Other Products / Services #5852696

Sand Seiver is widely used to determine AFS (fineness no of sand)

Motor 1/8 HP Single Phase

Sieve Set as per ISS No.53, 75, 106, 150, 212, 300, 425, 600, 850, 1700

Microns Dia. Of Sieve 200 mm,

Product Code :SAMS FST - 003

It is use to find out clay % of raw sand.

Motor 1/20 HP Single Phase, cycles 50,

Speed Regulator Timer, Glass jar, Syphon

Product Code :SAMS FST - 005

Double walled, Memmert German Type heavily insulated for Laboratory use. Temperature range ambient to 250C. Accuracy of the Thermostat 1C, without air circulation by fan.

Product Code :SAMS CVL - 019

Construction : Single walled construction, the wall is made of thick high grade stainless steel sheet of SS - 304 grade. The lid is made of stainless steel sheet. Provided with built in safety valve, pressure gauge, pressure release valve.

Product Code :SAMS CVL - 026

The apparatus is designed to study the cam profiles and performance of cam and follower system. A shaft supported by ball bearings upon which three different types of cams can be mounted.

Product Code :SAMS DYN - 001

To study the determination of characteristics curves of radius of rotation against controlling force (Actual & Theoretical) for all governors. The set-up is designed to study the working of different governors normally used to control the speed. It consists of a main spindle, mounted vertically on the base plate.

Product Code :SAMS DYN - 003

In a rotating shaft at which instability occurs is called whirling or critical speed. When shaft reaches critical speed it will have maximum deflection. It is applicable in power transmitting equipments like turbine, propeller shafts, etc.

Product Code :SAMS DYN - 004

A four-bar linkage, also called a four-bar, is the simplest movable closed chain linkage. It consists of four bodies, called bars or links, connected in a loop by four joints.

SINGLE SLIDER CRANK MECHANISM :When one of turning pairs of a four bar chain is replaced by sliding pair, it becomes a single slider crank chain

DOUBLE SLIDER CRANK MECHANISM :The double slider-crank linkage has four links joined in a kinematic chain consisting of two revolute joints and two sliding or prismatic joints

Product Code :SAMS DYN - 008

Compound gear trains involve several pairs of meshing gears. They are used where large speed changes are required or to get different outputs moving at different speed

Product Code :SAMS DYN - 017

Gear Train is any combination of gear wheels by which motion is transmitted from one shaft to another shaft. In epicyclic gear trains, the axes of shafts on which the gears are mounted may move relative to a fixed axis.

Product Code :SAMS DYN - 019

The apparatus consists of a pad, which can be tilted to the required angle. An endless belt, which moves beneath the pad, carries the oil over its surface from oil bath. When the pad is tilted over the oil film, pressure is developed, the pad is provided with pressure tapings parallel and perpendicular to belt direction. The pressure distribution is measured over a multi tube manometer. The belt is driven by a variable speed motor. The tilting angle and minimum gap between pad and belt can be adjusted and characteristics thus can be studied at various gaps, inclination and relative surface speeds.

Product Code :SAMS DYN - 020

The set-up is designed to study Coriolli's Component of Acceleration of a slider crank mechanism. Here the mechanical slider system is replaced by a continuous stream of water flowing through a steady rotating pair of tubes. These tubes can be rotated at various speeds by using a swinging field motor which also acts as dynamometer.

Product Code :SAMS DYN - 023

The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.

Product Code :SAMS DYN - 028

The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.

Product Code :SAMS DYN - 029

The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.

Product Code :SAMS DYN - 030

To verify the relation simple pendulum.

To verify the relation of compound pendulum & to determine the radius of gyration.

To study radius of gyration of bi-filar suspension.

To study the undamped free vibration of spring mass system.

Product Code :SAMS DYN - 031

This is an open circuit Wind Tunnel which provides a region of controlled airflow into which models can be inserted. The propulsion is provided by a fan at downstream of working section. The tunnel consists of bell mouth shaped entry to guide the air smoothly into settling chamber consisting of honeycomb and nylon mesh screens which filters and stabilizes the air flow. This follows working section or test section where various models can be tested.

Product Code : SAMS AE - 001

A bench mounted beam apparatus to allow students to investigate the deflections and reactions in simply supported and cantilevered beams

Product Code : SAMS AE - 003

The unit uses water as the flow medium. A contrast medium (dye) is injected through small needles into the flow area. Various drag bodies (included) can be placed in the area of flow. In addition, sources and sinks can be simulated and illustrated using eight additional openings in the flow area.

Product Code : SAMS AE - 006

The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette.

Product Code : SAMS CHE - 004

The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line

Product Code : SAMS CHE - 003

To study the progress of a Chemicals reaction CSTR

To determine the Reaction Rate Constant

Product Code : SAMS CHE - 002

Conforming to the specifications and tolerance in accordance to I.S. 460 for fine material made out of 300mm. G.I. frame easily fit on each other equipped with square hole punch sheet aperture size 125mm, 100mm, 90mm, 80mm, 75mm, etc lid and pan.

Product Code : SAMS CVL - 004

Laboratory model capacity 2.5 cft mounted on rubber tiers and sturdy frame with towing rod. ELECTRICALLY OPERATED.

Product Code : SAMS CVL - 00

Conforming to the specifications and tolerance in accordance to I.S.-4031. Suitable for proper vibration of mould 70.6mm. Suitable to work on 220/230 Volts, single phase A.C.supply, with endless belt and coiled springs,

Product Code : SAMS CVL - 008

Conforming to the specifications and tolerance in accordance to I.S.-1199 used for the determination of the workability of the concrete. The concrete is deform in a container and is vibrated after removing the cone on a small vibrating table operated at a fixed amplitude and frequency operation 220 Volts single phase A.C.supply

Product Code : SAMS CVL - 009

Conforming to the specifications and tolerance in accordance to I.S.-2720, Part-XVI used for the determination of the laboratory C.B.R. consists of : - 01.) Load Frame Hand operated capacity 50 KN (5000 kgs.) with high and low rate of travel of the lead screw. 02.).C.B.R. Mould:-Conforming to the specifications and tolerance in accordance to I.S.-9669-1980 made of chromium steel 150mm.

Product Code : SAMS CVL - 013

SAMS Los Angles Abrasion Machine is used for determining are resistance to bear of small size Course Aggregate and Crushed rock The machine consistence of a hollow cylinder mounted one sturdy frame on ball bearings a detachable shelf which extends which stand through out the inside length of the drum catches the abrasive charge and dose not allow its two fall on the cover the drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear motor is suitable for operation on 220 Volts-50Hz- 1p.h.

Product Code : SAMS CVL - 014

All metallic construction accurately machine cut screw with a pitch of 5 mm carrying double flanged turned table of about 20 cm dia. Fitted on a heavy cast iron base and complete with two adjustable pulleys, cord & hooks without weights.

Product Code : SAMS AM - 012

SAMS is one of the primary sources for drafting supplies and drawing equipment

Product Code : SAMS ARCH - 002

Indoor Temperature Range : 32 to 122 degrees Fahrenheit; 0 to 50 degrees Celsius

Temperature Accuracy : +/- 2 degrees Fahrenheit

Product Code : SAMS ARCH - 003

Barometers are used for accurately measuring the absolute atmospheric pressure, which is vital for meteorology, ocean navigation, industry and research

Product Code : SAMS ARCH - 004

Solarmeter UVB Meter For Reptile Lamps - Measures 280-320nm with range from 0-1999 W/cm Total UVB

Product Code : SAMS ARCH - 005

SAMS is one of the primary sources for drafting supplies and drawing instruments

Product Code : SAMS ARCH - 007

To meet the variegated demands of the clients, our company is instrumental in offering an excellent quality range of Engineering Drawing Set

Product Code : SAMS ARCH - 008

This working cut section model designed to enable students to study different systems of an automobile petrol and diesel engine & demonstrate its working. The setup uses an actual automobile petrol and diesel engine, sectioned at suitable locations to display internal assembles.

Product Code : SAMS CSW - 001

This working cut section model designed to enable students to study different systems of an automobile petrol and diesel engine & demonstrate its working. The setup uses an actual automobile petrol and diesel engine, sectioned at suitable locations to display internal assembles.

Product Code : SAMS CSW - 002

This working cut section model designed to enable students to study different systems of an automobile petrol and diesel engine & demonstrate its working. The setup uses an actual automobile petrol and diesel engine, sectioned at suitable locations to display internal assembles.

Product Code : SAMS CSW - 003

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

Product Code : SAMS CSW - 004

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

Product Code : SAMS CSW - 005

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

Product Code : SAMS CSW - 006

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

Product Code : SAMS CSW - 007