Other Products / Services #375759

• Compact air tank that can be directly connected with a booster regulator.
• Can be used as an independent tank.
• With a safety valve port. (Option)

• Oval piston design for space saving. Possible to mount a cylinder from multiple directions.

• It is possible to mount small auto switches in 4 directions.
• No protrusion of auto switch from the mounting slot
• Available with a stroke up to 300 mm
• With auto switch (Series MDU: MDU, MDUW)

Space-saving cylinder enables cylinders to mount directly on multiple sides.

With auto switch (Series CDU: CDU, CDUW, CDUK, CDUKW, CDU-A,

ZCDUK)

• Space-saving cylinder reduces the total length by 64% and capacityby 70% compared to the CU series.

• With auto switch (Series CDUJ: CDUJ)

• Can be used in environments where contact with water or coolant occurs.
• With water-resistant 2-color indication auto switch
• Suitable for factory machinery, food manufacturing machinery, carwashes, etc.

• Applicable to operation in micro-powder (10 to 100 m) /general environments.
• Durability is 4 times stronger than the standard model in micro-powderenvironments.

• The overall length and mounting are the same as those of the standard model.(Except for some models)

• Grease film is formed on the piston rod surface to improve the durability.
• Entry of dust and foreign matter is prevented.
• The number of operating cycles can be improved even in general environments.

The floating joint can absorb any off-centering or loss of parallelaccuracy of the double acting cylinder, so centering is unnecessary.

By converting air pressure into hydraulic pressure, the same functionof a hydraulic unit can be obtained while using pneumatic equipment.

Precision cylinder with internal guide function

Compact cylinder with high-precision guide function for pick & placeapplications

• Integrated worktable with actuator
• Highly rigid and accurate slide table

• Integration of the compact guide cylinder (Series MGP) and a manualturntable.
• High precision bearings for smooth turning return movement
• Table unit has positioning mechanisms for each 90 and 180 ofrotation.

• Doubles the output in the extending direction with a unique structure.
• A built-in non-rotating mechanism using slide keys allows loads to bemounted directly.

• Locking cylinder ideal for intermediate stops, emergency stops anddrop prevention. (Bi-directional lock)
• CL1: Single-directional lock
• With auto switch (Series CDL: CDLJ2, CDLM2, CDLG1, CDL1)

• Brake mechanism has been compactly integrated into the slide table.
• Enables intermediate stops.

High output 20, 000 N (at 0.5 MPa)

• 2 types of clamping heights can be selected. : 30mm, 100mm
• Plate cylinder type: 29 mm width
• All types with lock
• Plate cylinder type with small auto switch
• Newly added guide pins and a diamond shape option (available for10 or more) for workpieces with 9, 11 and 13 hole diameters.

Ideal for separating workpieces continuously moving on conveyors, etc.

Capable of stopping pallet softly.
Stopper cylinder with shock absorber

Mechanically jointed rodless cylinder incorporated with brakemechanism and stroke sensor.

Surface mounting (DIN rail or screw stop)

Movable scale cylinder

Stroke Reading Cylinder and Counter

• Exia II BT4 (TIIS certified item)
• Three types of connectors can be selected.
• L-shaped plug connector, L-shaped plug connector with cover, terminal block type
• Three types of barriers can be selected.
• Manifold type No.: 51-SS5Y551-SS5Y7

For Output, *the applicable protocols differ depending on the series.

• Communication Cable/ConnectorCC-Link, DeviceNet, PROFIBUS DP
• Conforming to IEC61076-2-101 and IEC60947-5-2
• IP67 (IEC60529)
• Fieldwireable connectors: No exclusive tools, reduction in wiring time
• SPEEDCON: Just insert the connector and make 1/2 rotation.

The direction of air flow can be verified at a glance by the orientation of the handle.

• Possible to move the auto switch mounting position as desired
• Direct mounting
• Connection port position: Side ported and axial ported selectable
• (When a switch and angle adjuster are installed, side ported only.)
• Low pressure operation: 0.2 MPa (Size 10), 0.15 MPa (Sizes 15 to 40)
• Possible to adjust the angle as desired
• With auto switch (Series CDRB2: CDRB2W, CDRB2WU)

• Possible to transfer a workpiece at lower speeds. (5 s/90)
• With auto switch (Series CDRQ2X: CDRQ2X)

• Lightweight Weight Max. 10% reduction: 585 g 525 g
• Weight reduced by the change of the body shape and internal construction
• Built-in dust protection mechanism (Standard)
• Dust resistant option now available. (Made to Order: -X85, -X86)
• Long stroke One unit can handle workpieces with various diameters.
• A large amount of gripping force is provided through the use of a double piston
• mechanism, while maintaining a compact design
• Small auto switches can be directly mounted

• Vertically compact, lightweight due to the wedge shaped cam construction
• Ideal for operations which external force is applied to, such as press fitting operations
• Repeatability: 0.01 mm
• Long stroke type: Strokes two times longer than the standard type
• Gripping of cylindrical workpieces
• Reliable removal of the workpiece with through-holes and a center pusher

• Wedge shaped cam driving mechanism
• High rigidity with a slide type guide
• A dust-proof, drip-proof, external force resistant, and environmental
• resistant type that can be used for a variety of applications.
• To suit the environment, a selection of dust cover materials (chloroprene
• rubber, fluororubber, silicone rubber) or stainless steel (SUS304) fingers
• is available.
• Long strokes selectable.

• A vertically compact configuration has been achieved through the use of
• a rotary actuator as the drive force source.
• Repeatability: 0.01 mm
• Supports class 10 clean room.
• With auto switch (Series MDHR2: MDHR2)

The robot hand tools change automatically to accommodate workpiecesof different shapes, thus making it possible to adopt the FMS (flexible
manufacturing system) in the assembly line.

Rack & Pinion Style- A unique seal construction resulting in shortened overall length and dust
proofing countermeasures allow it to be used for removing workpiecesfrom machine tools or for holding workpieces.

• New cylinder body allows small auto switches to be mounted on 4 surfaces.
• Strong and stable gripping force can be obtained through the toggle mechanism.
• Holds workpiece even when the air is shut down. (Safety measures)

• Can cool high temperature compressed air from compressors down to40C or less and efficiently remove moisture from the air.
• Stable operation is possible even in an environment with a hightemperature, high moisture and heavy foreign particles for this watercooled type.

• Can cool high temperature compressed air from compressors down to40C or less and efficiently remove moisture from the air.
• Cooling equipment is not required for this air cooled type.
• Maintenance is easy and the running cost is reasonable since this is freefrom concerns such as water supply cut-off or freezing.

• Compliant with Chinese pressure vessel regulations
• Technical specification for safety regulation: TSG R0003-2007Simple Pressure Vessels Safety and Technical Supervision Regulation

• Regulation Compliant ProductSafety Technical Supervision Regulations for Safety valves TSG ZF001-2006
• Compact air tank that can be directly connected with booster regulators.

• Prevents condensation in piping for small cylinders/air grippers.
• Diffuses water vapor in the piping to the outside.
• All you have to do is install the moisture control tube. Additional powersupply and works are not necessary.

Can separate and remove oil mist and remove solid particles such as rustor carbon of 0.3 m or larger.

Cartridge typeStraight Clean Gas Strainer SFB200

• Reduced piping man-hours/Space-saving
• Integration of devices in compact space
• Short-pitch mounting is possible.

Centralized pressure control is achieved with compact design.

• Parts in contact with fluid: Grease-free

• Clean equipment modularized (Reduction of piping labor/Space-saving)

Clean air is easily available.

• Nominal filtration rating: 0.01 m (Filtration efficiency 99.99%)
• Wetted parts: Grease-free, Silicone-free
• Assembled in a clean room, shipped and packed in a duplicate package
• 24 combinations available

Higher resistance to foreign matter
Increase in condensate discharge
Drain discharge: Max.100 cm3/cycle (3 times compared with the current model)
Better environmental resistance: Transparent bowl guard can protect the inner bowl!
Better visibility: 360
reduced the weight by 22%
Reduced required maintenance space
Easier maintenance
One-touch mounting and removal of the bowl is possible without using a tool
Bowl material can be selected according to the operating environments

• Easy maintenance.-Possible to maintain easily without removing pipes.
• No need for electric power and no waste of air.

Float style drain allows automatic draining without electric power.

• The pressure differential at the inlet and the outlet of compressed airequipment can be viewed at a glance on the pressure differential gauge.
• It is ideal for the maintenance control of filters.
• Can be installed easily by merely providing a bypass circuit.
• Provided with a protective cover to prevent hazards.

Easy replacement of the element

• The element and the bowl are in one piece. Replacement can be done in hand.
• Energy saving regulator
• Pressure drop: Max. 50% improvement
• Reduced required maintenance space: Max. 46% reduction
• Better visibility & safer
• The bowl is covered with a transparent bowl guard.
• Attachment
• Spacer : Y200-A, Y300-A, Y400-A, Y500-A
• Spacer with bracket : Y200T-A, Y300T-A, Y400T-A, Y500T-A