Our Products
Our Complete range of products are THK LINEAR MOTION SYSTEM, MSX Slit Set Screw Type Flexible Couplings for Industrial, MSX-C Clamping Type Flexible Slit Couplings For Industrial, DESTACO Hydraulic Clamping and Oiles Drymet LF Bushings LFB Bearings.
In situations where larger clamping pressures are necessary, as well as quick, repeatable, and reliable actuation, such as in contemporary machine shops, DESTACO hydraulic clamping systems offer powered workholding solutions. We provide a broad selection of hydraulic and workhold clamping parts, energy sources, and accessories that are ideal for retrofitting or replacing both straightforward mechanical systems and more intricate clamping and locating tasks. The majority of components are available as single-acting for use with our air-oil boosters. These reasonably priced power sources offer a practical way to harness the strength of a hydraulic system while using the shop air supply.
THK Linear Motion System's licenced distributor in India is SEIMITSU Factory Automation Pvt. Ltd. A variety of linear motion systems, including LM Guides, Ball Splines, Ball Screws, and Actuators, are designed and produced by THK. All of these parts can be found in a range of industrial machinery, such as industrial robots, machine tools, and semiconductor production equipment.
Additional Information:
Packaging Details : ZST-GL Assembly Gauges
Additional Information:
Packaging Details : Curburized/Hardened Miter Gears
![Rigid Couplings Clamping Type [model No- Mlr-c]](https://img3.exportersindia.com/product_images/bc-full/2025/1/11954979/rigid-couplings-clamping-type-model-no-mlr-c-1737004995-7802958.jpeg "Rigid Couplings Clamping Type [model No- Mlr-c]")
| Lubrication condition | periodic lubrication | oil lubrication |
| Service temperature range ℃ | －40～＋150 | |
| Allowable max. pressure P N/mm² {kgf/cm²} | 15｛153｝ | |
| Allowable max. velocity V m/s { m/min} | 1.65｛99｝ | 5.00｛300｝ |
| Allowable max. PV value N/mm² * m/s {kgf/cm² *m/min} | 1.65｛1,010｝ | 3.25｛1,990｝ |
| Mechanical properties | 500B1 | 500B2 | ||
|---|---|---|---|---|
| Density | - | g/cm³ | 8.8 | 8.7 |
| Tensile strength | JIS Z 2241 | N/mm² {kgf/mm²} | 195 {20} | 245 {25} |
| Tensile elongation at break | JIS Z 2241 | % | 15 | |
| Compressive strength | - | N/mm² {kgf/mm²} | 95 {9.5} (note) | 130 {13} (note) |
| Impact strength | JIS Z 2242 | J/cm² {kgfm/cm²} | 10 {1} | - |
| Hardness | JIS Z 2243 | HBW | 60 | 70 |
| Modulus of longitudinal elasticity | - | N/mm² {kgf/mm²} | 83,000 {8,500} | 103,000 {10,500} |
| Service Range | 500F SL1 | |
|---|---|---|
| Lubrication condition | Dry | periodic lubrication |
| Service temperature range °C | -40～+400 | -40～+150 |
| Allowable max. pressure P N/mm² {kgf/cm²} | 5 (73.5) {51 (750)} | 8 (73.5) {82 (750)} |
| Allowable max. velocity V m/s { m/min} | 0.15 {9} | 0.25 {15} |
| Allowable max. PV value N/mm² * m/s {kgf/cm² * m/min} | 0.50 {306} | 0.80 {490} |
| Service Range | 500HP SL1 | |
|---|---|---|
| Lubrication condition | dry | periodic lubrication |
| Service temperature range °C | -40～+150 | |
| Allowable max. pressure P N/mm² { kgf/cm²} | 73 (180) {745 (1,837)} | |
| Allowable max. velocity V m/s | 0.10 {6} | 0.25 {15} |
| Allowable max. PV value (N/mm2・m/s) | 1.65 { 1,010} | 3.25 { 1,990} |
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
Mechanical Properties
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
| Service Range | 500 SP1 SL1 | 500 SP1 SL4 | |
|---|---|---|---|
| Lubrication condition | Dry | periodic lubrication | Dry |
| Service temperature range °C | -40～+300 | -40～+150 | -40～+80 |
| Allowable max. pressure P N/mm² | 29 | 49 | |
| Allowable max. velocity V m/s | 0.5 | 1.00 | 0.25 |
| Allowable max. PV value N/mm²*m/s | 1.65 | 3.25 | 1.65 |
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
The Oiles 500 SP1-SL4 series are designed as self-lubricating bearings which are made of high strength brass alloy bases cast along with innovative casting technology and engrained solid lubricants. Depending on the application, they can be combined with various types of solid lubricants Lubrication is not required for service. create reciprocating motions, oscillations, repeated starts and stops, and so on. Outstanding chemical and corrosion resistance. Standard items come in a variety of sizes. Shows excellent performance in both high-load and low-speed situations. Shows higher wear resistance in applications where an oil film is rarely present.
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
The Oiles 500 SP1-SL4 series are designed as self-lubricating bearings which are made of high strength brass alloy bases cast along with innovative casting technology and engrained solid lubricants. Depending on the application, they can be combined with various types of solid lubricants Lubrication is not required for service. create reciprocating motions, oscillations, repeated starts and stops, and so on. Outstanding chemical and corrosion resistance. Standard items come in a variety of sizes. Shows excellent performance in both high-load and low-speed situations. Shows higher wear resistance in applications where an oil film is rarely present.
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,0 |
The Oiles 500 SP1-SL4 series are designed as self-lubricating bearings which are made of high strength brass alloy bases cast along with innovative casting technology and engrained solid lubricants. Depending on the application, they can be combined with various types of solid lubricants Lubrication is not required for service. create reciprocating motions, oscillations, repeated starts and stops, and so on. Outstanding chemical and corrosion resistance. Standard items come in a variety of sizes. Shows excellent performance in both high-load and low-speed situations. Shows higher wear resistance in applications where an oil film is rarely present.
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
The Oiles 500 SP1-SL4 series are designed as self-lubricating bearings which are made of high strength brass alloy bases cast along with innovative casting technology and engrained solid lubricants. Depending on the application, they can be combined with various types of solid lubricants Lubrication is not required for service. create reciprocating motions, oscillations, repeated starts and stops, and so on. Outstanding chemical and corrosion resistance. Standard items come in a variety of sizes. Shows excellent performance in both high-load and low-speed situations. Shows higher wear resistance in applications where an oil film is rarely present.
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
The Oiles 500 SP1-SL4 series are designed as self-lubricating bearings which are made of high strength brass alloy bases cast along with innovative casting technology and engrained solid lubricants. Depending on the application, they can be combined with various types of solid lubricants Lubrication is not required for service. create reciprocating motions, oscillations, repeated starts and stops, and so on. Outstanding chemical and corrosion resistance. Standard items come in a variety of sizes. Shows excellent performance in both high-load and low-speed situations. Shows higher wear resistance in applications where an oil film is rarely present.
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 755 |
| Tensile elongation at break | JIS Z 2241 | % | 12 |
| Compressive strength | - | N/mm² | 345 |
| Impact strength | JIS Z 2242 | J/cm² | 19 |
| Hardness | JIS Z 2243 | HBW | 210 |
| Modulus of longitudinal elasticity | - | N/mm² | 1,05,000 |
| Density | - | g/cm³ | 7.8 |
| Tensile strength | JIS Z 2241 | N/mm² | 785 |
| Tensile elongation at break | JIS Z 2241 | % | 10 |
| Compressive strength | - | N/mm² | 392 |
| Hardness | JIS Z 2243 | HBW | 235 |
| Modulus of longitudinal elasticity | - | N/mm² | 98,000 |
| Tensile strength | JIS K 7113 | N/mm² | 34.3 |
| Elongation | - | % | 30 |
| Tensile strength | JIS Z 2241 | N/mm² | 380 |
| Elongation | JIS Z 2241 | % | 27 |
| Hardness | JIS Z 2244 | HV | 107 |
| Tensile strength | JIS Z 2241 | N/mm² | 380 |
| Elongation | JIS Z 2241 | % | 27 |
| Hardness | JIS Z 2244 | HV | 107 |
Mechanical Properties
| Tensile strength | JIS Z 2241 | N/mm² | 380 |
| Elongation | JIS Z 2241 | % | 27 |
| Hardness | JIS Z 2244 | HV | 107 |
| Tensile strength | JIS Z 2241 | N/mm² | 380 |
| Elongation | JIS Z 2241 | % | 27 |
| Hardness | JIS Z 2244 | HV | 107 |
| Tensile strength | JIS Z 2241 | N/mm² | 380 |
| Elongation | JIS Z 2241 | % | 27 |
| Hardness | JIS Z 2244 | HV | 107 |
Seimitsu (Seimitsu Factory Automation Private Limited)
Seimitsu Tower, A - 51, H Block, MIDC Industrial Area, Pimpri Chinchwad, Pune, Maharashtra
Share us via
