HIGH SPEED CAPACITIES, SRM 224/ 236/ 240/ 260/ 280,   GERMAN TECHNOLOGY,   SUPER FLOW VALVE WITH VACUUM PRE-EVACUATION Shivsu SEPPA Pvt Ltd, Manufacturers of Automatic Glass Bottling Plants In Technical Collaboration with Rita Bottling brings you an advanced Glass Bottle Filler Crowner machine. Air containing 21 % oxygen is detrimental to the stability and shelf life of beverages. The percentage of oxygen in the bottled product has to be reduced to a minimum since it is a risk for preservation of the bottled beverage. The vacuum pre-evacuation system ensures removal of oxygen during filling to give a packaged product of international standards. Ideal for bottled beverages such as , Cola, Lemonade and Champagne. These Filling machines incorporate the latest in filling technology for carbonated beverages. The filling valves are designed to prevacuate the bottled before filling. This ensures very low oxygen content in the product as per international standards, and hence high stability and shelf life. The valves are suitable for filling under CO2 Counter Pressure. While using Co2 pre-stressing, one-third Air Consumption will be replaced by Co2. The equipment has Cleaning in Place (CIP) facility. The equipment has an automatic Central Lubrication System. The machine has safety cut off switches, Automatic Splinter Spray- off System, Height adjustment of bowl suitable for all bottled size up to 1000ml. These filling machines are designed for accurate level filling without beverages loss. Note :- Due to Continuous improvements, specifications are subject to change without notice. We also manufacture Vacuum Fillers, Tunnel Pasteurizers and Coolers, Bottle Washers, Premix Carbonators, Crate Washers, Cap Conveyors and Other Bottling Equipments.  

These compact and user-friendly shrink tunnels are used to pack products using PVC/POF/LDPE shrink films. The basic features of the tunnels are variable speed drive to control the speed of the conveyor, high velocity air cutter blowers for Uniform Airflow System, faster heating system, and variable temperature control. Some of the other optional features, which are available, are silicon sleeves for the conveyor rods, fully stainless steel construction, variable speed drive for the blower, in feed and out-feed extension conveyors, Mesh type conveyor, Roller type, Tefllon belt conveyor, etc., A speed of 2-4 packs / Minute. Sleeve Wrapper with Shrink tunnel : These model machines are custom made system for packaging of Products with Shrink Films with all sides sealing. The machine is automatic in process, with automatic conveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the sides of the pack will be sealed. These units are designed upon the size and quality item and the requirement of the customer. The system is suitable either for Independent use or can be utilized in automated production line. A speed of 4-8 packs / Minute. Sleeve wrapper for 4-side seal : These model machines are custom made system for packaging of products with Thick Shrink Films with all sides sealing. The machine is an automatic machine in process, with automatic coveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the side of the pack will be sealed. These units are designed upon the size and quality item and the requirement of the customer. The system is suitable for either for Independent use or can be utilized in automated production line. A speed of 2-20 packs / minute.    Automatic Cup Filling Machine is designed to fill and seal plastic cups automatically with speeds of 20 cups/min to 100 cups/min. Various model of machine are there to achieve the above speeds. The machine comes with either a linear conveyor or rotary plate.   The cups are loaded to the cup holders from the cups stack automatically. The cup holder carries to the filling stations where the cups are filled accurately. The filled cups are then provided with seals by a Pick & Place System. After which the sealing of cups are done by the cup sealer. The system is in-built with PLC control and Safety Protection Devices. Shrink Tunnel - Heavy Duty : These machines are rugged ones, which can run continuous for long hours without gap for chamber cooling. These machines are used to wrap heavy products with LOPE/LLOPE shrink film with higher thickness. Live roller rod conveyors are provided in the machines, variable speed drive system for adjusting conveyor speed, fully re-circulating heating air system enable lesser power consumption, highly efficient heat-up with heaters provided on three sides of the chamber, temperature controlled automatically, variable temperature controller, cooling chamber. A speed of 6-20 packs / Minute.   

HIGH SPEED CAPACITIES, SRM 224/ 236/ 240/ 260/ 280,   GERMAN TECHNOLOGY,   SUPER FLOW VALVE WITH VACUUM PRE-EVACUATION SEPPA is a manufacture of refrigeration compressed air dryers which is a perfect solution for clean and dry compressed air. SEPPA’s highly efficient and reliable refrigeration air dryers are the result of extensive research and development and in house design and testing. SEPPA air dryers provide a consistent due point of +30C compared to any other dryer. SEPPA use state of the art, refrigeration technology along with high quality raw material and reliable components for building most efficient and aesthetic air dryer’s. All our products meet international standards of quality and compliance. Our products and brands are well known in the market, and always associated with high efficiency power saving, aesthetic rugged construction, elevated performance, long life and low maintenance. Beyond this, our products are cost effective as we manufacture large number of equipments in house. Features: 1. Condensing temperature control for ambient temperature variations. 2. Hot gas bypass circuit for partial load. 3. Maintains constant pressure due point. 4. Compressor safety through high pressure cut off switch. 5. Automatic drain valve for effective dryer function. 6. High accuracy, PLC based temperature controllers.  Applications:

ROTARY RINSER FILLER CAPPER MINERAL WATER AND LIQUIDS (60 TO 200 BPM)       SEPPA Private Limited incorporated the state of art technology in design engineering of the systems being manufactured. Evats 1000 fully automatic bottling machine specially designed by SEPPA Private Limited for mineral water / carbonated beverages. The entire process has provisions in the machine for rinsing, filling, capping and sealing automatically. The entire process is fully mechanical with variable speed drive and gravity / counter pressure filling system. The total system is manufactured under technology transfer and technical collaboration from US Micron Inc. California U.S.A. the whole equipment is sleek and is capable of bottling various sizes of bottles ranging from 500 ml to 2 ltrs. The mineral water bottles are fed into the rotary rinser, filler, capper by means of an input feed conveyor. A star wheel then transfers the bottle to the neck holding robot of the rinsing station. The rinsing robot indexes the bottle 180 and activates the rinsing value. Bottles after being rinsed are automatically transferred by a star wheel to the filling station. In the filling station the bottles are picked up by the neck and are allocated individual filling values. The state of art filling valve is so precise and accurate it gives even filling in all bottles. The filled bottles are then transferred to the capping station via a star wheel. The bottles automatically move for the capping stage where the caps release from the vibrator on to the bottles. The caps are sealed automatically using special capping heads. The Evats 1000-60 Rotary is an unique bottling machine with in built High-Tech features. No bottle no wash, no bottle no fill and no bottle no cap are the standard features of the Evats 1000 -60 Rotary. The entire system is enclosed in a stainless steel / glass outer casing. After the capping stage the bottles are automatically ejected out to the out feed conveyor. Optional Features: Shrink Labeller is provided on the output conveyor. Ozone Jets to disinfect caps. Cap Elevator cum Sorter.   MODEL CAPACITY LIQUID CC 100- 60 SS 60 Bottles / min. Water / Non Carbonated Liquids / Juices CC 1000 - 60 SSC 30-60 Bottles / min. Carbonated Liquids and Beverages CC 1000 - 100 SS 100 Bottles / min. Water / Non Carbonated Liquids / Juices CC 1000 - 100 SC 100 Bottles / min. Carbonated Liquids and Bevarages CC 1000 - 200 SC 200 Bottles / Min. Water / Non - Carbonated Liquids / Juices CC 1000 - 200 SC 200 Bottles / Min. Carbonated Liquids and Bevarages

Our fermentation tanks are constructed using SS 304 or SS 316 as desired, designed as cylinder conical tanks with cone angle between 65 to 72 degrees. These tanks are equipped with dimple jacketed glycol cooling system and insulated with 50 – 60 mm poly urethane foam. Tanks are fitted with high quality solenoid valves that regulate tank temperature. The cooling surface includes the cone and cylinder area. Independent cooling for cone and cylinder areas can be optionally provided. All tanks are fitted with high quality RTD sensors for accurate temperature indications. Tanks are pressure tested to 3.0 bar and are fitted with a safety pressure valve set at 2.5 bar. Single or dual CIP spay balls are fitted for CIP operation. Overhead cross arm extending to the side is provided with a pressure regulating device and a sanitary air trap for releasing and regulating carbon dioxide during fermentation. Standard provision include front or overhead manhole opening. In the event the fermentation tanks is used as a uni-tanks for maturation and distribution, tanks can be fitted with python line outlet and carbonation inlets, and kegging outlets. Arrangements for applying counter pressure of Carbon Dioxide is provided in the cross arm assembly. Tanks are also optionally equipped with sampling outlets and inspection glass with light. Tanks are available from 200 liters to 2000 liters in the microbrewery range, and larger capacities for full scale brewery.

The Microbrewery Malt Mill machine is a pair of roller grinder whose product is rough broken malt. Its main gadget is its two cylindrical drums with the same diameter. The two drums rotate in opposite directions for generating extruding force and shearing force to smash malt. There are waves / grooves on the drum surface. The malt is broken between the two rotating drums the gap between the drums can be adjusted according to the requirement of the size of the broken malt desired for the brewing purpose.

These compact and user-friendly shrink tunnels are used to pack products using PVC/POF/LDPE shrink films. The basic features of the tunnels are variable speed drive to control the speed of the conveyor, high velocity air cutter blowers for Uniform Airflow System, faster heating system, and variable temperature control. Some of the other optional features, which are available, are silicon sleeves for the conveyor rods, fully stainless steel construction, variable speed drive for the blower, in feed and out-feed extension conveyors, Mesh type conveyor, Roller type, Tefllon belt conveyor, etc., A speed of 2-4 packs / Minute. Sleeve Wrapper with Shrink tunnel : These model machines are custom made system for packaging of Products with Shrink Films with all sides sealing. The machine is automatic in process, with automatic conveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the sides of the pack will be sealed. These units are designed upon the size and quality item and the requirement of the customer. The system is suitable either for Independent use or can be utilized in automated production line. A speed of 4-8 packs / Minute. Sleeve wrapper for 4-side seal : These model machines are custom made system for packaging of products with Thick Shrink Films with all sides sealing. The machine is an automatic machine in process, with automatic coveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the side of the pack will be sealed. These units are designed upon the size and quality item and the requirement of the customer. The system is suitable for either for Independent use or can be utilized in automated production line. A speed of 2-20 packs / minute.   Automatic Cup Filling Machine is designed to fill and seal plastic cups automatically with speeds of 20 cups/min to 100 cups/min. Various model of machine are there to achieve the above speeds. The machine comes with either a linear conveyor or rotary plate.   The cups are loaded to the cup holders from the cups stack automatically. The cup holder carries to the filling stations where the cups are filled accurately. The filled cups are then provided with seals by a Pick & Place System. After which the sealing of cups are done by the cup sealer. The system is in-built with PLC control and Safety Protection Devices. Shrink Tunnel - Heavy Duty : These machines are rugged ones, which can run continuous for long hours without gap for chamber cooling. These machines are used to wrap heavy products with LOPE/LLOPE shrink film with higher thickness. Live roller rod conveyors are provided in the machines, variable speed drive system for adjusting conveyor speed, fully re-circulating heating air system enable lesser power consumption, highly efficient heat-up with heaters provided on three sides of the chamber, temperature controlled automatically, variable temperature controller, cooling chamber. A speed of 6-20 packs / Minute.     

• Voltage220V
• Power220/440 AC
• PhaseSingle Phase/ Three Phase
• Operating TypeAutomatic
• Overall Length45mm
• Power SourceElectric
• ApplicationIndustrial

ROTARY RINSER FILLER CAPPER MINERAL WATER AND LIQUIDS (60 TO 200 BPM)       SEPPA Private Limited incorporated the state of art technology in design engineering of the systems being manufactured. Evats 1000 fully automatic bottling machine specially designed by SEPPA Private Limited for mineral water / carbonated beverages. The entire process has provisions in the machine for rinsing, filling, capping and sealing automatically. The entire process is fully mechanical with variable speed drive and gravity / counter pressure filling system. The total system is manufactured under technology transfer and technical collaboration from US Micron Inc. California U.S.A. the whole equipment is sleek and is capable of bottling various sizes of bottles ranging from 500 ml to 2 ltrs. The mineral water bottles are fed into the rotary rinser, filler, capper by means of an input feed conveyor. A star wheel then transfers the bottle to the neck holding robot of the rinsing station. The rinsing robot indexes the bottle 180 and activates the rinsing value. Bottles after being rinsed are automatically transferred by a star wheel to the filling station. In the filling station the bottles are picked up by the neck and are allocated individual filling values. The state of art filling valve is so precise and accurate it gives even filling in all bottles. The filled bottles are then transferred to the capping station via a star wheel. The bottles automatically move for the capping stage where the caps release from the vibrator on to the bottles. The caps are sealed automatically using special capping heads. The Evats 1000-60 Rotary is an unique bottling machine with in built High-Tech features. No bottle no wash, no bottle no fill and no bottle no cap are the standard features of the Evats 1000 -60 Rotary. The entire system is enclosed in a stainless steel / glass outer casing. After the capping stage the bottles are automatically ejected out to the out feed conveyor. Optional Features: Shrink Labeller is provided on the output conveyor. Ozone Jets to disinfect caps. Cap Elevator cum Sorter.   MODEL CAPACITY LIQUID CC 100- 60 SS 60 Bottles / min. Water / Non Carbonated Liquids / Juices CC 1000 - 60 SSC 30-60 Bottles / min. Carbonated Liquids and Beverages CC 1000 - 100 SS 100 Bottles / min. Water / Non Carbonated Liquids / Juices CC 1000 - 100 SC 100 Bottles / min. Carbonated Liquids and Bevarages CC 1000 - 200 SC 200 Bottles / Min. Water / Non - Carbonated Liquids / Juices CC 1000 - 200 SC 200 Bottles / Min. Carbonated Liquids and Bevarages

EVATS 1000 24 - 30 BPM RFC   SEPPA Private Limited is one of the member of the Shivsu Group of Companies. Canada Pure incorporates the state of art technology in design engineering the systems being manufactured by them. SCPF 1000 is a fully automatic bottling machine specially designed by SEPPA Private Limited for mineral water / carbonated beverages. The entire process has provisions in the machine for Rinsing, Filling, Capping and Sealing automatically. The entire process is fully computerized with PLC and Sensor Control with one touch instrumentation system under technology transfer and technical collaboration from US Microcons Inc. California. U.S.A. The whole equipment is sleek and is capable of bottling various sizes of bottles ranging from 500 ml to 2 Litres. The mineral water bottles are fed into the input feed conveyor of the SCPF 1000 systems. The bottles are first picked up using an automatic robot arm, which tilts the bottle on the top of rinsing spray, which rinses the bottles in three stages. The bottles are cleaned with ozonized mineral water. After rinsing the bottles are transferred by neck to the filling stations. Here the bottles are filled accurately by filling valves. The filling valves are very accurate and give equal filling to every bottle. The special feature in the system is that no bottle no wash and no bottle no fill. After filling, bottles automatically move to the capping stage where the caps are relased from the vibrator on the bottle. The caps are sealed automatically using special capping heads. A number of germicidal lamps are provided to disinfect the water from air borne contamination. SCPF 1000 is an unique bottling machine with in built High - Tech features. The entire system is enclosed in a stainless steel / Glass outer casing. After the capping stage the bottles are automatically ejected out to the output conveyor to the out feed area. Optional Features : Shrink Labeller is provided on the output conveyor. Ozone Jets to disinfect caps. Change parts for 2 Litres is not a part of the machine, it forms a separate detailed sets. Extra conveyor for Shrink Labeller. 

These compact and user-friendly shrink tunnels are used to pack products using PVC/POF/LDPE shrink films. The basic features of the tunnels are variable speed drive to control the speed of the conveyor, high velocity air cutter blowers for Uniform Airflow System, faster heating system, and variable temperature control. Some of the other optional features, which are available, are silicon sleeves for the conveyor rods, fully stainless steel construction, variable speed drive for the blower, in feed and out-feed extension conveyors, Mesh type conveyor, Roller type, Tefllon belt conveyor, etc., A speed of 2-4 packs / Minute. Sleeve Wrapper with Shrink tunnel : These model machines are custom made system for packaging of Products with Shrink Films with all sides sealing. The machine is automatic in process, with automatic conveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the sides of the pack will be sealed. These units are designed upon the size and quality item and the requirement of the customer. The system is suitable either for Independent use or can be utilized in automated production line. A speed of 4-8 packs / Minute. Sleeve wrapper for 4-side seal : These model machines are custom made system for packaging of products with Thick Shrink Films with all sides sealing. The machine is an automatic machine in process, with automatic coveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the side of the pack will be sealed. These units are designed upon the size and quality item and the requirement of the customer. The system is suitable for either for Independent use or can be utilized in automated production line. A speed of 2-20 packs / minute.    Automatic Cup Filling Machine is designed to fill and seal plastic cups automatically with speeds of 20 cups/min to 100 cups/min. Various model of machine are there to achieve the above speeds. The machine comes with either a linear conveyor or rotary plate.   The cups are loaded to the cup holders from the cups stack automatically. The cup holder carries to the filling stations where the cups are filled accurately. The filled cups are then provided with seals by a Pick & Place System. After which the sealing of cups are done by the cup sealer. The system is in-built with PLC control and Safety Protection Devices. Shrink Tunnel - Heavy Duty : These machines are rugged ones, which can run continuous for long hours without gap for chamber cooling. These machines are used to wrap heavy products with LOPE/LLOPE shrink film with higher thickness. Live roller rod conveyors are provided in the machines, variable speed drive system for adjusting conveyor speed, fully re-circulating heating air system enable lesser power consumption, highly efficient heat-up with heaters provided on three sides of the chamber, temperature controlled automatically, variable temperature controller, cooling chamber. A speed of 6-20 packs / Minute.   

Our fermentation tanks are constructed using SS 304 or SS 316 as desired, designed as cylinder conical tanks with cone angle between 65 to 72 degrees. These tanks are equipped with dimple jacketed glycol cooling system and insulated with 50 – 60 mm poly urethane foam. Tanks are fitted with high quality solenoid valves that regulate tank temperature. The cooling surface includes the cone and cylinder area. Independent cooling for cone and cylinder areas can be optionally provided. All tanks are fitted with high quality RTD sensors for accurate temperature indications. Tanks are pressure tested to 3.0 bar and are fitted with a safety pressure valve set at 2.5 bar. Single or dual CIP spay balls are fitted for CIP operation. Overhead cross arm extending to the side is provided with a pressure regulating device and a sanitary air trap for releasing and regulating carbon dioxide during fermentation. Standard provision include front or overhead manhole opening. In the event the fermentation tanks is used as a uni-tanks for maturation and distribution, tanks can be fitted with python line outlet and carbonation inlets, and kegging outlets. Arrangements for applying counter pressure of Carbon Dioxide is provided in the cross arm assembly. Tanks are also optionally equipped with sampling outlets and inspection glass with light. Tanks are available from 200 liters to 2000 liters in the microbrewery range, and larger capacities for full scale brewery.