Write a Review
Our Products
Our Complete range of products are Wave Soldering Machine, Electrical Insulating Mat, COMMON GROUND POINT, Electrostatic Alarm and STATIC DISCHARGE PALMPLATE.
As per ANSI/ESD S20:20 all conductors including Personnel must be electrically connected and attached to a known ground.A common question about anti-static wrist straps is how and where to ground them. Anti-static workstation operators need a convenient method of grounding their wrist straps where the ground cord wont get in the way of their work. This convenient device provides the means to ground anti-static wrist straps at your workstation.The strong bracket mounts (with just 2 screws) to the bottom front edge of your work table or bench. Two banana sockets located in the front of the bracket allow for easy connection of two wrist strap cords (for operators working side by side).
Features :
The Electrostatic Alarm Z201 is a portable, battery-operated instrument, incorporating the latest technology, to indicate the presence of approaching static electricity. It is designed to provide a quick and convenient method of locating static charges and their approximate charge levels. It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby.The hazard may be in the form of personnel who are generating static or personnel who may be holding a charged object without observing the standard safety procedures for handling static sensitive devices.The instrument incorporates a unique self-resetting feature and therefore requires no manual adjustments or zeroing. It can be kept 'ON' for continuous monitoring of critical static-safe areas, thanks to its remarkably low current drain of only 1 ma.
THEORY OF OPERATION
A static charge on an object produces an electric field whose strength is an inverse function of the distance from the charge. A given magnitude of charge always produces a given field strength at a given distance. The unique sensor of the instrument actually responds to this electric field. However, more specifically, it senses only changes in the electric field, so to detect a charge there should be relative motion between the instrument and the charged body.
The Grounding PALMPLATE is a convenient and quick solution to ensuring that there is no charge on the Human Body before entering any ESD safe area. It has a conductive Stainless Steel electrode plate mounted onto an acrylic backing.The plate can be mounted on the wall at a convenient height and the personnel have to just touch the plate to drain any charge from the body.The Plate is supplied with a Grounding cord which needs to be connected to any ESD earth point. A 2.2 megohm resistor is provided in the ground cord as a precaution against the risk of shock.
This is designed to safely drain away any static charges present on a Human body before entering an ESD safe area. A 1 megohm resistor is provided in the ground cord as aprecaution against the risk of shock.
Ground the stand to a suitable ESD ground point by means of the cord. Stand on the Base Plate while wearing the Conductive / Static Dissipative Footwear and also touch the top plate. Any static present on the body will get drained away.
Note: For outstation supplies to facilitate transport, the Stand will be sent in a dismantled condition. The 3 parts namely the top touch plate, base and the vertical rod have to be re-assembled and secured by means of the appropriate bolts and fasteners supplied.
Category :Component pre-forming machines
FEATURES : Manual Operation
SARA MECHATRONIX (SARA MECHATRONIX)
Akurdi, Pune - 411019, Dist. Pune, Maharashtra - 411035, India
Share us via
