry standards. Thus, it is the perfect option on which buyers can easily rely.

Mould Plate Diagram


Download Detail File : Click Here

Technical Specifications

Model Unit VTH - 15 VTH - 30 VTH - 45 VTH - 70
Injection Unit
Shot Capacity (Polystyrene)* Gms, 25 50 100 175
Hopper Capacity Ltrs. 8 10 14 17
Shot Per Hour Nos. 180 150 120 105
Plasticising Capacity* Kg./Hr. 4.5 7.5 12 18
Locking Unit
Mould Clamping Force Tons 15 30 45 70
Mould Size (V x H) mm x mm 200 x 200 225 x 225 250 x 250 300 x 300
Minimum mould thickness mm 90 90 110 110
Maximum mould thickness mm 250 250 275 300
Mould Opening Stroke mm 200 225 250 275
Daylight Opening mm 450 475 525 575
Hydraulic Unit
Oil Tank Capacity Ltrs. 60 70 85 100
Pump Operating pressure (Max.) Kg./Cm2 160 160 160 160
System Pressure (Max.) Kg./cm2 110 120 130 140
Electric
Heating Loud KW 1 2 2.75 3.5
Electric Motor ||| Phase HP 2 3 5 7.5
Total Connected Load KW 3 4.25 6.5 9
Other Dimension (apx.)
Net Weight Kg. 500 675 850 1000
Gross Weight kg. 800 1000 1200 1400
Overall Dimension (L x W x H) mm 1500 x 800 x 2050 1600 x 875 x 2200 1725 x 950 x 2400 1900 x 1100 x 2750

 

Note : Due to continuous Research and Development, We reseeve the right to change Specification (S) at any time without prior notice. 

View Complete Details
Ask Latest Price & Details
VDH Series Plastic Injection Moulding Machine

VDH Series Plastic Injection Moulding Machine

VDH Series Plastic Injection Moulding Machine is widely used for moulding different types of plastics. We are counted among the top Manufacturers, Exporters and Suppliers of Plastic Injection Moulding Machine from Gujarat, India. We manufacture Plastic Injection Moulding Machine using quality approved components under the supervision of industry experts. We also conduct stringent quality tests on Plastic Injection Moulding Machine so as to ensure that only the defect-free product reaches the customers’ end.

Features :

  • The Machine have Vertical Injection by hydraulic cylinder and Horizontal Clamping by direct hydraulic cylinder.
  • Existing hand moulding dies can be used.
  • Large Table size and die gap for easy mould
  • Automatic Hydraulic granule feeder with adjustable stroke for correct material feeding.
  • Tested Electrical, Electronic and Hydraulic systems for trouble free operation.
  • Pinion drive system for vertical die setting and slotted C-clamp for Horizonatal die setting, which save the mould setting time.
  • Injection and Clamping effort may be adjustable to suit the size of mould and pressure can be adjusted while machine is running.
  • Heat Exchanger, Master Hydraulic Safety.

Technical Specifications

Model Unit TABLE - TOP VDH-5 VDH-8 VDH-12
Injection Unit
Shot Capacity (Polystyrene)* Gms, 12 25 50 100
Hopper Capacity Ltrs. .... 8 10 14
Shot Per Hour Nos. 180 150 120 100
Plasticising Capacity* Kg./Hr. 1.5 3.75 6 10
Locking Unit
Mould Clamping Force Tons 3 5 8 12
Mould Size (V x H) mm x mm 150 x 150 180 x 180 215 x 215 250 x 250
Distance Between tie bars mm 190 245 280 330
Minimum mould thickness mm 70 80 90 100
Maximum mould thickness mm 125 175 200 250
Mould Opening Stroke mm 110 180 225 225
Daylight Opening mm 200 250 275 300
Hydraulic Unit  
Oil Tank Capacity Ltrs. 25 50 60 75
Pump Operating pressure (Max.) Kg./Cm2 110 160 160 160
System Pressure Kg./cm2 100 110 120 130
Electric
Heating Loud KW 1 1 2 2.75
Electric Motor ||| Phase HP 1.5 2 3 5
Total Connected Load KW 2.5 3 4.25 6.5
Other Dimension (apx.)
Net Weight Kg. 225 350 425 550
Gross Weight kg. 400 500 575 750
Overall Dimension L x W x H mm 700 x 750 x 1275 1100 x 1100 x 2050 1200 x 1200 x 2200 1250 x 1250 x 2400
Floor space req. for operating L x W x H mtr. 1.75 x 1.75 x 2 2 x 2 x 2.2 2 x 2 x 2.4 2 x 2 x 2.6

 

Note : Due to continuous Research and Development, We reseeve the right to change Specification (S) at any time without prior notice.  

View Complete Details
Ask Latest Price & Details
VTF Series Plastic Injection Moulding Machine

VTF Series Plastic Injection Moulding Machine

High performance, smooth functioning and sturdy construction are some of the attributes that make our VTF Series Plastic Injection Moulding Machine highly popular. We are one of the eminent Manufacturers, Exporters and Suppliers of Plastic Injection Moulding Machine from Gujarat, India. It is manufactured under the strict vigilance of experts. Our Plastic Injection Moulding Machine is subjected to stringent quality tests so as to eliminate each and every possibility of defect from it.

Features :

  • The Machine have Vertical Injection by hydraulic cylinder and Horizontal togge Clamping actuated by direct hydraulic cylinder.
  • Large Platen Area.
  • For positive locking heavy duty assurate toggle arrangement.
  • Automatic Hydraulic granule feeder with adjustable stroke for correct material feeding.
  • Tested Electrical, Electronic and Hydraulic systems for trouble - free operation.
  • Pinion drive system for vertical die setting and setting.
  • Injection and Clamping effort may be adjustable to suit the size of mould and pressure can be adjusted while machine is running.
  • Heat Exchanger.
  • Master Hydraulic Safety.

Technical Specifications

Model Unit VTF-30 VTF-45 VTF-70
Injection Unit
Screw Diameter mm 25 30 35
Screw L/D Ratio mm 20:1 20:1 19:41
Shot Weight Gram 40 75 120
Screw revolution (Max) RPM 180 200 210
Injection Strock mm 100 135 150
Injection Pressure Kg/cm2 1150 1250 1300
Injection Rate CC / Sec. 47 67 75
Hopper capacity Ltr. 10 15 25
Plasticising capacity Kg. / Hr. 10 15 25
Nozzle Contact Force Ton - - -
Nozzle Strock Mm - - -
Heating Zone Nos. 4 4 4
Clamping Units
Mould Clamping Force Ton 30 45 70
Mould Opening Stroke mm 225 250 300
Mould Platen Size mm 225 x 380 250 x 430 300 x 480
Distance Between Tie Bar mm 100 x 254 130 x 290 150 x 330
Min. Mould Height mm 150 150 175
Max. Mould Height mm 225 250 300
Max. Day Light mm 470 515 570
Ejector For (Hyd,) Ton 1 1.5 1.5
Electric Devices
Pump Motor Kw 2.25 3.0 H.P. 3.75 5 H.P. 5.6 7.5 H.P.
Heater kw 3.75 5 H.P. 5.6 7.5 H.P. 6.75 9.0 H.P.
Total Electrical Power Kw 6   8 H.P. 9.35 12.5 H.P 12.35 16.5 H.P.
General L x W x H L x W x H L x W x H
Machine Size (LxWxH) mm 1650 x 900 x 3000 100 x 950 x 3100 2000 x 1100 x 3000
Machine Weight (App.) Ton 1.25 1.50 1.75
Oil Tank Capacity Ltr. 150 210 275

 

Note : Due to continuous Research and Development, We reseeve the right to change Specification (S) at any time without prior notice.  

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Ishvar Patel (Samrat Machinery)
  • 4, Mavdi Plot, Malviya Nagar, , Rajkot, Gujarat - 360004, India
  • Share us via
    Linkedin pinterest
  • Call 08068051360 Ext. 161