GST : 27IQEPS9463K1ZU
Write a Review
Our Products
We offer the best product range of Nickel 200 Pipes and Nickel 201 Pipes.
The Mix 200 Void Line gives splendid assist in streaming sea with watering. This is even inside seeing rapid sea water. Anyway by virtue of lifeless or incredibly low-speed sea water, the 200 Alloye EFW Line may be powerless against serious close by attack, which could occur under fouling natural elements or other deposits.All standard hot working techniques and cold working practices can be utilized while embellishment the UNS N02200 Welded Line. Hot working temperatures for Nickel 200 Brier Hex Line should be between a temperature extent of 1200° F and 2250° F.
Nickel 200 Pipes & Tubes Manufacturers, Nickel 200 Pipes & Tubes Suppliers, Nickel 200 Pipes & Tubes Stockists, Nickel 200 Pipes & Tubes Exporters
Nickel 200 Pipes & Tubes Manufacturers in India, Nickel 200 Pipes & Tubes Suppliers in India, Nickel 200 Pipes & Tubes Stockists in India, Nickel 200 Pipes & Tubes Exporters in India
Hot molding the Custom Nickel 200 Line is then followed by profound forming, which should be performed at temperature setting of above 1600° F. Reinforcing should be performed on the ASME SB161 Nickel 200 Line at a temperature range between 1300° F and 1600° F. Care ought to be taken while picking the harden temperature as well as time at the reinforcing temperature, in light of the fact that these two limits can immensely affect not simply the mechanical properties of the Nickel 200 Thistle Hex Line yet also the plan of the material.
Nickel 200 Pipes & Tubes Manufacturers in Mumbai, Nickel 200 Pipes & Tubes Suppliers in Mumbai, Nickel 200 Pipes & Tubes Stockists in Mumbai, Nickel 200 Pipes & Tubes Exporters in Mumbai
Specifications
| ASTM Specification | ASTM B161 ASME SB161 UNS N02200 |
|---|---|
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| ASTM B161 Nickel 200 Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| UNS N02200 Welded Pipe Size | 5.0 - 1219.2 mm |
| Nickel WERKSTOFF NR. 2.4066 EFW Pipe size | 5.0 - 1219.2 mm |
| Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg., 18 Swg., |
| 200 Nickel Pipe Schedule | XS, SCH30, SCH40, XXS, SCH80, SCH120, SCH60, SCH140, STD, SCH10, SCH10S, SCH40S, SCH80, SCH20, SCH5, SCH160 |
| Nickel 200 pipe Length | Double Random, Single Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | Nickel 200 are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Type of 200 Alloy Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW nickel 200 |
| Nickel 200 pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Marking on Alloy 200 Pipe | All ASTM B161 Nickel 200 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Application of Nickel 200 pipe | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | Large Diameter Nickel 200 pipe |
| Nickel 200 pipe manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Our stockyard | Chennai, Mumbai, Agra, Noida, Shivamogga, Ahmedabad, Bhubaneswar, Tirunelveli, Thiruvananthapuram, Pune, Bengaluru, Hyderabad, Tiruchirappalli, Dhanbad, Coimbatore, Navi Mumbai, Pimpri-Chinchwad, |
| Nickel 200 pipe Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Nickel 200 HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| Manufacturers of Nickel 200 pipe | Nickel 200 Pipe make Sumitomo Metals, Japan Alloy 200 Pipe make Schoeller Bleckmann, Austria Nickel 200 Pipe make Sanyo Special Steel, Japan Nickel 200 Pipe make Nippon Steel Corporation, Japan Alloy 200 Pipe make Kobe Special Tube, Japan Alloy 200 Seamless Pipe make Seah Steel Corporation, Korea Nickel 200 Pipe make Tubacex Tubos Inoxidables S.A., Spain |
Specifications
| Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Nickel 200 Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Nickel 200 Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Anyway this property is through and through dependent upon the temperature as well as the centralization of the course of action wherein the Nickel Alloy 201 Round Line winds up revealed to.Corrosion rates for the Alloy 201 Predictable Line in both marine and nation airs will by and large be especially low. To the extent that being impenetrable to disintegration by refined and ordinary waters, the direct displayed by the UNS N02201 Welded Line is considered awesome.
Nickel 201 Pipes & Tubes Manufacturers, Nickel 201 Pipes & Tubes Suppliers, Nickel 201 Pipes & Tubes Stockists, Nickel 201 Pipes & Tubes Exporters
Nickel 201 Pipes & Tubes Manufacturers in India, Nickel 201 Pipes & Tubes Suppliers in India, Nickel 201 Pipes & Tubes Stockists in India, Nickel 201 Pipes & Tubes Exporters in India
To be sure, even at rapid, the 201 Nickel Void Line similarly gives heavenly help with streaming sea water. Anyway when the Nickel 201 Welded Line is introduced to settings where the water is either flat or in settings where the sea water has very low speed, the Nickel 201 ERW Line is powerless against serious close by attack which subsequently can occur under conditions that are great for bio fouling animals or other horrendous stores. In steaming hot water systems, where the steam conveyed by the application contains carbon dioxide and air in unambiguous degrees, utilization rates on the 201 Alloy EFW Line will be at first high anyway will reduce with time. Yet this is possible given that conditions favor the improvement of a protective layer on the external layer of Nickel ® 201 Line.
Nickel 201 Pipes & Tubes Manufacturers in Mumbai, Nickel 201 Pipes & Tubes Suppliers in Mumbai, Nickel 201 Pipes & Tubes Stockists in Mumbai, Nickel 201 Pipes & Tubes Exporters in Mumbai
Specifications
| ASTM Specification | ASTM B161 ASME SB161 UNS N02201 |
|---|---|
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| ASTM B161 Nickel 201 Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| UNS N02201 Welded Pipe Size | 5.0 - 1219.2 mm |
| Nickel WERKSTOFF NR. 2.4068 EFW Pipe size | 5.0 - 1219.2 mm |
| Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg., 18 Swg., |
| 201 Nickel Pipe Schedule | XS, SCH30, SCH40, XXS, SCH80, SCH120, SCH60, SCH140, STD, SCH10, SCH10S, SCH40S, SCH80, SCH20, SCH5, SCH160 |
| Nickel 201 pipe Length | Double Random, Single Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | Nickel 201 are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Type of 601 Alloy Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Nickel 201 |
| Nickel 201 pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Marking on Alloy 201 Pipe | All ASTM B161 Nickel 201 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Application of Nickel 201 pipe | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | Large Diameter Nickel 201Pipe |
| Nickel 201 pipe manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Our stockyard | Hyderabad, Tiruchirappalli, Chennai, Thiruvananthapuram, Tirunelveli, Pune, Bhubaneswar, Agra, Dhanbad, Mumbai, Ahmedabad, Shivamogga, Bengaluru, Coimbatore, Noida, Navi Mumbai, Pimpri-Chinchwad, |
| Nickel 201 pipe Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Nickel 201 HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| Manufacturers of Nickel 201 pipe | Nickel 201 Pipe make Sanyo Special Steel, Japan Alloy 201 Pipe make Schoeller Bleckmann, Austria Nickel 201 Pipe make Nippon Steel Corporation, Japan Nickel 201 Pipe make Sumitomo Metals, Japan Alloy 201 Seamless Pipe make Seah Steel Corporation, Korea Alloy 201 Pipe make Kobe Special Tube, Japan Nickel 201 Pipe make Tubacex Tubos Inoxidables S.A., Spain |
Specifications
| Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Nickel 201 Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Nickel 201 Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Mr. Parth Shah (Sankalp Alloys Overseas)
Balaram Bhuvan, 4th Floor, Flat No. 409, Balaram Path, Grant Road, Mumbai, Maharashtra - 400007, India
https://www.sankalpalloysoverseas.in
Share us via
