Signal Generator as a multiple out and measurement including voltage, currentand thermocouple with LCD screen and silicon key pad.Simple opration, long service time, high accuracy & programmable output. It is widely used in LAB, industrial field, PLC process instruments, Electrical valve and other area's.

• handheld, battery operated, portable source and sink for mv, ma, & rtd(pt 100 din 43760)
• uni calibrator pt 100 reading directly in terms of temperature.
• uni calibrator independent calibration facility for mv, ma, ohm, temp.
• typical accuracy 0.1% 1 digit
• optional battery eliminator for operation on 230v ac
• uni calibrator optional portable loop power supply for 2 wire transmitter calibration.

SBK Instrus Process Controller Model PC 300 Series suppliers accepts inputs from RTD, Thermo couple, mV, mA and thuscovers most of the Sensors and transmitters. Process Controller Model PC 300 Series supplier instrument can be used for various , applications covering process parameters like temperature, pressure, PH , level, flow, Speed etc. Our study for Process requirements enabled us to provide various optional , features such as, Cascade, Retransmission output Transmitter Powering , Time , Proportional action etc.You can select following options depending on your application and requirement

• Customer friendly.ProcessController Model PC 300 Series suppliers
• Wide acceptance for various inputs
• Time Proportional Control action-Process Controller Model PC 300 Series suppliers
• Re-transmission Output.
• Transmitter Powering facility-Process Controller Model PC 300 Series suppliers
• Cascade / Remote Set Point.
• Capability for any non-std .requirement

We makes truly portable and highly reliable mA Simulator which can be used for mA Source and Sink facility is built in. The Simulator is designed to suit Instrumentation Lab as well as field calibration. This can be used as better tool for trouble shooting and confirmation of instrument.Hence very useful for Commissioning, Quality assurance, Routing Maintenance.

• Hand held, Battery operated, Portable Source mA and Sink mA as per requirement.
• Typical Accuracy 0.1% 1 digit
• Optional battery eliminator for operation on 230VacmA Simulator suppliers
• Maximum load 500
• mA Output range 0-25 mA
• mA Measurement Range 0-19.99mAmA Simulator suppliers
• Facility for quick Calibration using selector switch
• Functional Description mA Simulator suppliers
  1. Power ON :This switch powers the instrument when switched ON
  2. Mode :Source (Generation) or Sink (Measurement) with Toggle switch.
  3. Battery Eliminator :(Optional) This facility is provided in the calibrator to suit the operation on 230Vac 50 Hz 10%. As soon as you connect eliminator Socket, batteries get disconnected automatically & vice versa.
  4. Battery Replacement:When Low Bat Indication appears on DPM, the discharged batteries must be replaced, otherwise the accuracy will not be achieved. For mA Simulator supplierreplacing battery, remove side bottom plate & then slide out the bottom plate on which battery is firmly placed.
  5. mA Simulator :Can be calibrated easily. Remove the top plate. Potentiometer for Zero and Span are easily accessible.
  Application
  • mA Simulator for calibration of process control instruments and systems for various industries such as cement, Chemicals, Dyestuff, Paint, Drugs, Pharmaceuticals, Sugar, Paper, Glass, Food Industries, Steel, Synthetics, Auto, Air Conditioning and Refrigeration.mA Simulator suppliers
  • As fault finding tool.
  • Quality Assurance tool for ISO 9000, QS 2000 companies for control of Inspection & Measurement.
  1. Quick Calibration:Selector Switch can be set for 4, 8, 12, 16, 20 mA to get appropriate output in Source Mode
  mA Simulator suppliers

mA Voltage Simulator makes truly portable and highly reliable mA Simulator which can be used for mA Source and Sink facility. The Simulator is designed to suit Instrumentation Lab.This can be used as a better tool for troubleshooting and confirmation of instrument.Hence very useful for Commissioning, Quality assurance, Routing Maintenance.

• Source mA and Sink mA as per requirement
• Typical Accuracy 0.2% 1 digit
• Operation on 230Vac
• mA Voltage Simulator Maximum load 500
• mA Output range 0-25 mA
• mA Voltage Simulator mA Measurement Range 0-19.99 mA

• For calibration of process control instruments and systems for various industries such as cement, Chemicals, Dyestuff, Paint, Drugs, Pharmaceuticals, Sugar, Paper, Glass, Food Industries, Steel, Synthetics, Auto, Air-Conditioning, and Refrigeration.
• As fault finding tool.mA Voltage Simulator suppliers
• Quality Assurance tool for ISO 9000, QS 2000 companies for control of inspection & Measurement.

We offer high quality Controller Series 300 which are made in our advanced facility using latest technology and programmed with the latest software. Predominantly used in areas where process indication is of critical importance, especially in industries where process parameters like temperature, liquid levels, pressure levels and speed play an important role in the quality of the output. The Controller series 300 is essential where temperature sensors and other transmitters are used. We are an established manufacturer and supplier of Controller Series 300 from Maharashtra, India.

Optional Features :

• One / Two Set
• T.P. Action Control

• mV, mA, T/C, PT100 Input
  • One / Two /Four Set
  • T.P. Action Control (Optional)
  • Re-transmission (Optional)
  • 24 V Power Supply (Optional)
  • Cascade / Remote Set (Optional)

4½  digit with PC 302 Features :

• mV, mA, T/C, PT100 Input
  • One / Two /Four Set
  • T.P. Action Control (Optional)
  • Re-transmission (Optional)
  • 24 V Power Supply (Optional)
  • Cascade / Remote Set (Optional)

 Application :

• Process
• Indication using
• Temperature
• Sensor & various
• Transmitters
• Control of Process
• Parameter like
• Temperature,
• Pressure, Level
• Flow, Speed, etc

We offer superior quality auto scanners, precision made using the latest available technology. The Auto scanner 701 that we offer helps in interfacing with automotive modules to scan and diagnose faults if any. If needed they also help in reprograming these modules. These 701 auto scanners have indication at 8 different points for scanning and use separate sensors to classify the high and low alarms. Based in Maharashtra, India, we are a top-notch manufacturer and supplier of Auto Scanner 701.

Optional Features :

• 8 Channel with Auto / Manual
• Alarm / Trip Control
• Sensor open indication
• Miniature size 96x96x150mm
• T/C, PT100, mA, mV with single Input

We offer high precision Electrical Transmitters, which are widely used in industries where processed need to be controlled to the minutest degree. These electrical transmitter we offer help in managing and controlling processes remotely or from site by indicating process levels, aiding in optimal control and recording data for analysis and improvements in process management. Based in Maharashtra, India we are a well-known manufacturer and supplier of electrical transmitters.

Input :

• Pt 100/TC, P.S. - 24Vdc
• Output - 4 -20mA
• Pt 100/TC, P.S.: 24VdcOutput  - 4-20mA
• Pt 100/TC, P.S.: 230Vac
• Output  - 4-20mA
• mV/mA –Standard
• Pt100/TC/AC DC Voltage (Optional)
• P.S. - 230Vac or 24Vdc (Optional)

Application :

• For process
• Control
• Application
• Transmitter are
• Used for long
• Distance
• Indication /
• Control / Record /
• Data analysis

Signal Generator as a multiple out and measurement including voltage, currentand thermocouple with LCD screen and silicon key pad.Simple opration, long service time, high accuracy & programmable output. It is widely used in LAB, industrial field, PLC process instruments, Electrical valve and other area's.

• handheld, battery operated, portable source and sink for mv, ma, & rtd(pt 100 din 43760)
• uni calibrator pt 100 reading directly in terms of temperature.
• uni calibrator independent calibration facility for mv, ma, ohm, temp.
• typical accuracy 0.1% 1 digit
• optional battery eliminator for operation on 230v ac
• uni calibrator optional portable loop power supply for 2 wire transmitter calibration.

SBK Instrus Process Controller Model PC 300 Series suppliers accepts inputs from RTD, Thermo couple, mV, mA and thuscovers most of the Sensors and transmitters. Process Controller Model PC 300 Series supplier instrument can be used for various , applications covering process parameters like temperature, pressure, PH , level, flow, Speed etc. Our study for Process requirements enabled us to provide various optional , features such as, Cascade, Retransmission output Transmitter Powering , Time , Proportional action etc.You can select following options depending on your application and requirement

• Customer friendly.ProcessController Model PC 300 Series suppliers
• Wide acceptance for various inputs
• Time Proportional Control action-Process Controller Model PC 300 Series suppliers
• Re-transmission Output.
• Transmitter Powering facility-Process Controller Model PC 300 Series suppliers
• Cascade / Remote Set Point.
• Capability for any non-std .requirement

We makes truly portable and highly reliable mA Simulator which can be used for mA Source and Sink facility is built in. The Simulator is designed to suit Instrumentation Lab as well as field calibration. This can be used as better tool for trouble shooting and confirmation of instrument.Hence very useful for Commissioning, Quality assurance, Routing Maintenance.

• Hand held, Battery operated, Portable Source mA and Sink mA as per requirement.
• Typical Accuracy 0.1% 1 digit
• Optional battery eliminator for operation on 230VacmA Simulator suppliers
• Maximum load 500
• mA Output range 0-25 mA
• mA Measurement Range 0-19.99mAmA Simulator suppliers
• Facility for quick Calibration using selector switch
• Functional Description mA Simulator suppliers
  1. Power ON :This switch powers the instrument when switched ON
  2. Mode :Source (Generation) or Sink (Measurement) with Toggle switch.
  3. Battery Eliminator :(Optional) This facility is provided in the calibrator to suit the operation on 230Vac 50 Hz 10%. As soon as you connect eliminator Socket, batteries get disconnected automatically & vice versa.
  4. Battery Replacement:When Low Bat Indication appears on DPM, the discharged batteries must be replaced, otherwise the accuracy will not be achieved. For mA Simulator supplierreplacing battery, remove side bottom plate & then slide out the bottom plate on which battery is firmly placed.
  5. mA Simulator :Can be calibrated easily. Remove the top plate. Potentiometer for Zero and Span are easily accessible.
  Application
  • mA Simulator for calibration of process control instruments and systems for various industries such as cement, Chemicals, Dyestuff, Paint, Drugs, Pharmaceuticals, Sugar, Paper, Glass, Food Industries, Steel, Synthetics, Auto, Air Conditioning and Refrigeration.mA Simulator suppliers
  • As fault finding tool.
  • Quality Assurance tool for ISO 9000, QS 2000 companies for control of Inspection & Measurement.
  1. Quick Calibration:Selector Switch can be set for 4, 8, 12, 16, 20 mA to get appropriate output in Source Mode
  mA Simulator suppliers

mA Voltage Simulator makes truly portable and highly reliable mA Simulator which can be used for mA Source and Sink facility. The Simulator is designed to suit Instrumentation Lab.This can be used as a better tool for troubleshooting and confirmation of instrument.Hence very useful for Commissioning, Quality assurance, Routing Maintenance.

• Source mA and Sink mA as per requirement
• Typical Accuracy 0.2% 1 digit
• Operation on 230Vac
• mA Voltage Simulator Maximum load 500
• mA Output range 0-25 mA
• mA Voltage Simulator mA Measurement Range 0-19.99 mA

• For calibration of process control instruments and systems for various industries such as cement, Chemicals, Dyestuff, Paint, Drugs, Pharmaceuticals, Sugar, Paper, Glass, Food Industries, Steel, Synthetics, Auto, Air-Conditioning, and Refrigeration.
• As fault finding tool.mA Voltage Simulator suppliers
• Quality Assurance tool for ISO 9000, QS 2000 companies for control of inspection & Measurement.

We offer high quality Controller Series 300 which are made in our advanced facility using latest technology and programmed with the latest software. Predominantly used in areas where process indication is of critical importance, especially in industries where process parameters like temperature, liquid levels, pressure levels and speed play an important role in the quality of the output. The Controller series 300 is essential where temperature sensors and other transmitters are used. We are an established manufacturer and supplier of Controller Series 300 from Maharashtra, India.

Optional Features :

• One / Two Set
• T.P. Action Control

• mV, mA, T/C, PT100 Input
  • One / Two /Four Set
  • T.P. Action Control (Optional)
  • Re-transmission (Optional)
  • 24 V Power Supply (Optional)
  • Cascade / Remote Set (Optional)

4½  digit with PC 302 Features :

• mV, mA, T/C, PT100 Input
  • One / Two /Four Set
  • T.P. Action Control (Optional)
  • Re-transmission (Optional)
  • 24 V Power Supply (Optional)
  • Cascade / Remote Set (Optional)

 Application :

• Process
• Indication using
• Temperature
• Sensor & various
• Transmitters
• Control of Process
• Parameter like
• Temperature,
• Pressure, Level
• Flow, Speed, etc

We offer superior quality auto scanners, precision made using the latest available technology. The Auto scanner 701 that we offer helps in interfacing with automotive modules to scan and diagnose faults if any. If needed they also help in reprograming these modules. These 701 auto scanners have indication at 8 different points for scanning and use separate sensors to classify the high and low alarms. Based in Maharashtra, India, we are a top-notch manufacturer and supplier of Auto Scanner 701.

Optional Features :

• 8 Channel with Auto / Manual
• Alarm / Trip Control
• Sensor open indication
• Miniature size 96x96x150mm
• T/C, PT100, mA, mV with single Input

We offer high precision Electrical Transmitters, which are widely used in industries where processed need to be controlled to the minutest degree. These electrical transmitter we offer help in managing and controlling processes remotely or from site by indicating process levels, aiding in optimal control and recording data for analysis and improvements in process management. Based in Maharashtra, India we are a well-known manufacturer and supplier of electrical transmitters.

Input :

• Pt 100/TC, P.S. - 24Vdc
• Output - 4 -20mA
• Pt 100/TC, P.S.: 24VdcOutput  - 4-20mA
• Pt 100/TC, P.S.: 230Vac
• Output  - 4-20mA
• mV/mA –Standard
• Pt100/TC/AC DC Voltage (Optional)
• P.S. - 230Vac or 24Vdc (Optional)

Application :

• For process
• Control
• Application
• Transmitter are
• Used for long
• Distance
• Indication /
• Control / Record /
• Data analysis