Our Products
The HEATEX-845CR Multifunctional Rework station was developed to meet the present and future needs of the electronic industry, Service / R&D engineers and the hobbyist. The multiplication ability of this station makes it ideal for use in situations where the maximum amount of flexibility is required. The station has an inbuilt pump to provide the air movement for the hot air gun and the vacuum for the desoldering tool and can be used to rework both surface mounted and through hole components. The 845CR control unit is the base a microprocessor controlled system to regulate the solder processes.
SYSTEMS INCLUDES :
FEATURES :
Features :
FEATURES :
Features :
Features :
Features :
Application :
This is an ultra wide-range, battery operated, portable instrument for measuring Surface Resistivity of virtually any flat surface. In the circuit industry, products such as packaging materials, component storage bags and trays, workbench surfaces, table and floor mats, conveyor belts, etc., have resistance values which need to conform to stringent specifications. Moreover, these values are expected to fall within specified limits. The Surface Resistivity meter can play a vital role in monitoring and checking the resistivity characteristic of the above items.
It also has a unique additional feature of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined.
The surface resistivity is conveniently indicated by a row of LEDs covering a total of 10 decades from 10^3 to 10^13 ohms/square.
Wrist straps and ESD footwears are the first lines of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time, the wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/footwear regularly.
In order to protect sensitive electronic components, the maximum wrist strap resistance should not be more than 10 meg ohms and footwear resistance should not be more than 35 Mega ohms. On the other hand, the resistance should not be less than 0.75 Mohm as protection to the wearer from dangerous levels of voltage and current flow. The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or footwear to the foot. It clearly indicates whether or not the wrist strap/footwear system is safe to use.
Pass Range | Wrist strap 0.75 to 10.0 meg ohm. Footwear 0.75 to 35.0 meg ohm. |
Range selection | by Slide Switch 10 meg ohms - Wrist Strap 35 meg ohms - ESD Footwear / Heel & Toe strap. |
Indications | Pass - GREEN LED Fail - RED LEDS Audible Alarm for Fail mode. |
Actuation | By gently pressing metal sensor plate |
Accuracy | ± 10% |
Power requirement | 9 V DC battery |
Low Battery | Warning less than 7 volts |
Dimensions | 125 x 75 x 29 mm |
Weight | 200 grams |
Calibration | Recommended every 12 months |
Traceability | To national standards |
Warranty | 12 months |
As per ANSI/ESD S20:20 all conductors including Personnel must be electrically connected and attached to a known ground.
A common question about anti-static wrist straps is how and where to ground them. Anti-static workstation operators need a convenient method of grounding their wrist straps where the ground cord wont get in the way of their work. This convenient device provides the means to ground anti-static wrist straps at your workstation.
The strong bracket mounts (with just 2 screws) to the bottom front edge of your work table or bench. Two banana sockets located in the front of the bracket allow for easy connection of two wrist strap cords (for operators working side by side).
Features :
he Model Z107 has independent circuitry designed to continuously monitor the connections to earth of the Wrist Strap and Work Surface.
WRIST STRAP
This section continuously monitors the wriststrap to detect loss of continuity between operator and monitor. Conditions such as broken coil cords and improper contact with the skin are detected instantly to alert the operator before serious and expensive ESD damage can occur. As there is no resistive return path from the wriststrap, it uses the 'Capacitive AC principle' to check if the operator is adequately grounded. The Wrist Strap section is automatically activated when it is plugged in. Continuous monitoring reduces the need for periodic checks and audits and also ensures greater security.
WORK SURFACE (MAT)
The work surface is monitored by a DC Resistive loop and a warning is given in case the Surface-to-Ground resistance exceeds the safe threshold value of 10 megohms
Pass Threshold | under 10 Megohms for Wrist Strap. |
under 10 Megohms for MAT | |
Indications | Pass - Green LED |
Fail - Flashing Red LED for Wrist Strap Steady Red LED for MAT Audible Alarm for Fail mode. |
|
Power supply | 6VDC 100ma |
Dimensions | 110 x 60 x 32 mm |
Weight | 75 gms |
Calibration | Recommended every 12 months |
Warranty | One year |
The Electrostatic Alarm Z201 is a portable, battery-operated instrument, incorporating the latest technology, to indicate the presence of approaching static electricity. It is designed to provide a quick and convenient method of locating static charges and their approximate charge levels. It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby.
The hazard may be in the form of personnel who are generating static or personnel who may be holding a charged object without observing the standard safety procedures for handling static sensitive devices.
The instrument incorporates a unique self-resetting feature and therefore requires no manual adjustments or zeroing. It can be kept 'ON' for continuous monitoring of critical static-safe areas, thanks to its remarkably low current drain of only 1 ma.
THEORY OF OPERATION
A static charge on an object produces an electric field whose strength is an inverse function of the distance from the charge. A given magnitude of charge always produces a given field strength at a given distance. The unique sensor of the instrument actually responds to this electric field. However, more specifically, it senses only changes in the electric field, so to detect a charge there should be relative motion between the instrument and the charged body.
This instrument is designed to detect the level of Static Charges present on a human body and allow access into an ESD safe area provided the Body Static voltage is under 100V. It is very simple to use and only requires the personnel to Press & Hold the Test Button on the instrument. If the Body voltage is under 100V, the Green PASS Led will light and the magnetic lock is deactivated for a few seconds thereby allowing access through a door or turnstile.
The personnel should normally be free of Static Voltage provided proper ESD protection measures have been taken. Therefore, it also serves to verify whether the measures are taken to make a particular area ESD safe are effective. By such measures we mean conductive flooring, ESD wrist straps & Footwear, ionizing equipment, etc.
This instrument is designed to measure the Static Voltages carried on a human body. It is a good auditing tool to verify whether Personnel entering an ESD safe area are carrying any hazardous charges on themselves. It can also serve to verify whether all the ESD protection measures which have been taken to make a particular area ESD safe are effective. By such measures, we mean conductive flooring, antistatic table mats, wrist straps, static shielding bags, ionizing equipment, conductive containers and bins etc.
It is very simple to use and only requires the personnel under test to touch the Button on the instrument and directly read the charge level in volts on the meter.
The Grounding PALMPLATE is a convenient and quick solution to ensuring that there is no charge on the Human Body before entering any ESD safe area. It has a conductive Stainless Steel electrode plate mounted onto an acrylic backing.
The plate can be mounted on the wall at a convenient height and the personnel have to just touch the plate to drain any charge from the body.
The Plate is supplied with a Grounding cord which needs to be connected to any ESD earth point. A 2.2 megohm resistor is provided in the ground cord as a precaution against the risk of shock.
This is designed to safely drain away any static charges present on a Human body before entering an ESD safe area. A 1 megohm resistor is provided in the ground cord as aprecaution against the risk of shock.
Ground the stand to a suitable ESD ground point by means of the cord. Stand on the Base Plate while wearing the Conductive / Static Dissipative Footwear and also touch the top plate. Any static present on the body will get drained away.
Note: For outstation supplies to facilitate transport, the Stand will be sent in a dismantled condition. The 3 parts namely the top touch plate, base and the vertical rod have to be re-assembled and secured by means of the appropriate bolts and fasteners supplied.
The generation and accumulation of unwanted electrostatic charges, both surface and airborne, poses a serious problem in various industries and processes. For example, static charges can lead to sticking and crumpling of polyester films while being processed on the machines. Collection of dust and other particulate contaminants on surfaces due to static is another example. The discharge bars and the power supply are used primarily in cases where disruptive static charges on fast moving material webs impair production processes and need to be eliminated.
How it works
This static eliminator works on the principle of high voltage corona discharge, to produce the neutralising ions. This Static eliminator system is designed to neutralize the charges by the Ion showering process wherein the surface charges present are neutralised. It is designed for continuous use and the unique Shockless bars ensure total safety even if the electrodes are accidently touched.
APPLICATION AREAS
Plastic film and paper industries, Glass related industries Textile Industries, Pharmaceutical industry, Clean rooms.
The generation and accumulation of unwanted electrostatic charges, both surface and airborne, poses a serious problem in various industries, work areas & laboratories. For instance, static charges can cause havoc in the electronic assembly shopfloor. This OVERHEAD unit can be conveniently hung over the work area for a large coverage to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of ionized air. "Ion showering" is the only effective method of removing static charges from non-conductive objects and surfaces. The unique high-efficiency pulse circuitry provides fast discharge with limited air flow. It works on the principle of high-voltage corona discharge to produce the neutralising ions.
Ion Balance is maintained irrespective of supply voltage and even if the discharge electrodes are dirty. Balanced output is essential when used in critical ESD sensitive areas.
APPLICATION AREAS
ESD sensitive work areas and assembly units.
Plastic and paper industries
IT & Computer industry
Clean rooms.
FEATURES:Surely and easily Temperature control
Suitable for Lead-Free Solder
AUTO SHUT-OFF FUNCTION
If no measurement operation is performed within 3 minutes, the power will be automatically shut off.
MAX HOLD FUNCTION
When the button "MAX HOLD" is pressed, "MAX HOLD" will be displayed and the highest temperature of Iron will be held in the display
FEATURES :
SYSTEMS INCLUDE :
FEATURES :
The Insulation Remover manufactured by us effectively removes insulation from wires that can later be employed for a variety of purposes. Our Insulation Remover neatly strips the wire without leaving any residue material on the wire. The Insulation Remover has been designed by in-house experts to provide unmatched, error-free performance for a long time.
FEATURES ESD SAFE BY DESIGN :
OPTIONAL WIRE BLADES :
Operation :Handle will operate on the principle of crocodile Clip, i.e., by pressing the rear side of the handle the front side element holder will wide open.
Lock :Elements fixed on the studs will get hooked each other in a loop such that the wire will get locked in between the loop to strip the sleeve.
DESCRIPTION :
We are involved in the offering of high quality Digital Soldering Pot that come from premium quality raw materials laid out by our trusted vendors and suppliers. Our assortment has seen extremely high demand owing to its high quality output and reasonable pricing.
TECHNICAL SPECIFICATIONS :
MECHANICAL DIMENSIONS :
Pot dimensions : 45Dia x 45mm Depth
Weight: 300grms.
FEATURES :
Category :Component pre-forming machines
FEATURES : Manual Operation
The wire stripper machine with a brush will strip flat and round enamel wires with any of film, insulation and varnish. The wire enamel brushes with high r.p.m. remove the insulation without damaging the wire conductor. This machine can strip multiple wires at a time. This machine is ideal for the production and repair of stripping of the armature, coils, chokes, transformers, relays. etc.
USAGE :
This equipment can be used for continuous Production
DESCRIPTION :
SPECIFICATIONS:
APPLICATION RANGE :
FEATURES:
FEATURES :
ACCESSORIES:Instruction Manual, Carrying Case, Battery
MODELS | KM-LUX-99 | KM-LUX-100K | KMK-LMU-XL-U2X00-2K00K |
Display | 3½ digit,18mm(0.7”) LCD | 3½ digits LCD Display | 3½ digits LCD Display |
Range | 0-2,000 / 20,000 / 50,000 Lux | 0-2,000 / 20,000 / 1,00,000 Lux | 0-200 / 2,000 / 20,000 / 2,00,000 Lux, 0-20/200/2,000/20,000 FC |
Resolution | 1 / 10 / 100 Lux | 1 Lux | 0.1 Lux |
Accuracy | ± (5% rdg + 2 dgts) | ≤10,000 Lux : ± 4%rdg ± 0.5 f.s. | ≤20,000 Lux : ± 3%rdg ± 0.5 f.s. |
> 10,000 Lux : ± 5%rdg ± 10digits | > 20,000 Lux : ± 5%rdg ± 10dgts | ||
Over-range | Indication of “I” | Indication of “I” | Indication of “I” |
Sampling Time | 0.4 second | 0.4 second | 0.4 second |
Sampling Frequency | 0.2 times / sec | 0.2 times / sec | 0.4 times / sec |
Operating Temperature | 0o to 50oC. (32o-122oF) | -10oC to 40oC.(32oF~104oF) | 0oC to 40oC.(32oF~104oF) |
Operating Humidity | Less than 80% R.H. | Less than 70% R.H. | Less than 80% R.H. |
Repeatability | ± 2% | ± 2% | ± 2% |
Temperature Characteristic | ± 0.1% / oC | ± 0.1% / oC | ± 0.1% / oC |
Peak Hold | No | No | Yes |
Display In Foot Candle (fc) | No | No | Yes |
Angle deviation from cosine characteristics |
No | No | Yes |
Data logging | No | No | No |
USB interface | No | No | No |
Power Supply | DC 9V Battery Consumption current approx. 2mA | ||
Dimension | 118(L) x 70(W) x 29(H)mm | 230(L) x 72(W) x 30(H)mm | 149(L) x 71(W) x 41(H)mm |
Weight | Approx. 200g (including Battery) |
Approx. 190g (including Battery) |
Approx. 250g (including Battery) |
The flooring with continuous diamond field design is for excellent traction and easy cleaning. Non-staining, non-discoloring mat is used for both indoor and outdoor purpose. Diamond design is ideal for ramps, trailers, golf club bridge aprons, marine areas, building access points, wheeled vehicles, trolleys, etc. Being fully weatherproof it can be used either indoors or outdoors. Diamond design matting is manufactured from top quality rubber compounds giving high non-tear qualities, offering exceptional wear and grip characteristics and surefootedness.