Our Product / Services
Aluminum purity, minimum 99.99% and wire diameter 0.5mm & above. Tensile strength 12 to 14 kg/mm2 & Elongation over 3%
Aluminum purity, minimum 99.90% and wire diameter 0.5mm & above. Tensile strength 14 to 16 kg/mm2 & Elongation over 3%
Chemical Composition (Typical)
Elements Grade | %SI (Max) |
%Fe (Max) |
%Cu (Max) |
%Mn (Max) |
%Mg (Max) |
%Zn (Max) |
%Ti (Max) |
%Cr (Max) |
%B (Max) |
%V (Max) |
%Ga (Max) |
%Al |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1080 Grade | 0.05 | 0.1 | 0.01 | 0.01 | 0.02 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.04 | 99.80 to 99.89 |
1090 Grade | 0.05 | 0.07 | 0.01 | — | — | 0.03 | 0.02 | — | — | — | — | 99.90 to 99.95 |
1199 Grade | 0 | 0 | 0.01 | — | — | 0 | 0 | — | — | — | — | 99.990 to 99.995 |
Mechanical Properties
Tensile Strength – Typical | 1080 Grade : 16 to 18 Kgs I Sqmm = 150mpa to 180mpa 1090 Grade : 14 to 16 Kgs I Sqmm = 140mpa to 160mpa 1099 Grade : 12 to 14 Kgs I Sqmm = 120mpa to 140mpa |
---|---|
Elongation | Over 3% |
Dimensional Tolerance in 0 | +/- 0.02mm |
Temper | H18 |
Certified that the wire is joint free | Yes |
Aluminum purity, minimum 99.80% and wire diameter 0.5mm & above. Tensile strength 16 to 18 kg/mm2 & Elongation over 3%