Our Products
This is due to our cordial associations with the logistic companies that we are able to reach any preferred Batala(India) with ease, thus meeting the delivery schedule. We are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only.
Details
Length of Bed | 6' | 8' | 10’ | 12’ | ‘|2’ | 12’ | 16’ |
Width of Bed | 14" | 16" | 18" | 18" | 20" | 22" | 22" |
Centre Height | 12" | T4" | 16" | 16" | 1B" | 20" | 20" |
Spindle Bore | 3" | 3.1/8" | 3.5/8" | 3.5/8" | 4.1/8" | 4.1/8" | 4.1/8" |
Admit Between Centre | 33" | 49" | 70" | 94" | 88" | 84" | 130" |
Swing Bed Die | 23" | 27" | 31 " | 31 " | 35" | 39" | 39" |
Spindle Speed | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
HP. Becpmmended | 2 H.P. | 3 H.P. | 3 H.P. | 5 H.P | 5 I-|.P. | 7.5 H.P. | 7.5 H.P. |
Specification
Length of Bed | 6' | 8' | 10’ | 12’ | ‘|2’ | 12’ | 16’ |
---|---|---|---|---|---|---|---|
Width of Bed | 14" | 16" | 18" | 18" | 20" | 22" | 22" |
Centre Height | 12" | T4" | 16" | 16" | 1B" | 20" | 20" |
Spindle Bore | 3" | 3.1/8" | 3.5/8" | 3.5/8" | 4.1/8" | 4.1/8" | 4.1/8" |
Admit Between Centre | 33" | 49" | 70" | 94" | 88" | 84" | 130" |
Swing Bed Die | 23" | 27" | 31 " | 31 " | 35" | 39" | 39" |
Spindle Speed | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
HP. Becpmmended | 2 H.P. | 3 H.P. | 3 H.P. | 5 H.P | 5 I-|.P. | 7.5 H.P. | 7.5 H.P. |
Our investment in the well-structured warehouse has paid off well. We have successfully installed up-to-the-minute warehouse management software to keep the entire lot in a safe and organized manner. We are backed with highly experience packaging experts and team members; they ensure that the packaging is done with utmost proficiency and keeping in mind the globally accepted norms.
Standard Accessories
Extra or optional accessories.
Specifications
Stroke | Width | Height |
---|---|---|
2500 | 1200 | 1000 |
3000 | 1200 | 1000 |
3000 | 1500 | 1200 |
3600 | 1500 | 1200 |
4000 | 1500 | 1200 |
4000 | 2000 | 1500 |
5000 | 1500 | 1200 |
5000 | 2000 | 1500 |
6000 | 1500 | 1200 |
6000 | 2000 | 1500 |
8000 | 1500 | 1200 |
6000 | 2000 | 1500 |
8000 | 1500 | 1200 |
8000 | 2000 | 1500 |
8000 | 2500 | 2000 |
8000 | 3000 | 2500 |
Specification
Quality being the major concern of our organization, we keep a stringent check on the production, packaging and delivery processes. Our products are packed according to the requirement of buyers, as we provide customized packaging solutions. Our packages are superior, secure and waterproof as well.
Specification
Model No. | Seema180x1000 | Seema180x1500 |
---|---|---|
A.B.C | 1000MM | 1500MM |
Bed Length | 6.5’ | 8’ |
Bed Width | 275MM | 275MM |
Swing Over Bed | 350MM | 350MM |
Swing Over Cross Slide | 200MM | 200MM |
Spindle Bore | 40MM | 40MM |
Spindle Speed (RPM) | 45-1200 | 45-1200 |
Weight (Kg.) | 850KG | 950KG |
Model No. | Seema250x1000 | Seema250x1500 |
---|---|---|
A.B.C | 1000MM | 1500MM |
Bed Length | 7’ | 9’ |
Bed Width | 350MM | 350MM |
Swing Over Bed | 500MM | 500MM |
Swing Over Cross Slide | 300MM | 300MM |
Spindle Bore | 50MM | 50MM |
Spindle Speed (RPM) | 40-1000 | 40-1000 |
Weight (Kg.) | 1400KG | 1500KG |
Model No. | Seema200x1000 | Seema200x1500 |
---|---|---|
A.B.C | 1000MM | 1500MM |
Bed Length | 6.5’ | 8’ |
Bed Width | 275MM | 275MM |
Swing Over Bed | 380MM | 380MM |
Swing Over Cross Slide | 325MM | 325MM |
Spindle Bore | 50MM | 50MM |
Spindle Speed (RPM) | 45-1000 | 45-1000 |
Weight (Kg.) | 900KG | 1000KG |
Specification
Specifications
Model | (No. 1 ½) | (No. 2) | (No.3) |
---|---|---|---|
Surface of table | 1200x225 | 1300x275 | 1500x325 |
No. of tee slots | 3 | 3 | 3 |
Size of the slots | ½ | ½ | 42863 |
Swival either slides | 45 | 45 | 45 |
Longgitufinal Travorse | 500mm | 500mm | 650mm |
Cross Food | 225mm | 300mm | 350mm |
Vertical Travers | 375mm | 425mm | 450mm |
Standard arbour | ISO-40 | ISO-40 | ISO-40 |
Spindle Spoods | 6 | 9 | 9 |
RPM of spindles | 65 to 850 | 35 to 750 | 35 to 750 |
Dia spinles | 70mm | 80mm | 90mm |
In front of bearings | 55mm | 60mm | 65mm |
Gear box for Feed | 3 Speed | 3 Speed | 3 Speed |
H.P. Required | 2 H.P. | 3 H.P. | 5 H.P. |
Height | 1525mm | 1650mm | 1780mm |
Weight Approx | 1250 kgs. | 1700 kgs. | 2000 kgs. |
Backed with industrious professionals, we keep a stern check on the products to ensure that the range is commensurate to international norms. We make every effort to deliver the best in class products and for that, we follow standardized packaging norms. This is done by using qualitative packaging material followed by stringent checking by the professionals.
Click For More Details
Technical Specifications
Model | 264 | 265 | 266 |
---|---|---|---|
Size | 12” | 18' | 24” |
Max. Lengih oJ Jointer Planer | 48" | 68" | 72” |
widrh 0i Tabl€ | 12" | 18" | 24” |
Flo0r t0 Tablel | 28” | 40" | 40" |
Height from Floor to Table | 34” | 34" | 34” |
Cutter Block Dia | 4” | 4 1/2” | 4 1/2” |
Cutter Block R.P.M. | 4200 | 4200 | 4200 |
Boring & Motorising Attachment | |||
Table Travel lnternal | 6" | 6" | 8" |
Table Travel Parallel | 8" | 8" | 10” |
Table Travel Feed | 4” | 4” | 6" |
Circular Saw Table | 14"x23" | 14'x23' | 14'x23' |
Boring Capacily | 1/2” | 5/8" | 3/4” |
H.P. Required | 2H.P. | 3 H.P. | 5 H.P. |
Click For More Details 02
Click For More Details 03
Click For More Details 04
Click For More Details 05
Click For More Details 06
Click For More Details 07
Click For More Details 08
“Kailash" Brand Hydraulic Control Hacksaw Machine has been designed to cut quickly & accurately all material from nickel chrome steel to plastic, controls are simple & easy, An automatic cut out operates at the completion of the operation Er the bow slide retums to the top position, The machines has attractive appearance.
Bed : The bed is of rigid casting with a wide through for collection of coolant, swarf & also houses the V-belts device, bed is single piece casting.
Saw Frame : The saw frame is of rigid construction & runs in prismatic guide ensuring a square & parallel out & this cut takes place on the backward pull stroke, The blade is hydraulically lifted out of contact with work place on the forward stroke to prevent wear of the blade.
The Drive : The drive is given to the machine through V-Pullys with provision to adiust fully the tension of the V-Belts. The shafts are fitted with taper and ball bearings which eliminate friction.
Speed : Two speeds has been provided in order to make it suitable for all metals. High speed for metals like mild steel, brass, copper etc. and low speed for cast iron.
Feed Saw : Feed saw is controlled hyd aulically by two levers provided at the dash-pot. One controls the rate of feed, while the other enables the bow slide to be raised or lowered and the motor gets switched off on completion of the cut.
Vice : The vice is rigid construction. The one iaw remains fixed while other can be adjusted according to the size ofthe material to be cut.
Coolant : The coolant tank is totally enclosed in the machine base with a constant speed pump which continuously supplies coolant to the saw blade.
Electricals : Push button starter is fitted with an adjustable trip mechanism which stops the machine soon after the blade is clear from the work at extra cost.
Specifications
Model | M-175 | M-200 | M-250 | M-300 | M-350 | M-400 | M-500 | M-600 |
---|---|---|---|---|---|---|---|---|
Cap. Of Round Bar | 175 | 200 | 250 | 300 | 350 | 400 | 500 | 600 |
Cap. Of Square Bar | 125 | 150 | 200 | 250 | 275 | 325 | 350 | 425 |
Stroke | 135 | 135 | 140 | 140 | 140 | 135 | 150 | 150 |
Strokes per min. (approx) | 100-120 | 100-120 | 85-100 | 85-100 | 85-100 | 70-85 | 70-85 | 70-85 |
Blade Size | 12"-14" | 14" – 16" | 16"-18" | 18"-20" | 20"-22" | 18"-24" | 24"-32" | 30"-36" |
Electric Motor | 1 H.P | 1 H.P | 2 H.P | 2 H.P | 2 H.P | 3 H.P. | 5 H.P. | 5 H.P. |
RPM Motor | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 960 | 960 |
Length | 1000 | 1000 | 1150 | 1250 | 1300 | 1500 | 1650 | 1750 |
Width | 60 | 60 | 625 | 650 | 650 | 675 | 700 | 725 |
Height | 800 | 800 | 1000 | 1000 | 1100 | 1200 | 1300 | 1400 |
Weight (approx) | 325 kg. | 335 kg. | 450 kg. | 550 kg. | 650 kg. | 750 kg. | 1100 kg. | 1200 kg. |
Weight with Packing | 400 kg. | 450 kg. | 550 kg. | 650 kg. | 775 kg. | 900 kg. | 1300 kg. | 1400 kg. |
V-Belts Required | 4 Pcs. | 4 Pcs. | 4 Pcs. | 4 Pcs. | 4 Pcs. | 5 Pcs. | 6 Pcs. | 6 Pcs. |
Click For More Details
We are based in Batala(India) and we have carved a niche for ourselves in the market by offering quality products. The clients can stay assured with us for their transactions, as our payment methods are quite safe and reliable.
Standadrd Accessories : Motor Pully, Seivelling Vice, Crank Handle.
Accessories At Extra Cost : Electric Motor, Switch & Starter, Key Way Cutting Attachment, V Belts, Tools Lifting Attachment, Vertical Auto Feed to working table, Automatic Feed to Tool Slide.
Specifications
18 Stroke | 24" Stroke | |
---|---|---|
Length of stroke | 457 mm | 610 mm |
Length of ram without tool slide | 1016 | 1270 |
Ram Bearing in column | 711 | 856 |
Ram Bearing width | 241 | 290 |
Tool Slide Traverse | 102 | 152 |
Horizontal Traverse of table | 457 | 556 |
Vertical Traverse of table | 330 | 370 |
Top Clamping Surface of table | 279x432 | 350x580 |
Length of main slide | 700 | 887 |
Width of main slide | 280 | 316 |
No. of speeds | 4 | 4 |
Range of Speeds | 16-80-40-65 | 12-20-36-58 |
Motor required for cone pully drive | 2 H.P. | 3H.P. 1440 RPM |
Motor Required for all geared drive | 2 H.P. | 3 H.P. 960RPM |
Specification
To protect our entire range of products from external factors that can be damaging, we have a state-of-the-art packaging unit equipped with the latest secure packaging technologies and materials. We have online payment processing system to avoid security issues. In order to make it more reliable, we have maintained payment logs accessible for the convenience of our customers.
Our payment procedure is not only easy to operate but also guarantee secure transactions. In addition to this, it is featured with multiple options like cash payment, bank account transfer and more. we are a quality-conscious firm and for maintaining product quality, we consider several measures so as to ensure that only flawless lot reaches the buyers.
Standard Accessories
Accessories at extra cost
Technical Specification
Technical Specifications
Model | SFW-1 | SFW-18 | SFW-24 | SFW-30 | SFW-36 | SFW-40 | SFW-50 |
---|---|---|---|---|---|---|---|
Shear Size | 12” | 18” | 24” | 30” | 36" | 40” | 50” |
Length of Bed | 14” | 21 1/2" | 27 1/2" | 33 3/4” | 40 1/4” | 42 3/4” | 58 1/4' |
Width of Bed | 10" | 10" | 10" | 10" | 12" | 12" | 13” |
Shear M. Sheets upto | 20 Swg | 20 Swg | 20 Swg | 20 Swg | 20 Swg | 20 Swg | 20 Swg |
Length of Cut in one Stroke | 12” | 18” | 24” | 30” | 36” | 40” | 51” |
Size of Blades | 12 1/2” | 18 1!2" | 24 3/4" | 30 3/4" | 36 3/4' | 40 3/4" | 51” |
Height of Machine | 41" | 41" | 41" | 41" | 44” | 44” | 45” |
The material that we make use for manufacturing the offered lot of products is of fine quality and tested prior to production of the offerings. We are backed with advanced logistics services owing to which we are flexible in delivering the product range of time and with utmost safety.