SERVOCOM TECHNOLOGIES Coimbatore, Tamil Nadu

• Single phase capacity1 to 25 kva
• Three phase (air cooled)3 to 150 kva
• Three Phase (oil cooled)3 to 2000 kva
• Input voltage range170-270 Single phase 295-465 volts three phase 195-270 Single phase 340-465 volts three phase 205-270 single phase 360-465 volts three phase
• Special rangeAs per customer requirements
• Output voltage220/230/240 V AC in single phase 380/400/415 V AC in three phase
• SystemUnbalanced/balanced type
• ConnectionStar/Delta or Star/Star
• Output Voltage regulation(+/-) 1% from no load to full load
• Servo motor drive model -AAC Servo Synchronous Motor - Small
• Correction speedUpto 105 V/sec.
• Response time10 milli.sec.
• Servo motor model-BDC servo motor
• Operating frequency47 to 53 HZ
• Output waveformTrue reproduction of input
• InsulationClass "B"
• Short circuit percentage and period300 % for 250 milli sec.
• Overload capacity120 % for 1 minute
• Effect of load P.F on OP VoltsNil
• Waveform distortionNil
• Duty Cycle100 % continuous
• AmbientUpto 45c max above ambient Relative humidity upto 90%
• System constructionAs per IS:9815
• EnclosurePowder coated
• EfficiencyBetter than 98% (electrical consumption saved)
• EnvironmentDesigned for indoor / outdoor tropical use
• MountingOn wheels
• EarthingEarthing terminals provided

• Single phase capacity1 to 25 kva
• Three phase (air cooled)3 to 150 kva
• Three Phase (oil cooled)3 to 2000 kva
• Input voltage range170-270 Single phase 295-465 volts three phase 195-270 Single phase 340-465 volts three phase 205-270 single phase 360-465 volts three phase
• Special rangeAs per customer requirements
• Output voltage230v / 240 (+/_) 1% 1phase AC 380 / 400v / 415 (+/_) 1% 3phase AC
• SystemUnbalanced/balanced type
• ConnectionStar/Delta or Star/Star
• Output Voltage regulation(+/-) 1% from no load to full load
• Servo motor drive model -AAC Servo Synchronous Motor - Small
• Correction speedUpto 105 V/sec.
• Response time10 milli.sec.
• Servo motor model-BDC servo motor
• Operating frequency47-53HZ
• Output waveformTrue reproduction of input
• Insulationclass ‘ f ’ (Transformers)
• Short circuit percentage and period300 % for 250 milli sec.
• Overload capacity120 % for 1 minute
• Effect of load P.F on OP VoltsNil
• Waveform distortionNil
• Duty Cycle100 % continuous
• AmbientUpto 45c max above ambient Relative humidity upto 90%
• System constructionAs per IS:9815
• EnclosurePowder coated
• EfficiencyBetter than 98% (electrical consumption saved)
• EnvironmentDesigned for indoor / outdoor tropical use
• MountingOn wheels
• EarthingEarthing terminals provided  
• CoolingAir cooled / Oil cooled
• Capacity1Kva to 1000Kva
• Input Voltage140-270v / 170-270v 1Phase AC , 240-460v / 295-465v / 340-460v , 360-460v / 340-480vv 3Phase AC
• System-connections4 wire, RYBA, star
• Output voltage adjustable380v to 415 v AC in 3Phase 220 to 240v AC in 1Phase
• Output voltage regulation(+/_) 1% (any load)
• Correction rate35v/sec-1Phase 60v / sec-3Phase
• Operating Temperature0 ℃ to 50 ℃
• Humidityup to 95 % RH max
• Conforms toIS 9815-1994
• Transformer oilIS 335, IEC 296

Servocom Features:   Servocom Transformers are used to step up and step down the voltage for imported machinery and to eliminate all the negative transients in the electrical supply and also, to avoid the neutral wire problems, isolation transformers will be used where neutral wire is taken in the secondary usage.     Other Transformers are of Five Types:      Control transformers     Auto transformers     Step up transformers    Step down transformers     Isolation transformers

High Performance::   Power tolerance of to +3% provides a stable, high-energy system output    Better performance under low light condition     More power per unit area for cost effective     Engineering excellence:     Increased cell to frame clearance reduces the effect of soiling     High wind/snow load tolerance (pass mechanical load test of 5400pa) Reliability & Clarifications:   Product range : 20 KVAr to 5000KVAr    25 tears limited warranty on power output     5 year product warranty     IEC 61215, IEC 61730 Features:   Transformer with peak efficiency (96.0%)    Isolation of primary & secondary circuit     Wide operating temp.ranges:-25 C to +70 C     Full power up to 57 C (without de rating)     Rs 485 (ELA485) communication interfaces     Intelligent MPP tracking     Suitable for indoor and outdoor application (Ip65)     Without fan (for 2.5 to 9.9KVA models)     Simple and direct on-screen dada display (for 5kVA model)