Ahmedabad, Gujarat, India
Our Products
PRODUCT:
The "Saumya" COF tester is designed to determine the co-efficient of friction of plastic films, sheets, laminates, pipes and paper etc. |
| STANDARDS: |
ASTM D-1894, BS 2782 and other equivalent standards. |
| APPLICATIONS: |
The co-efficient of friction are related to the slip properties of plastic films, sheets, and laminates etc. that are of wide interest in packaging industries. |
Model No.
| COF- A | COF- B (Computerised) | |
| Speed | Variable with DC drive | Variable with DC drive |
| Digital Indication | Load and speed | LCD Indication of Load and speed |
| Interface Port | -- | RS 232 port connection to computer |
| Software | -- | Window based versatile software |
| Body | S.S. moving platform and M.S with powder coating | S.S. moving platform and M.S with powder coating |
| Power Supply | 230V AC, 50Hz | 230V AC, 50Hz |
| Dimension | 30" X 12" X 12" | 30" X 12" X 12" |
| Net Weight | 45 Kgs. | 45 Kgs. |
Carbon black Content Test as per IS 2530 to test percentage of carbon Content in plastic material. This test method is used to determine the average carbon black content in materials like plastic pipes, films, sheets, cables, water tanks.Compact furnace to get temperature up to 800 C with microprocessor based PID controller.
Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking.
The "Saumya" UTM gives highly accurate force measuring system with hi-tech design and is available in different models for testing a variety of materials. Load cells, grips, fixtures can be interchanged easily to perform different tests like Flexural, Compression, Co-efficient of Friction, Peeling and bonding strength.
STANDARDS : |
ASTM D 638, D 882, D 790, D 695, ISO R527, BS 2782 and other equivalent standards. |
| APPLICATIONS: |
Tensile is the universal test applied to many polymers to check the mechanical properties & it is the most important property as majority of end use application involved some degree of mechanical loading & properties like Tensile modulus, Elongation, Compression etc. are calculated using this machine. For woven sack tanacity will be directly displayed. |
USP: |
| The "Saumya" has some unique models developed with versatility in mind. "Saumya" UTM's can be used with or without using P.C. Universal software capable of performing test on any type of materials. Safety provisions in form of software, Electrical & Mechanical features. Test on high & low loads with different cross-head travel speed can be performed. The "Saumya" tensile offers testing flexibility and ease of use via an intelligent electromechanical system data transfer ratio of load cell to instrument is 24 bits to give instatenuoes readout of data during process. The "Saumya" versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape meterials can be pre specified on specification window for direct calculation of area. |
The Equipment is known as Universal Tensile Tester, Computerised Universal Tensile Tester, Automatic Universal Tensile Tester, Plastic Universal Tensile Tester, Universal Testing Machine for Plastic Lab, Tensile Strength Tester, Plastic Tensile Test Measurement Machine, Twin Screw Tensile Tester, Tensile with Compression Tester, Plastic Film Tensile Tester, Plastic Maximum Tensile Strength Measurement, Universal Materials Testing Machines, Plastic Material Testing Machine, Universal Tester, etc.
This procedure is used for measuring the tear strength of the thermoplastic films or non-rigid sheet. By this test method, we determine the average force to propagate tearing through a specified length of plastic film or non-rigid sheeting.
This test method is of value in ranking relative tearing resistance of various plastic film and this sheeting of comparable thickness.
| USP: |
It consists of stationary & movable clamp Stopper for holding the pendulum in a raised position & releasing it instantaneously. Indicating device for taking the reading of pendulum swings when released. Template die or shear type cutter for cutting specimen. |
The Equipment is known as Tear Strength Tester, Tensile & Tear Strength Test Equipments, Tear Resistance Tester, Digital Tear Strength Tester, Tear Strength Testing Machine, Plastic Film & Sheet Tear Strength Test Equipment, Plastic Lab Sample Tear Strength Tester, etc.
"Saumya" Top Load Tester have various test application in plastic Industries application : It is a digital Microprocessor based control system used to check the buckling strength of PET bottles.It replaces huge tensile mc. if you want only compressive strength of any rpoduct it can be used as a pushpull gauge also.
