Post Buy Requirement
SA
Delhi, India
Add Review

Our Products

  1. Transducer 6 Products available
  2. Level Transmitters 5 Products available
  3. Signs 5 Products available
  4. Flow Meters 5 Products available
  5. Measuring Instruments & Equipment 10 Products available
  6. Transmitter Device 5 Products available
  7. Industrial Valves 5 Products available
  8. Valves & Valve Fittings 8 Products available
  9. Measurement Gauges & Fittings 14 Products available
  10. Sensors 13 Products available
  11. Others 140 Products available

Sensors #4494318

Digital Tempreature Sensor

MIEPL make offering wide range of Digital Temperature Indicator specifically for food & dairy plants and similar applications. These are available in 2 wire or 3 wire configurations, the variety of sheathing makes it suitable for most critical applications. The Plug-on display fits for the 420mA 2-wire technique, 16-bit ADC MCU inside, allows users to use the two buttons, to program the zero point, span, decimalpoint, damping and alarm point etc.
View Complete Details

Loop Powered Tempreature Sensor

Miepl make offering wide range of loop powered indicator with temperature sensors designed for general purpose applications.These are available in 2 wire or 3 wire configuration, the variety of sheathing makes it suitable for most critical applications. The plug-on display fits for the 420ma 2-wire technique, 16-bit adc mcu inside, allows users to use the two buttons, to program the zero point, span, decimal point, damping and alarm point etc.
View Complete Details

MASS 2100 DI 40 Flow Sensor

MASS 2100 DI 3 to DI 40 is suitable for accurate mass flow measurement of a variety of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down ratio and density accuracy. The ease of installation through a "plug & play" mechanical and electrical interface ensures optimum performance and operation. The sensor delivers true multi-parameter measurements i.e.: Mass flow, volume flow, density, temperature and fraction.
View Complete Details

SITRANS FCS200 Flow Sensor

SITRANS FCS200 (DN10, DN 15 and DN 25) is a Coriolis sensor specialized for accurate mass flow measurement of gases. The sensor offers superior performance in terms of flow accuracy and turn down ratio. The ultra compact sensor design makes installation, replacement and commissioning very straight forward and easy.
View Complete Details

MAG 3100 P Flow Sensor

MAG 3100 P Flow sensor, The SITRANS F M MAG 3100 P is designed to meet the most common specifications within chemical and process industries.
View Complete Details

SITRANS FCS400 Flow Sensor

The flow measuring principle is based on the Coriolis Effect. The SITRANS FC430 flowmeter consists of a sensor type FCS400 and a transmitter FCT030. The FCS400 sensors measuring tubes are energized by an electro-mechanical driver circuit which oscillates them at their resonance frequency. Two pick-ups are placed symmetrically upstream and down- stream of the central driver. When a process fluid passes through the sensor, the Coriolis Effect will act on the vibrating tubes and cause deflection which can be measured as a phase shift between pick-ups 1 and 2. The phase shift is proportional to the mass flow rate. The amplitude of the driver is automatically regulated to ensure a stable output from both of the pickups. The temperatures of the sensor tubes and frame are measured with high precision to provide compensation for changes with temperature in the measuring properties. The sensor signals are analyzed for flow, density and fluid tem- perature in the sensor front end. The digital signal is controlled to conform to high Safety Integrated Level (SIL) and sent digitally to the transmitter via standard cable. The transmitter further cal- culates total mass and volume, fraction, dosing control and many other functions. The front-end module has a process noise filter, which can be used to improve the meters performance when installation and application conditions are not ideal. Typical interferences from process conditions such as pump pulsations, mechanical vibra- tions, oscillating valves can be reduced considerably.
View Complete Details

MASS 2100 DI 1.5 Flow Sensor

MASS 2100 DI 1.5 is suitable for low flow measurement applications of a variety of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down ratio and density accuracy. The ease of installation through a "plug & play" mechanical and electrical interface ensures optimum performance and operation. The sensor delivers true multi-parameter measurements i.e.: Mass flow, volume flow, density, temperature and fraction
View Complete Details

SITRANS FC300 Flow Sensor

SITRANS FC300 is a compact Coriolis mass sensor suitable for flow measurement of a variety of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down ratio and density accuracy. The ease of installation through a plug & play interface ensures optimum performance and operation. A new designed encapsulation in stainless steel with a surpris- ingly low weight of only 3.5 kg (7.7 lb), ensures a rigid and robust sensor performance for a wide range of applications
View Complete Details

MAG 1100 F Flow Sensor

MAG 1100 F Flow sensor, The electromagnetic sensor SITRANS F M MAG 1100 F is de- signed to meet applications in the food and beverage industry
View Complete Details

MAG 1100 HT Flow Sensor

MAG 1100 and MAG 1100 HT Flow sensor. The SITRANS F M MAG 1100 is an electromagnetic flow sensor in a compact wafer design designed for flow applications in the process industry.
View Complete Details

MAG 3100 HT Flow Sensor

The SITRANS F M MAG 3100 is an electromagnetic flow sensor in a large variety that meets the demands of almost every flow application.
View Complete Details

MAG 5100 W Flow Sensor

The SITRANS F M MAG 5100 W is an electromagnetic flow sen- sor designed to meet ground water, drinking water, waste water, sewage or sludge applications
View Complete Details

SONO 3300 Sensor

The combination of SONO 3300 sensor and FUS060 transmitter is ideal for applications within the general industry. Measurements are independent of liquid temperature, density, pressure and conductivity. Transducers cannot be replaced.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • G.K. Sharma (See Automation & Engineers)
  • 2nd Floor, 03, Veer Savarkar Block, Jaina Complex, Vikas Marg, Shakarpur, Delhi - 110092
  • Share us via