Write a Review
Our Products
We offer the best product range of Heavy Duty Lathe Machine.
We are offering 7 feet Heavy Duty Lathe Machine
|
Specification |
MATRIC (A-1) | MATRIC (A-2) | MATRIC (A-3) | MATRIC (A-4) |
| LENGTH OF BED | 1675 | 2140 | 2690 | 3030 |
| HEIGHT OF CENTER | 254 | 254 | 254 | 300 |
| SWING OVER BED | 435 | 435 | 435 | 435 |
| SWING OVER CROSS SLIDE |
285 |
285 | 285 | 330 |
| MOVEMENT OF CROSS SLIDE | 225 | 225 | 225 | 225 |
| SWING IN GAP | 200 | 200 | 200 | 200 |
| ADMIT BETWEEN CENTER | 650 | 1025 | 1575 | 1940 |
| BED | ||||
| BED TYPE | 2V & 2FLAT | 2V & 2FLAT | 2V & 2FLAT | 2V & 2FLAT |
| BED WIDTH | 325 | 325 | 325 | 325 |
| LENGTH OF GAP IN BED | 150 | 150 | 150 | 150 |
| LENGTH OF BED IN OF FACE PLATE | 200 | 200 | 200 | 200 |
| MAIN SPINDLE | ||||
| SPINDLE NOSE THREAD | 6T.P.I.75MM | 6T.P.I.75MM | 6T.P.I.75MM | 6T.P.I.75MM |
| TAPER BORE IN SPINDLE | MT-4 | MT-4 | MT-4 | MT-4 |
| SPINDLE BORE | 52mm | 52mm | 52mm | 52mm |
| TAIL STOCK | ||||
| TAIL STOCK RAM | 50.8mm | 50.8mm | 50.8mm | 50.8mm |
| TAIL STOCK SPINDLE TAPER | MT-4 | MT-4 | MT-4 | MT-4 |
| RAM TRAVEL | 175 | 175 | 175 | 175 |
| COMPOUND SLIDE | ||||
| COMPOUND TRAVEL | 125 | 125 | 125 | 125 |
| TOOL SLANK SECTION | 25 * 25 | 25 * 25 | 25 * 25 | 25 * 25 |
| SPEEDS | ||||
| NO. OF SPEEDS | 8 | 8 | 8 | 8 |
| RANGE | 50 * 625 | 50 * 625 | 50 * 625 | 50 * 625 |
| THREAD / NO.RANGE | ||||
| DIAMETER OF SCREW | 38 *4 TPI | 38 *4 TPI | 38 *4 TPI | 38 *4 TPI |
| METRIC | 13(1 TO 6 MM) | 13(1 TO 6 MM) | 13(1 TO 6 MM) | 13(1 TO 6 MM) |
| INCH | 19(1 TO 24 TPI) | 19(1 TO 24 TPI) | 19(1 TO 24 TPI) | 19(1 TO 24 TPI) |
| ELECTRICALS | ||||
| MAIN MOTOR | 2 H. P. | 2 H. P. | 2 H. P. | 3 H. P. |
| WEIGHT | 1250 | 1250 | 1250 | 1250 |
| FLOOR SPACE | 1800-950 | 2150-950 | 2750-950 | 3150-950 |
Seema Industries (Seema Industries)
1-Gokulnagar, Gokuldham Main Road, Near Uttam Hall,, Rajkot, Gujarat - 360004
Share us via
