Write a Review
Our Products
We are leaders in the market for providing best range of EDM Wires, Brass Wires, Flat Wires, Copper Wires and EDM Wire
| Sr. No | Wire Diameter (mm) |
Diameter Tolerance (mm) |
Wire Grade | Tensile Strength (N/mm 2) |
Elongation (%) |
Available Spool Types |
| 1 | 0.10 | + 0 , - 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax |
| 2 | 0.15 | + 0 , - 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax |
| 3 | 0.20 | + 0 , - 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax |
| 4 | 0.25 | + 0 , - 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax |
| 5 | 0.30 | + 0 , - 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax |
| No. | Process Type | Wire Type | |||
| Soft | Semi Hard | Hard | |||
| 1 | Straight cutting | 1 Pass Cutting | Not recommended | Good | Excellent |
| Straight cutting | 2 Pass Cutting (Rough +Finish) |
Not recommended | Not recommended | Excellent | |
| Straight cutting | 3 Pass Cutting (Rough +Finish + Refinish) |
Not recommended | Not recommended | Excellent | |
| 2 | Relief Cutting | 1 Pass Cutting relief under 10° | Not recommended | Good | Excellent |
| Relief Cutting | 1 Pass Cutting relief under 10° to 20° | Good | Excellent | Not recommended | |
| Relief Cutting | 1 Pass Cutting relief over 20° | Excellent | Good | Not recommended | |
We are the main supplier of this product.
Atul Shah (Senor Metals P. Ltd)
Plot- 353, GIDC - II, Dared, GIDC Phase-2, Jamnagar, Gujarat - 361004, India
Share us via
