Post Buy Requirement
SC
Mumbai, Maharashtra, India
Add Review

Our Products

  1. Calipers 5 Products available
  2. Clamps 8 Products available
  3. Power Supply System 3 Products available
  4. Storage Drums, Tanks & Containers 3 Products available
  5. Chillers 3 Products available
  6. Electric Coil 3 Products available
  7. Industrial Blowers, Coolers & Fans 3 Products available
  8. Water Bottle 7 Products available
  9. Lab Instrument 9 Products available
  10. Laboratory Equipments 41 Products available
  11. Others 141 Products available

Laboratory Equipments

Plug Key

  • Model PHY-0071

Brass Blocks are mounted on Bakelite base.


The brass plugs & lugs are thoroughly inter-lapped for perfect locking.


Brass terminals are provided on the block.9 mm thick 10.5 mm thick



a) One Way


b) Two Way


c) Three Way


d) Four Way

View Complete Details

Physics Simple Galvanoscope

  • Model PHY-0080

Simple Galvanoscope for Physics Lab comprises wooden former with terminals & engraved metal circle marked 0 - 180 - 0, divided & figured every 45, with magnetic pivot, wound with 30 turns enamelled copper wire & complete with 75 mm magnetic needle with brass bearing. Maximum opening voltage 4.5 V.

View Complete Details

Electrophorous Brass N .P.

  • Model HV-EXP4327

Electrophorous Brass N.P. Science Labs :-Disc, with khob ebonite handle base of thick ebonite fitted in wooden scale for Demonstrating electrostatic induction.

View Complete Details

Ballistic Galvanometer

  • Model HV-EXP4318

Ballistic Galvanometer Science Labs a) Ballistic Galvnometer :- Introduced very new type of ballistic Galvanometer. The box base are made of Aluminum. A large coil wound on nonmagnetic non-conducting material is suspended by a phosphor bronze wire in pole piece of a very strong permanent magnet. It carries an optical True concave mirror of about 1 cm. dia, A zero adjuster is provided at the top. The coil can be damped by a lever when not in use. The whole Front panel is covered by glass plate so teacher can demonstrate each every thing in the ballistic galvanometer to the students. The time period of moving coil is 10 to 12 seconds. a. 100 ohms b. 500 ohms b) Ballistic Galvanometer :- OSAW type coil resistance 100 ohms 0.3 Micro Amp. Senstive per division.

View Complete Details

Tongs For Crucibles

  • Model CH-M0013
Hover labs are offering the superior quality Crucible Tong. Design of the tongs ensures safe distance of hands from the hot surface. It is available in different sizes & specifications at competitive prices.

MATERIAL:

High grade raw material

Cutting edge technology

FEATURE:

* Sleek design

* comfort grip

* rust resistant
View Complete Details

Retort Stand,

  • Model CH-M0014

The set comprises 1 each of Retort Stand Base, Rod, and Clamp and Boss head.



The individual parts are also available separately:


Retort base 200 x 125mm


Rod 12 x 600mm


Retort clamp 260 x 85mm


Retort clamp has rubber jaws and 3 prongs


Boss head fits rods up to 16mm


Bases, rods and clamps are supplied singly.



Retort Stand is made of Mild Steel Sheet, die made thickness 5mm with chrome plate rod, Base Blue Powder Coating.





Related Products
View Complete Details

Z Test Tube Stand

  • Model HV-EXP1805

Z Test Tube Stand Science Labs Hoverlabss is Manufacturer, Exporter Supplier of Z Test Tube Stand Description Holes : 19 holes assorted Coating : Blue powder coating.

View Complete Details

Retort Rod

  • Model HV-EXP1804

Retort Rod Science Labs Hoverlabss is Manufacturer, Exporter Supplier of Retort Rod Length (in m.m.) : 300 300 500 600 750 1000.

View Complete Details

Rotary Microtome

  • Model BLE003

Rotary Microtome - Heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution of the drive wheel, the feed panel engaged the teeth of ratchet wheel which advances the object holder through cone and inclined plane mechanism. A safety device automatically disengages the feed mechanism. Feed indicator is in front and fed setting is at back of .

View Complete Details

Gas Taps

  • Model CH-M0005

We are reckoned manufacturer and supplier of premium quality range of Gas Taps. This product is manufactured using the latest techniques in order to maintain its adherence to universally accepted standards. These products are manufactured using quality-approved raw material procured from trusted vendor-base.Material: Plastic Steel Weight: 500 g to 2 kg

View Complete Details

Retort Stand

  • Model CH-M0007

These non-corrosive, moulded Retort Stand provide excellent replacement for the metal ones. The Retort Stand is a support unit that is often used to hold rings. The offered stands are also checked on different parameters in order to offer a quality approved range of products to our customers. The retort stand consists of a cast iron rectangular base.Size: 65*34*20 cm Material: Iron Weight: 15/13 k

View Complete Details

Beaker Tong

  • Model CH-M0010

Being a customer-oriented firm, we are engaged in offering the supreme quality Beaker Tong. Our range is manufactured from quality raw material that is procured from the reliable vendors of the industries. Our tong are known for their attributes, like quality material, durability, etc.Material: Stainless Steel Size: 28 cm X 0.8 mm Weight: 94 g

View Complete Details

Copper Water Bath

  • Model CH-M0011

Our Copper Water Bath is of the best quality and is highly demanded all over. These are made in various specifications based on the requirement of the clients. After the completion of the manufacturing process, our professionals make these center rings pass a quality check so as to ensure their flawlessness. Water baths can hold often temperatures within a tenth of a degree Celsius.Material: Copper Weight: 3 to 4 kg

View Complete Details

Burette

  • Model LP0001

Burette is subsisting of leak proof stopcock fitted with a self lubricating PTFE plug and with a transparent acrylic body and a. Each Burette is individually calibrated to give maximum accuracy. The pH RANGE OF 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric Acid & Ammonium Hydroxide.

View Complete Details

Pipette Pump

  • Model LP0002

This pump is featured with fast release pipetting device for precise pipetting & zip quick emptying. We can rotate knurled thumbwheel to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. Silicon rubber collects inside to hold various pipettes of standard sizes for molded chuck. This pump can be easily disassembled for thorough cleaning as it resists acids & alkalis. Cone No. Particular Packing 20001 2 ml. 12 20002 10 ml. 12 20003 25 ml. 12

View Complete Details

Petri Dish (Culture )

  • Model LP0006

PS Petri Dish with fitting proves excellent for culture exp. Contrived in polystyrene, this transparent Petri Dish furnished with excellent inside view. Cone No. Particular Packing 57501 Petri Dish 12

View Complete Details

Atomic Model Set

  • Model LP0007

Atomic Model Sets subsist of molded balls of different colors and sizes along with connecting lugs of different sizes. These sets are very accommodating in modeling different organic & inorganic compounds. Senior set: this set subsists of 185 lugs & 370 balls of prescribed colors & sizes packed in a molded box having separate space for every Particular color & size of ball. Junior set: this set subsists of 37 connecting lugs & 75 balls of different colors & sizes packed in a molded box. Code No. Particular Packing 58001 senior set 1 58002 junior set 1

View Complete Details

Micro Test Plates

  • Model LP0014

HOVERLABS micro test plates are composed of optically clear, non-toxic polystyrene. These plates with 96 u bottom or flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. Code No. Particular Packing 66801 flat bottom 72 66802 u bottom 72

View Complete Details

Petri Dishes (Disposable )

  • Model LP0015

Petri Dishes are Transparent, ready to use, disposable petri dishes are composed of optically clear, non-toxic, polystyrene. These petri dishes packed independently in polyethylene bags are sterilized by radiation. Code No. Particular Packing 69001 90 mm. Radiation stz. 460 69002 60 mm. Radiation stz. 300 69003 35 mm. Radiation stz. 500


View Complete Details

Rack For Petri Dishes

  • Model LP0016

These racks are clear acrylic completed with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90 mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very convenient during inoculation, incubation & storage. Visibility from all sides enables the culture to be seen & checked during incubation. Code No. Particular Packing 69101 rack for 90mm petri dishes 2 69102 rack for 60mm petri dishes 2

View Complete Details

Test Tube Stand

  • Model LP0019

Test Tube Stand contains four 25 mm dia holes & eight 19 mm dia holes in its top plate. A handy, little, space saver, this circular twelve place Polypropylene. The base has matching hemisphertical well & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Code No. Particulars Packing 77704 19 mm. & 25 mm. Tubes 2

View Complete Details

Policemen Stirring Rods

  • Model LP0028

This is a multipurpose apparatus which behaves as a stirrer as well spatula. The fattened ends of this rod form two small spatulas. Code No. Particulars Packing 81411 -6 mm. X h-245mm. 12

View Complete Details

Soft Loop Sterile

  • Model LP0029
Soft Loop Sterile

This non-toxic disposable loop is exact to semi quantitative stand for handling samples. Code No. Particulars Packing 81421 soft loopes- 1 l 100 81422 soft loopes -10 l 100 81423 inoculation needle 100

View Complete Details

Laboratory Tray

  • Model LP0032

Needless to say, HOVERLABS laboratory tray molded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have subsuded walls which prove good for nesting. Code No. Particulars Packing 81701 450 x 350 x 75 mm 10 81702 375 x 300 x 75 mm 10

View Complete Details

Utility Tray

  • Model LP0033

Existing range of autoclavable laboratories trays, is the utility tray and as the name suggests this polypropylene tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus. Code No. Particulars Packing 81721 375 x 350 x 130 mm 6

View Complete Details

Carrier Tray

  • Model LP0034

This autoclavable polypropylene tray has a remarkable feature i.e. Its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly. Code No. Particulars Packing 81731 380 x 240 x 115 mm 6

View Complete Details

Measuring Cylinder Hexagonal

  • Model LP0044

HOVERLABS measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent. code no. particulars least count packing 80031 10 ml. 0. 2 ml. 24 80032 25 ml. 0. 5 ml. 12 80033 50 ml. 1 ml. 12 80034 100 ml. 1 ml. 12 80035 250 ml. 2 ml. 6 80036 500 ml. 5 ml. 4 80037 1000 ml. 10 ml. 3

View Complete Details

Staining Box

  • Model LP0047

Molded in Polypropylene, this Staining Box helps in staining, fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist temperatures from -700C to +700C. The LDPE plug provides leakproof seal and allows easy liquid drainage. CODE NO. PARTICULARS PACKING 79301 125 x 125 x 50 mm. 2

View Complete Details

Measuring Cylinder

  • Model LP0054

HOVERLABS Measuring Cylinders, molded in Polypropylene & TPX are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. Material : A CODE NO. PARTICULARS LEAST COUNT PACKING 80001 10 ml. 0.2 ml. 24 80002 25 ml. 0.5 ml. 12 80003 50 ml. 1 ml. 12 80004 100 ml. 1 ml. 12 80005 250 ml. 2 ml. 6 80006 500 ml. 5 ml. 4 80007 1000 ml. 10 ml. 3 80008 2000 ml. 20 ml. 2 Material : TPX 80021 10 ml. 0.2 ml. 24 80022 25 ml. 0.5 ml. 12 80023 50 ml. 1 ml. 12 80024 100 ml. 1 ml. 12 80025 250 ml. 2 ml. 6 80026 500 ml. 5 ml. 4 80027 1000 ml. 10 ml. 3

View Complete Details

Conical Measures

  • Model LP0056

To measure small quantities of reagents these conical measures are very good . which is molded in polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy code no. particulars least count packing 81150 12 ml. 1 ml. 12 81151 25 ml. 1 ml. 12 81152 50 ml. 2 ml. 12 81153 125 ml. 5 ml. 12 81154 200 ml. 5 ml. 12

View Complete Details

Conical Falsks

  • Model LP0057

Composed of polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leak proof. Threads should be disengaged before autoclaving. code no. particulars packing 38101 100 ml. 12 38102 250 ml. 12 38103 500 ml. 12

View Complete Details

Coplin Jar

  • Model LP0059

HOVERLABS coplin jar composed of polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the coplin jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides. Cone no. Particulars Packing 62101 Coplin Jar 12

View Complete Details

Measuring Cylinder Pentagonal

  • Model LP0060

Adding to the range of round & hexagonal base cylinders are the pentagonal ones. HOVERLABS now offers you a wide range of cylinders with different bases to choose from. Prominently raised graduation & excellent contact clarity are among the other features of these cylinders. code no. particulars least count packing 80051 10 ml. 0. 2 ml. 24 80052 25 ml. 0. 5 ml. 12 80053 50 ml. 1 ml. 12 80054 100 ml. 1 ml. 12 80055 250 ml. 2 ml. 6 80056 500 ml. 5 ml. 4 80057 1000 ml. 10 ml. 3

View Complete Details

Specimen Jar (Gas Jar)

  • Model LP0064

These transparent Specimen Jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it. Code No. Particulars PACKING 40001 50 mm x h150 mm 12

View Complete Details

Leclanche Cell Pot

  • Model LP0066

Blown in polypropylene, this pot is used for making leclanche cell. This pot too has very good contact clarity & excellent chemical resistance. Code No. Particulars packing 82102 leclanche cell pot 12

View Complete Details

Simple Cell Pot

Simple cell pot, as the name suggests, is used for making simple cells & voltmeters etc. scluptured in polypropylene, this pot has very good contact clarity and excellent chemical resistance. Being in polypropylene, this pot is much durable than the one used conventionally. Code No. Particulars packing 82101 simple cell pot 12

View Complete Details

Micro Tip Box

  • Model LP0073

The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box. Code No. Particulars Packing 67011 For 96 Micro Tips of 2-10ul 6 67012 For 96 Micro Tips of 2-200ul 6 67013 For 100 Micro Tips of 200-1000ul 6

View Complete Details

Carboy With Stop Cock

  • ModeL LP0076

Adding in line of HOVERLABS' aspirators, these polypropylene carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions. Code No. Particulars Packing 34051 10 Ltrs. 1 34052 20 Ltrs. 1

View Complete Details

Magenta Box

  • Model LP0079

Magenta box is very often used in tissue culture & agricultural research experiments. Main body of this box is msde of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of polypropylene. This autoclavable box is square in shape giving itself a space saving feature. Code No. Particulars packing 81801 magenta box 12

View Complete Details

Carboy Laboratory Plasticware

  • Model LP0080

HOVERLABS' carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable carboys are provided with wide handles making it convenient while carrying or pouring purposes. Code No. Particulars packing 34001 10 ltrs. 1 34002 20 ltrs. 1

View Complete Details

Seperatory Funnel

  • ModeL LP0085

HOVERLABS' seperatory funnel is made of polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leak proof threaded screw cap. The polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel. Code No. Particulars packing 81201 100 ml. 2 81202 250 ml. 2 81203 500 ml. 2

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • SCIL (SCIL)
  • 110, Gautam Udyog Bhavan, LBS Marg Bhandup West,, Mumbai, Maharashtra - 400078, India
  • Share us via
Retailer of Laboratory Equipments from Mumbai, Maharashtra by SCIL
Post Buy Requirement
SC
Mumbai, Maharashtra, India
Add Review

Our Products

  1. AC Motor 4 Products available
  2. Rack 7 Products available
  3. Measuring Instruments & Equipment 5 Products available
  4. Laboratory Equipment 6 Products available
  5. Gifts, Handicrafts & Artifacts 3 Products available
  6. Clamps 8 Products available
  7. Calipers 5 Products available
  8. Power Supply System 3 Products available
  9. Storage Drums, Tanks & Containers 3 Products available
  10. Chillers 3 Products available
  11. Others 141 Products available

Laboratory Equipments

Plug Key

  • Model PHY-0071

Brass Blocks are mounted on Bakelite base.


The brass plugs & lugs are thoroughly inter-lapped for perfect locking.


Brass terminals are provided on the block.9 mm thick 10.5 mm thick



a) One Way


b) Two Way


c) Three Way


d) Four Way

View Complete Details

Physics Simple Galvanoscope

  • Model PHY-0080

Simple Galvanoscope for Physics Lab comprises wooden former with terminals & engraved metal circle marked 0 - 180 - 0, divided & figured every 45, with magnetic pivot, wound with 30 turns enamelled copper wire & complete with 75 mm magnetic needle with brass bearing. Maximum opening voltage 4.5 V.

View Complete Details

Electrophorous Brass N .P.

  • Model HV-EXP4327

Electrophorous Brass N.P. Science Labs :-Disc, with khob ebonite handle base of thick ebonite fitted in wooden scale for Demonstrating electrostatic induction.

View Complete Details

Ballistic Galvanometer

  • Model HV-EXP4318

Ballistic Galvanometer Science Labs a) Ballistic Galvnometer :- Introduced very new type of ballistic Galvanometer. The box base are made of Aluminum. A large coil wound on nonmagnetic non-conducting material is suspended by a phosphor bronze wire in pole piece of a very strong permanent magnet. It carries an optical True concave mirror of about 1 cm. dia, A zero adjuster is provided at the top. The coil can be damped by a lever when not in use. The whole Front panel is covered by glass plate so teacher can demonstrate each every thing in the ballistic galvanometer to the students. The time period of moving coil is 10 to 12 seconds. a. 100 ohms b. 500 ohms b) Ballistic Galvanometer :- OSAW type coil resistance 100 ohms 0.3 Micro Amp. Senstive per division.

View Complete Details

Tongs For Crucibles

  • Model CH-M0013
Hover labs are offering the superior quality Crucible Tong. Design of the tongs ensures safe distance of hands from the hot surface. It is available in different sizes & specifications at competitive prices.

MATERIAL:

High grade raw material

Cutting edge technology

FEATURE:

* Sleek design

* comfort grip

* rust resistant
View Complete Details

Retort Stand,

  • Model CH-M0014

The set comprises 1 each of Retort Stand Base, Rod, and Clamp and Boss head.



The individual parts are also available separately:


Retort base 200 x 125mm


Rod 12 x 600mm


Retort clamp 260 x 85mm


Retort clamp has rubber jaws and 3 prongs


Boss head fits rods up to 16mm


Bases, rods and clamps are supplied singly.



Retort Stand is made of Mild Steel Sheet, die made thickness 5mm with chrome plate rod, Base Blue Powder Coating.





Related Products
View Complete Details

Z Test Tube Stand

  • Model HV-EXP1805

Z Test Tube Stand Science Labs Hoverlabss is Manufacturer, Exporter Supplier of Z Test Tube Stand Description Holes : 19 holes assorted Coating : Blue powder coating.

View Complete Details

Retort Rod

  • Model HV-EXP1804

Retort Rod Science Labs Hoverlabss is Manufacturer, Exporter Supplier of Retort Rod Length (in m.m.) : 300 300 500 600 750 1000.

View Complete Details

Rotary Microtome

  • Model BLE003

Rotary Microtome - Heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution of the drive wheel, the feed panel engaged the teeth of ratchet wheel which advances the object holder through cone and inclined plane mechanism. A safety device automatically disengages the feed mechanism. Feed indicator is in front and fed setting is at back of .

View Complete Details

Gas Taps

  • Model CH-M0005

We are reckoned manufacturer and supplier of premium quality range of Gas Taps. This product is manufactured using the latest techniques in order to maintain its adherence to universally accepted standards. These products are manufactured using quality-approved raw material procured from trusted vendor-base.Material: Plastic Steel Weight: 500 g to 2 kg

View Complete Details

Retort Stand

  • Model CH-M0007

These non-corrosive, moulded Retort Stand provide excellent replacement for the metal ones. The Retort Stand is a support unit that is often used to hold rings. The offered stands are also checked on different parameters in order to offer a quality approved range of products to our customers. The retort stand consists of a cast iron rectangular base.Size: 65*34*20 cm Material: Iron Weight: 15/13 k

View Complete Details

Beaker Tong

  • Model CH-M0010

Being a customer-oriented firm, we are engaged in offering the supreme quality Beaker Tong. Our range is manufactured from quality raw material that is procured from the reliable vendors of the industries. Our tong are known for their attributes, like quality material, durability, etc.Material: Stainless Steel Size: 28 cm X 0.8 mm Weight: 94 g

View Complete Details

Copper Water Bath

  • Model CH-M0011

Our Copper Water Bath is of the best quality and is highly demanded all over. These are made in various specifications based on the requirement of the clients. After the completion of the manufacturing process, our professionals make these center rings pass a quality check so as to ensure their flawlessness. Water baths can hold often temperatures within a tenth of a degree Celsius.Material: Copper Weight: 3 to 4 kg

View Complete Details

Burette

  • Model LP0001

Burette is subsisting of leak proof stopcock fitted with a self lubricating PTFE plug and with a transparent acrylic body and a. Each Burette is individually calibrated to give maximum accuracy. The pH RANGE OF 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric Acid & Ammonium Hydroxide.

View Complete Details

Pipette Pump

  • Model LP0002

This pump is featured with fast release pipetting device for precise pipetting & zip quick emptying. We can rotate knurled thumbwheel to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. Silicon rubber collects inside to hold various pipettes of standard sizes for molded chuck. This pump can be easily disassembled for thorough cleaning as it resists acids & alkalis. Cone No. Particular Packing 20001 2 ml. 12 20002 10 ml. 12 20003 25 ml. 12

View Complete Details

Petri Dish (Culture )

  • Model LP0006

PS Petri Dish with fitting proves excellent for culture exp. Contrived in polystyrene, this transparent Petri Dish furnished with excellent inside view. Cone No. Particular Packing 57501 Petri Dish 12

View Complete Details

Atomic Model Set

  • Model LP0007

Atomic Model Sets subsist of molded balls of different colors and sizes along with connecting lugs of different sizes. These sets are very accommodating in modeling different organic & inorganic compounds. Senior set: this set subsists of 185 lugs & 370 balls of prescribed colors & sizes packed in a molded box having separate space for every Particular color & size of ball. Junior set: this set subsists of 37 connecting lugs & 75 balls of different colors & sizes packed in a molded box. Code No. Particular Packing 58001 senior set 1 58002 junior set 1

View Complete Details

Micro Test Plates

  • Model LP0014

HOVERLABS micro test plates are composed of optically clear, non-toxic polystyrene. These plates with 96 u bottom or flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. Code No. Particular Packing 66801 flat bottom 72 66802 u bottom 72

View Complete Details

Petri Dishes (Disposable )

  • Model LP0015

Petri Dishes are Transparent, ready to use, disposable petri dishes are composed of optically clear, non-toxic, polystyrene. These petri dishes packed independently in polyethylene bags are sterilized by radiation. Code No. Particular Packing 69001 90 mm. Radiation stz. 460 69002 60 mm. Radiation stz. 300 69003 35 mm. Radiation stz. 500


View Complete Details

Rack For Petri Dishes

  • Model LP0016

These racks are clear acrylic completed with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90 mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very convenient during inoculation, incubation & storage. Visibility from all sides enables the culture to be seen & checked during incubation. Code No. Particular Packing 69101 rack for 90mm petri dishes 2 69102 rack for 60mm petri dishes 2

View Complete Details

Test Tube Stand

  • Model LP0019

Test Tube Stand contains four 25 mm dia holes & eight 19 mm dia holes in its top plate. A handy, little, space saver, this circular twelve place Polypropylene. The base has matching hemisphertical well & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Code No. Particulars Packing 77704 19 mm. & 25 mm. Tubes 2

View Complete Details

Policemen Stirring Rods

  • Model LP0028

This is a multipurpose apparatus which behaves as a stirrer as well spatula. The fattened ends of this rod form two small spatulas. Code No. Particulars Packing 81411 -6 mm. X h-245mm. 12

View Complete Details

Soft Loop Sterile

  • Model LP0029
Soft Loop Sterile

This non-toxic disposable loop is exact to semi quantitative stand for handling samples. Code No. Particulars Packing 81421 soft loopes- 1 l 100 81422 soft loopes -10 l 100 81423 inoculation needle 100

View Complete Details

Laboratory Tray

  • Model LP0032

Needless to say, HOVERLABS laboratory tray molded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have subsuded walls which prove good for nesting. Code No. Particulars Packing 81701 450 x 350 x 75 mm 10 81702 375 x 300 x 75 mm 10

View Complete Details

Utility Tray

  • Model LP0033

Existing range of autoclavable laboratories trays, is the utility tray and as the name suggests this polypropylene tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus. Code No. Particulars Packing 81721 375 x 350 x 130 mm 6

View Complete Details

Carrier Tray

  • Model LP0034

This autoclavable polypropylene tray has a remarkable feature i.e. Its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly. Code No. Particulars Packing 81731 380 x 240 x 115 mm 6

View Complete Details

Measuring Cylinder Hexagonal

  • Model LP0044

HOVERLABS measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent. code no. particulars least count packing 80031 10 ml. 0. 2 ml. 24 80032 25 ml. 0. 5 ml. 12 80033 50 ml. 1 ml. 12 80034 100 ml. 1 ml. 12 80035 250 ml. 2 ml. 6 80036 500 ml. 5 ml. 4 80037 1000 ml. 10 ml. 3

View Complete Details

Staining Box

  • Model LP0047

Molded in Polypropylene, this Staining Box helps in staining, fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist temperatures from -700C to +700C. The LDPE plug provides leakproof seal and allows easy liquid drainage. CODE NO. PARTICULARS PACKING 79301 125 x 125 x 50 mm. 2

View Complete Details

Measuring Cylinder

  • Model LP0054

HOVERLABS Measuring Cylinders, molded in Polypropylene & TPX are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. Material : A CODE NO. PARTICULARS LEAST COUNT PACKING 80001 10 ml. 0.2 ml. 24 80002 25 ml. 0.5 ml. 12 80003 50 ml. 1 ml. 12 80004 100 ml. 1 ml. 12 80005 250 ml. 2 ml. 6 80006 500 ml. 5 ml. 4 80007 1000 ml. 10 ml. 3 80008 2000 ml. 20 ml. 2 Material : TPX 80021 10 ml. 0.2 ml. 24 80022 25 ml. 0.5 ml. 12 80023 50 ml. 1 ml. 12 80024 100 ml. 1 ml. 12 80025 250 ml. 2 ml. 6 80026 500 ml. 5 ml. 4 80027 1000 ml. 10 ml. 3

View Complete Details

Conical Measures

  • Model LP0056

To measure small quantities of reagents these conical measures are very good . which is molded in polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy code no. particulars least count packing 81150 12 ml. 1 ml. 12 81151 25 ml. 1 ml. 12 81152 50 ml. 2 ml. 12 81153 125 ml. 5 ml. 12 81154 200 ml. 5 ml. 12

View Complete Details

Conical Falsks

  • Model LP0057

Composed of polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leak proof. Threads should be disengaged before autoclaving. code no. particulars packing 38101 100 ml. 12 38102 250 ml. 12 38103 500 ml. 12

View Complete Details

Coplin Jar

  • Model LP0059

HOVERLABS coplin jar composed of polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the coplin jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides. Cone no. Particulars Packing 62101 Coplin Jar 12

View Complete Details

Measuring Cylinder Pentagonal

  • Model LP0060

Adding to the range of round & hexagonal base cylinders are the pentagonal ones. HOVERLABS now offers you a wide range of cylinders with different bases to choose from. Prominently raised graduation & excellent contact clarity are among the other features of these cylinders. code no. particulars least count packing 80051 10 ml. 0. 2 ml. 24 80052 25 ml. 0. 5 ml. 12 80053 50 ml. 1 ml. 12 80054 100 ml. 1 ml. 12 80055 250 ml. 2 ml. 6 80056 500 ml. 5 ml. 4 80057 1000 ml. 10 ml. 3

View Complete Details

Specimen Jar (Gas Jar)

  • Model LP0064

These transparent Specimen Jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it. Code No. Particulars PACKING 40001 50 mm x h150 mm 12

View Complete Details

Leclanche Cell Pot

  • Model LP0066

Blown in polypropylene, this pot is used for making leclanche cell. This pot too has very good contact clarity & excellent chemical resistance. Code No. Particulars packing 82102 leclanche cell pot 12

View Complete Details

Simple Cell Pot

Simple cell pot, as the name suggests, is used for making simple cells & voltmeters etc. scluptured in polypropylene, this pot has very good contact clarity and excellent chemical resistance. Being in polypropylene, this pot is much durable than the one used conventionally. Code No. Particulars packing 82101 simple cell pot 12

View Complete Details

Micro Tip Box

  • Model LP0073

The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box. Code No. Particulars Packing 67011 For 96 Micro Tips of 2-10ul 6 67012 For 96 Micro Tips of 2-200ul 6 67013 For 100 Micro Tips of 200-1000ul 6

View Complete Details

Carboy With Stop Cock

  • ModeL LP0076

Adding in line of HOVERLABS' aspirators, these polypropylene carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions. Code No. Particulars Packing 34051 10 Ltrs. 1 34052 20 Ltrs. 1

View Complete Details

Magenta Box

  • Model LP0079

Magenta box is very often used in tissue culture & agricultural research experiments. Main body of this box is msde of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of polypropylene. This autoclavable box is square in shape giving itself a space saving feature. Code No. Particulars packing 81801 magenta box 12

View Complete Details

Carboy Laboratory Plasticware

  • Model LP0080

HOVERLABS' carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable carboys are provided with wide handles making it convenient while carrying or pouring purposes. Code No. Particulars packing 34001 10 ltrs. 1 34002 20 ltrs. 1

View Complete Details

Seperatory Funnel

  • ModeL LP0085

HOVERLABS' seperatory funnel is made of polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leak proof threaded screw cap. The polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel. Code No. Particulars packing 81201 100 ml. 2 81202 250 ml. 2 81203 500 ml. 2

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • SCIL (SCIL)
  • 110, Gautam Udyog Bhavan, LBS Marg Bhandup West,, Mumbai, Maharashtra - 400078, India
  • Share us via