Magnet Power Supplies Modular system, parallel operation to increase output power possible, Controller configurationload balancing possible, Trigger input for measurements signals, Output short-circuit and open-circuit proof, Various voltagecurrent combinations.
Ideal Signal Source for Audio and Test Application, Compact & Light in weight, Digital Frequency Display, Trigger Output, Very Low Sine Distortion, Operating Modes : Sine and square wave
Save Data to Database for comparison, Supplied with all accessories and carry case, 50Ohm or High Impedance Input, Save Data to external USB, Leading Phase Accuracy, PC Software package included
IR-860 is specially designed for SMDBGA rework and also very convenient for re-balling smaller BGA components, SolderLight - Temperature display (3 segment) IR Hand tool intensity.RESET- Offset frontward counting
Solar Array Simulator Photovoltaic Power Profile Emulation
Solar Array Simulator Photovoltaic Power Profile Emulation There are three methods to generate a power profi le in the PPPE software: Automatic voltage current profi le calculation from reference parameters.
SMD Probe for LCR Meters very difficult to handle and make any measurements. Scientific offers SMD Probes for LCR Meters, these are uniquely designed to be used with SMD components & single hand operations.
Bi-directional Power Supplies Maximum Power : 15kW (Sink Power is not dissipated but fed back into the grid), Efficiency : >95% (Very low heat dissipation), Protection : Overload & Short Circuit condition, Excellent dynamic response to load changes, Large LCD display, menu driven operations.
Programmable DC Power Supplies Fast Transient Response, Standard Analog Programming. Typical applications where power sinking is required , with option power sink optional, it offer robust solution to application like DC Motors controlled by PWM circuits.
direct input20 Arms (300 Apk) & 1000 Vrms (2500 Vpk)
Power Analyzer High precision internal shunts Superior accuracy to any external shunt, 10 millidegree phase accuracy Necessary for low power factor applications, Unique x10 gain mode for Standby Power measurement, Simple BNC connection of N4L shunts for high current applications, RS232, USB, LAN, Extension and Auxiliary port.
Voltage Interruption Simulator Inrush current measurement at any phase position 0 - 360 Automatic AC + DC ramp function, DC-Test: IEC EN 61000-4-29, Voltage interruption simulator AC + DC ramp function.
Pre-Selectors Installation and operation is completely automatic, and the filters will synchronise with the analyser scan without any operator intervention. A front panel switch allows manual operation if required.
Line Impedance Stabilization Network The unit complies with VDE0876 and CISPR Pu41.16 (band A and B) regulations. And can be operated manually or PC controlled via the built in RS232 interface. It is designed and built using air core inductors to avoid saturation at peak current loads. The unit comprises an artificial hand simulation per ANSIC6.3.4, as well as a PE simulation network (50mH II 50W) which can be bypassed For the protection of sensitive inputs the output signal can be for limited by a switchable transient limiter.
Programmable AC Power Sources Fast Switch on Time: Proprietary Design, DC+AC Output: DC-1kHz (10 kHz small signal bandwidth), Pre Set Waveforms: Stored in hardware for Fast Recall, Custom Arbitrary Waveform, Sequencing and more, Compact Design, High Power Density.
Conducted RF Immunity Test Equpiments Computer-based system (controlled by USB): - Unequalled flexibility, easy operation, fully expandable for future standards modification. Easy integration in automated measurement and test systems, RF-generator, amplifier and RF-voltmeter may as well be used as stand-alone devices, Calibration of coupling decoupling devices is performed automatically:- A mounting plate with 50150 Ohm passage and a calibration adaptor are necessary, depending of the used CDN.
Radiated RF Immunity Test Equpiment LETIS This means that if the test requirement extends both sides of this 1GHz point, the power amplifier needs to be changed over. Generally, this involves three connections. Software issued with the Laplace Synthesisers automatically detects the presence of a LETIS and handles the switching automatically.
Rack Mount Kits to suit varios instruments in oscilloscopes, power supplies, function generators etc. By selecting appropriate 19" Rack Mount Kit , one can easily assemble and use it as and when needed. No special tooling of efforts needed.
Near Field Probe of a passive E field probe and H field probe, BNC adaptor and carry case. The output is via a BNC socket. These are general purpose probes which are ideal for use in conjunction with an EMC measuring system. They are sensitive to sources in close proximity, but are insensitive to background signals. This makes them ideal for the identification of emission frequencies in noisy environments. thus making measurements easier and quicker. The proximity requirement also enables sources to be located and the exit route identified.
Ancilaries can be enhanced by the use of appropriate filters. In particular, broadband noise below the frequencies of interest can cause limiting (compression) in spectrum analysers, distorting the measurements. RF800 pass band filter covers the band B (150KHz - 30MHz), rejecting other frequencies. The pass band attenuation is only 2dB, but the key requirement to attenuate the strong low frequency noise often found in industrial sites exceeds 30dB.
Frequency Response Analyzers Save Data to Database for comparison, Supplied with all accessories and carry case, 50Ohm or High Impedance Input, Truly Portable Measurements, Leading Phase Accuracy.
High Precision Power Supplies Double-stabilized linear control power supply with highest precision, Output voltage up to 600 Volt (for higher voltage see PHN series), Setting of output voltage & current with ten-turn potentiometers, 3.5-digit digital displays for voltage and current, 4.5digit displays on request .
RF Synthesiser The frequency coverage extends from 100 kHz to 230 MHz for conducted tests and 30 MHz - 3 GHz for radiated tests. They are all controlled from the users PC via a USB link, and powerful Windows software is included to enable the user to control all the parameters of the test, to monitor the test in progress, and to view the results.Includes PC (Windows) software to enable very simple operation
Soldering - De-soldering Station 60W Mini Temperature Controlled Soldering Station, Spike-free circuitry for safe soldering of sensitive device, Temperature can be locked with a password code, Soldering iron stand with brass tip cleaner.
Battery Chargers designed to generate a controlled DC output from 12 to 750V. Its main application is the charge and discharge of batteries, or other DC storage systems. It produces important energy savings in battery testing or characterization when regenerating the stored energy to the grid.
MegaPulse Antenna Surge including the 4M ohm load resistor required by IEC 60065. Designed specifically for testing to IEC 60065 Fig. 7, IEC 60950 Annex N and IEC 62368-1 Annex D. The IEC 60065, Fig. 7a, switch S is our IER design, designed and built in compliance with IEC 60065, Fig. 7b. External interlock is supplied as standard equipment.
Active Differential Probes are floated or isolated specially power electronics, circuits with mains floated. To analyze such thpe of signals Differential probes are used. Scientific offers range of Differenetial Probes from Testec Germany to suit your applicaitons.
We are offering modular system series 8000the blank module hm800 is available for your own designs to be integrated with the other measuring instruments. The power supply voltages necessary are available from the mainframe. Especially for schools and training centers the modular system series 8000 offers a cost effective flexible alternative to conventional measuring equipments. As the mainframe hm8001-2 allows the simultaneous operation of two modules in any combination most often a single such basic unit will be all that is needed for a student in a laboratory. The modules necessary will be issued to the students depending on the requirements of the specific exercise. The modular system series 8000 offers, in addition to the mainframe hm8001-2 and the blank module hm800, the 4-digit programmable multimeter hm8012, the lcr-meter hm8018, the 1.6ghz universal counter hm8021-4, the 10mhz function generator hm8030-6 and the triple power supply hm8040-3
Electrical : Wires , Cables, Bus bar, electrical panel fabrication, Electro-mechanical : Pneumatic valve, inductive proximate switches etc. Components : AC capacitors, Service - Repairs Centers of UPS Invertors etc. Motors : Manufacturing and service industries, Scientific offers wide range of Workbenches for industrial and laborartory application.
Digital Multimeteres 4 digit True RMS, Programmable and non-programmable DMM with data logging software.ACDC Voltage, ACDC Current, Resistance, Frequency, Capacitance, Temperature, Diode, Transistor, Continuity test
Harmonics & Flicker Analysis do cause these 'harmonics' and even though the amount created by each product may be small, the overall effect of many 1, 000s on the local electricity supply network causes problems. This same instrument, also includes flicker measurements as required by IEC61000-3-3, to include inrush current measurement. The Harmonics standard includes a requirement for the incoming mains to be itself free from harmonic content (
Industrial & Laboratory Work Benches Electro-mechanical : Pneumatic valve, inductive proximate switches etc. Electrical : Wires , Cables, Bus bar, electrical panel fabrication. Educational lab experiments from analog to advance ,
We offer high voltage capacitor charger. The capacitor charger (ccr) can be considered as a current generator (norton model). Hes suitable for all applications that need very fast regulation with big voltage amplitudes and repeated charging and discharging (total or more than 50% of the max). The ccr has a very low stored energy and may hold a shoting rate up to 1khz*. Ccr machine must operate with an essentially capacitive load. Its regulation mode differs from a sr and prevent from any overshot.
We offer high voltage dc power supply. The regulated power supply can be considered as a voltage generator (thevenin model). It is recommended for all types of loads. using this power supply is generally not recommended to operate with capacitors when the discharge is important. Under certain conditions it can be used for partial discharge relatively low (20%) on storage capacitor
INDORE, Madhya Pradesh, India
